Archive Read Only

HalloDank der Hilfe von Friedhelm konnte ich einiges erreichen. Bin immer noch sehr unsicher mit diesem Programm.Gibt es eine Möglichkeit, dass ich WP auch Spiegeln kann? Möchte beispielsweise w.2.3.1.1 an WP w.1.1 spiegeln, damit ich den Kreis exact Spiegelbildlich auch habe. Natürlich könnte ich den Umweg über eine Drehung gehen. Dazu müsste ich aber eine Drehachse noch definieren.... (Wie mache ich dies am besten an meinem Modell?).Frage an die Profis, die mir bisher geholfen haben. Bin ich eigentlich auf dem richtigen Weg mit Creo mein Modell zu modellieren?Vielen Dank an alle für die wertvolle HilfeAndy

WF4, unfortunatelyI have two gear based parts that have pro-program input sections in them to define the gear teeth.  These are molded parts and now tooled, but every time I regen the assy they prompt me for new values.  I'd like to remove the prompts but I'm not familiar with pro-program.  What do I need to do to eliminate them?--

Can someone help me understand why the output from 'Analysis - Geometry - Curvature' doesn't look "smooth" (tangent). The geometry is constructed from 3 splines and 3 radii with curvature continuous attachments between them. Thanks.Tom U.[cid:image005.jpg@01CEBA94.87281440][cid:image007.jpg@01CEBA94.87281440] [cid:image009.jpg@01CEBA94.87281440]

how to open pro-e & solid-work file in creo2.0?

Wayne,A couple points of clarification.1.) When viewing past events in the event manager you can change the view to only show events for the current workspace. This makes it much easier to follow.[cid:image003.jpg@01CEFD70.807FB2A0]2.) Rolling back to a previous event will not change any committed server side actions like check-in or new revise. It will however un-check-out things. The workspace will go back to showing the version of the objects that existed during the frame creation, but keep in mind that those versions may no longer be the latest.3.) You can go back and forth between older and newer frames repeatedly (unless you do something to an older frame that makes going back forward not possible.)Checked out and modified objects:[cid:image005.png@01CEFD6F.3B3F89A0]Rolling back to an earlier frame un-checked-out the objects and reloaded earlier versions:[cid:image004.png@01CEFD6E.C261EAF0]Returning back to the latest frame takes us back where we started, but without the objects

I have1. installed the language pack2. changed the emvirmental variable (both LANG & PRO_LANG)3. added "ENV=PRO_LANG=chs" to the end of the pro1.psf file4. used command line like set LANG=chinese_cn"D:\Program Files\PTC\Creo Elements\Pro5.0\bin\proe.exe" "D:\Program Files\PTC\Creo Elements\Pro5.0\bin\proe1.psf" %*5.modified the following options msg_translation' & "menu_translation6. restarted the computer7. or even restalled the application (the setup shows the correct language, though)Unfortunately, nothing does the trick.Any idea?Thanks.

This really should have been posted as a discussion.Adnan is trying to create the relation so the sketch below will wrap accurately around the cylinder.What is -your- method to capture the cylinder diameter and specify the sketch relation so it can be wrapped, and later patterned 8x.The idea is that you have a fully tangent serpentine wrap around the cylinder.ref:

I have problame with shading view it do not show some surfaces of solid model.......

Bonsoir à tous,Travaillant sur mon projet de 2e année de Génie Mécanique, je dois modéliser plusieurs pièce contenant des taraudages. Je commence mon travail sur les PC de l'école, tout va bien... Je rentre chez moi et je continue mon travail sur mon PC (équipé de Créo 2 paramétric, la même version étudiant qu'à l'école). Je vais pour faire un taraudage, je clique sur la fonction "Trou" puis je sélectionne "Créer un trou standard", normes ISO, M10x.75. Mon taraudage ne s'affiche pas, je le place en espérant qu'il va s'afficher... Jusqu'à ce que je me rende compte qu'il a un diamètre de 0.3642 mm, complètement inchangeable (dans l'onglet "Forme", le diamètre est grisé, ainsi que "Filetage débouchant"), et sa profondeur est de 0.87 mm. Si je veux changer cette profondeur, il me dit qu'elle doit être comprise entre 0.0208 et 0.9806 mm... Enfin quand je clique sur le bouton vert pour confirmer le taraudage, un message d'erreur apparaît qui dit "La régénération du modèle a échoué. Cliquez s

Hi,I am running a static analysis in pro mechanica Wildfire 4.0. I want to measure stress in a particular direction and at a particular location in the model.Can anyone help me out with this?Thanks and regards,Anurag

All:Does anyone have any fresh intel on the release of Datecode m090 of Creo 2.0?Last online news I read was a project date of 20 Dec 2013, but it is not showing up on PTC.com yet.TIA and Merry Christmas.

Is there a way to set up a note with two leaders?

Hi,Thanks in advance, I am working in asynchronous application and creating the application in VC++ 2010, I need the initial settings for the executable (exe) application settings for the linker and also the pre processors.

I have a model in creo and wanted to convert creo file in to .BIM file. Is it possible in Creo or I need to use some external converter? I searched online and found that Autodesk Revit can create .BIM files. Is that the only option we have. Any suggestions will be greatly appreciated.Thank you

Hi,Thanks in advance,I am using Creo 2.0 and Toolkit available for the asynchronous application, I am unable to build the application written in VC++ using visual studios 2010, IO am getting Linker error like protoolkit.lib and says that found external reference found _ProEngineerStart in main.obj. Please help

Does anyone have any ideas on how to workaround Creo not having a "Inverse Selection"?Or any other selection workarounds/tricks?Thanks.

is their any way through which i can bring back pro-e wildifre 5.0 background colour in creo 2.0 because their is only two colour option available in creo 2.0 1.one is white background ( u cannot work continously in this background as it is harmfull for eyes)2. and other is balck background which is really annoying while in modelling

Has anyone yet to use or test Creo 2.0 M080 with IE 9 under Windows 7? What are your experiences? We have experienced some checkin issues with Creo 2.0 M040 WGM and PDMLink 10.1 M040 when using IE9 and I am wondering if these issues are fixed in Creo 2.0 M080. During checkin we get sometimes the spinning wheel and after some long time Creo 2 M040 does not respond and/or we lose connection to the PDMLink server. Any feedback is greatly welcomed.Best RegardsDavid Rodriguez

Good morning,I'd like to find the step_config.pro file in my ProE directory but without success.Does anybody know where is located this file ?Many thanks for your help.

Hello again Has anyone noticed a different type of arrow head in sketcher? What does itmean? Check out this image: Thanks , -Nate

Many of my existing mapkeys automatically seem to do what I want , like my plane mapkey toggles on and off with the same map key... What is the process to create a new mapkey that toggles an option on or off in Creo2 (many of my existing ones have broken and I want to add some more to enable me to spend less time in the ribbon). I don't want to have to create two mapkeys,one for "on", one for "off". I am guessing I need to manually alter something within the mapkey string of the configuration editor? If so, does anyone have an example they care to share?

Has anyone tried this before and gotten it to work. I keep receiving a error on the line send_mail options. I assume the error resides in the options area. So I turned on VERBOSE so I could look at the trail file. But I do not know where the trail files is stored.

Hi folks,How to make this type of cross-section?Can anyone help me?ThanksAraviK

Hi folks,Is it possible to place a sketch in symmetry with the reference of centre line?Not by manual adjustment. I am looking for some automatic symetry option to place a sketch.let me know if any option there or not?Aravik

Hello!There is a possibility to set the display style of the model to shading?Thanks, Lars