Archive Read Only

Folks,I created some constraints and I am struggling to get the correct results, or should I say what I think should be the correct result.As you can see above, I created a rigid link between the Pin, Bushes and the Arm. I really wanted to create a pin but for some reason I could not get the results correct either.What I was expecting to see was some load going thru the pin, but I don't see any?Any ideas or help ? much appreciated.CheersChris

[cid:image002.jpg@01D06AD3.2E69E540]

One of our Product is giving this error when you try to add objects to a project.[cid:image001.png@01D067C7.DE2E3F30]I can add objects from a different Product to the project. So it's nothing to do with the project.What permissions would cause this? Every user we have tried is getting the same error, even admin's.David HaighPhone: 925-424-3931Fax: 925-423-7496Lawrence Livermore National Lab7000 East Ave, L-362Livermore, CA 94550

Hello everyone. I'm a student of mechanical engineering novice. I was assigned a project for a boxer engine 150 Hp but i have no idea of how it should be done. I was advised by my professor to look at some project of bmw engine or rotax 912 but i can't find anything. Could you help me and show me how i have to proceed? Thanks very much

Has any seen this error? "A problem has been encountered with the browser. Please restart application to access the browser again." Only some users get this error some of the time. Anyone know what may be causing it?Using Creo 2.0 M130 and PDMLink 10.2 M020

Creo Parametric 2.0, M130:If you delete a "SEE DETAIL A" note, is there any way to get it back?I don't see it in the "Show Model Annotations" dialog. I tried selecting the detail A view, then right-clicked, picked Add arrows - selected the section view. No success.I tried redefining the reference point, the boundary, the boundary type - no success.In older versions I could show all notes to get it back -- which had its own problems but at least I could get it back.Yesterday I ended up creating a new detail view, but goodness that's the hard way around. There has to be a better way.Thanks!Kind regards,Janet Grove

Are there any documents out there to show us what to do with the changes that where made? Dimensioning should not be this hard?

hi,how could i close annotation element display when i start pro-e?

Hallo zusammen,ich versuche hier eine Hohlkehle (Ausgleichsradius) zu erzeugen, aberdie Funktion will and dieser Stelle einfach nicht funktionieren.Da der Es... meist vor dem Rechner sitzt, bitte ich einmal zu prüfen, weshalb das nicht funktioniert.Ich benutze nach wie vor die Version 4.0 kann aber auch Daten von 6.0 einlesen.Hier also die Daten als Bild und als Datei.Mit GrußWerner

Hi, I'm Anil I want to know the how to create coil (Mosquito) in creo

Thanks All, I made a rookie mistake. I listened to the kid who told me he was online. So when I went to investigate the problem I never checked the online status which I thought was the problem in the first place. I took him for his word and assumed he was online. So now the old proverb comes true and two asses were created. (Really it went 4 asses deep) One with the problem who at some point answered YES to work offline, One who should be helping with these problems, one who was reached out to by the second and then finally me who ultimately got involved.Again fantastic exploder. 2 minutes to the correct answer. Even if I did know it before the problem even started.NOW for the bad news. I got answer in two minutes. My coworker, the one who should be helping with these type of problems, (without me knowing as it should be) had asked this question to the PTC community Windchill web site yesterday. And he still has no answer. He has had his post viewed 7 times 4 of which were him. That i

I have a problem with one of my users getting the wrong default display look to his work space window. This same problem also is a problem in that it will not show anything from the Windchill Cabinets. Does anyone have an idea how to change this? Or where it gets set?[cid:image001.png@01D067A4.B85C0440][cid:image002.png@01D067A5.D6444ED0]Ron RichMechanical EngineerKeithley A Tektronix Company28775 Aurora RdSolon, OH 44139440-498-2842

Hi,My Creo won't start....I think it's a firewall issue.Is this the port number Creo uses?-- Carl LeverYorkville SoundTEL: 905.837.8550 ext. 222FAX: 905.837.8746clever@yorkville.com

I'm trying to solve an interesting new case today.Fill in a glass with a certain volume of water. I would like to change the quantity of water easily by parameter: any idea how to create a solid of the water constrained by the glass shape and the desired variable volume?

Hello,I do not know how to do this type of grooves. What is the most appropriate tool for this kind of circular grooves?Thanks a lot for your help.

hi,how could i put the message line under the window in pro-e 5.0?

Hallo zusammen,ich habe das Problem, daß sich zwischen zwei 3D-Splins keineFläche einfügen (spannen) läßt.Bearbeitet habe ich die Geometrien mit der Expressversion V4.Welcher Geometriefehler liegt vor, daß dies nicht gelingt?Ich lege die Datei und ein Bild bei.Mit GrußWerner

Hallo!jeder von meiner Baugruppe hat einige Paramtern. Ich möchte sehr gerne in meiner Zeichnung von der Baugruppe ein Stückliste haben die die Parametern von die Teile enthalten. Ich habe im internet viel gesucht und was gefunden, dass ich die Spalten von Parametern an die Baume dem Teil hinfügen muss. Und dann an der Zeichnung, "Tebelle aus Datei" ancklicken und dann sollte ich suchen auf ein Zeichnung Tabelle in Bibliothek.. Ich habe aber dieses Tabelle Datei in meinem Rechner nicht. Diese Datei die ich bräuchte heißt struktursrk_a4q_alles.tbl Kann ich diese Tabelle irgendwo kriegen oder gibt es ein andere Weg dafür.Vielen vielen Dank.Beste Grüße,Edna

Bonjour,Je souhaiterais inverser les lignes de fuites d'un assemblage. Ici on peut voir que l'arrête 2 parait plus grande que la 1.Je souhaiterais inverser cette perspective pour que l'arrête 1 paraisse plus grande que la 2.Cordialement,F.Delaunay

Hi,I have a problem, because my thesis supervisor uses Creo Elements/Pro 5.0 and I need to work on some files from his computer.As I see, there is only Creo Parametric 3.0/2.0 or 1.0 avaible for student to download, and they are not compatible.. Where can I get Creo Elements/Pro 5.0 from?And he has commercial version. Is there any way to work on his files using student version?

Hello People,I have a sheet and a 3d Curve - Continuous, smooth curve.I intend to curl the sheet along the curve.Please assist me with complete procedure.Thanks in advance.

Funny that this happened the day after the spam attack on PTC Community and all that email is getting blocked as spam by my system. It’s awesome.Stephen Williams | Mechanical DesignerNOV Rig SystemsOffshore6930 N. Eldridge Pkwy | Houston, TX 77041T 832.424.6285E -National Oilwell Varconov.com/offshoreConnect with us on Facebook<">https://www.facebook.com/NationalOilwellVarco> | LinkedIn<">http://www.linkedin.com/company/national-oilwell-varco?trk=tyah&trkInfo=tarId%3A1405455811306%2Ctas%3Anational+oilwell%2Cidx%3A2-1-4> | Twitter<">https://twitter.com/NOVGlobal>The information contained in this transmission is for the personal and confidential use of the individual or entity to which it is addressed. If the reader is not the intended recipient, you are hereby notified that any review, dissemination, or copying of this communication is strictly prohibited. If you have received this transmission in error, please notify the sender immediately.

I am unable to sketch anything in any plane please help me in resolving my issue.

how is this still not a thing in creo,the amount of time wasted making a sketch to drive a work plane that is centred between two surfaces could be calculated in hrs per year.this stage is a total waste of time, when all i want is thisdose anyone have a macro or something to do this?

upgraded to 3.0 from 2.0 and now some of our offset lines have lost references. is there anyway to fix these without deleting them?