Augmented Reality

Hej guys,we received the feedback that voice commands were not recognized appropriately within the View app (the app commands).The reason for that were the privacy settings in the hololens.So the settings should be updated to:Settings/Privacy/Other devices/ThingworxView -> on  Should look like this:

Dmitry Ushamirsky​ gave me a ThingMark with an experience he published of a large assembly.  I find loading it in the HoloLens viewer to be particularly difficult.  I launch the viewer, stare at the ThingMark, wait for the model to start loading, and it just doesn't.  Tonight I tried loading it several times.  It would register the ThingMark, the green hexagon would start tracing (several feet below the ThningMark on the table top), the assembly would start to load, but then just vanish.  If I moved around, I could still see the green hexagon (between the tables and chairs).I've gotten it to load once, but the experience was very poor.  In that instance the model was highly detailed and beautiful to look at, but it would stutter and drift around the room.  Granted, it was a low-light situation, and I'm looking forward to trying again with better light.What are the commands that allow re-scanning, to realign with the ThingMark and the room?  What

I'm looking for a reference guide to the css styles I can use on tabs widgets.  Is there anything available? Any good examples to learn from?

Hello,But i don´t know how i can make it slideshow like your experience.Can you tell me how i can do it slideshow in thingworx studio ?Here is thingmark what i mean.Thanks

Ravindra Singh already posted in Thingworx bundled with Thingworx studio throwing error.Is there a solution for this, because I get the same error code when updating multiple properties via HTTP PUT.The Response code is 200 OK, however the application log says:EventRouter is over capacity - events being rejected Task com.thingworx.system.subsystems.eventprocessing.EventInstanceThe thing is, this error occures 4 times for each HTTP PUT request I send. I tested it with only one Property and the request interval was 2 seconds.

I want to make an experience where I want to write some message and some other user who is using the same experience will get that message and will be able to reply back.Is it possible? Any kind of solution is welcome...Thank you...Regards,DipikaMessage was edited by: Sushant Pandey moving this to ThingWorx Studio for correct visibility.

Hello everyone,   I would like to understand how thingworx studio deals with textures.   I have a 3D model of an hotel room, made with Revit, and exported in .FBX and .OBJ with 3DS MAX. When i open those files with any soft, i do not have problems to get the textures:     but with Thingworx studio, i can not find them :   On the right this is the FBX, on the left, the OBJ (some objects are black in the OBJ, i don't unterstand why either...)   I found a previous topic on this forum with an exemple : Publishing an experience with a model containing decals I have tried this exemple , with success, but i can not apply the same process on my file...   This is my first experience with Thingworx Studio, but i will not be able to use it if textures do not work 😕 ... So any help would be welcome   Here is a link to dowload the files i used in case someone want to give it a try: http://cloud.syntesia.fr/data/public/05d4fb.php   Thanks in advance if

If you like ThingWorx Studio, please help us win the 2017 Auggie Awards for “Best Authoring and Publishing Tool”!Cast your vote for ThingWorx Studio here:  https://auggie.awardsplatform.com/entry/vote/DJlABlgr/oAamGpjA?search=67fec4f78c5904d2-2 

How to make a 3D label visible with a javascript ?Thanks~ Francois

Hi,I'm new to Thingworx Studio. I want to create bar chart using external data source(excel).Can anybody help me in developing this experience?Thanks in advance.-Saravanaraj S

Hello all! Which kind (models) of augmented reality glasses/eyewears does ThingWorx View support? (EPSON BT-200, ODG R-6/R7, Goggle Glass or something else or  Samsung Gear VR, Google Cardboard)? What do we need to apply in ThingWorx Studio for 3D-scene preparation for any kind of AR "glass"? Now we are using both iPAD Pro and Samsung pads for demonstrations but our interests in AR implementation during MRO and services. Operators need to have "all hands free" and it means we need to use  digital eyewear devices (glasses or helmets...) We know about ability of Vuforia SDK to display stereo AR on  "Optical See-Through"-devices (such as Epson Moverio BT-200, Osterhout Design Group ODG R-7 or Microsoft HoloLens) or "Video See-Through"-devices (Samsung Gear VR, Google Cardboard etc) but thus ability supports on Vuforia+Unity. We need to do it on another AR platform - ThingWorx.

Hi,     I have received my login/password to access to ThingWorx Access Trial (it's correctly  install, OK for use and to publish ThingWorx Studio for the three ThingMark) but I have neither received (by Email) all ThingMarks (ZIP file)   I have this information by Email but I have only 3 ThingMarks to download in Thingworx Studio Configuration (the one, second and third Third Thingmark in my serie)   can you explain and help me to obtain others ?   Thanks Herve

Hi,I am creating a initial project to add Grid , buttons, labels , checkbox in my eyewear project.I can't see option to add 2D widgets in ThingWorx Studio?Can't we add 2D widget for HoloLens Project ?

It seems like none of the gestures are working.

Hej everyone,if I create a hololens project - and accidentially choose a name that I already gave to an AR standard project it's showing the uploaded files of the AR project - and messing up it's creation.I guess it's a bug?martin

HiI am new at using Studio and learning by using remote control exercise. I have a problem in that I cannot see pvi file when I clock sequence URL drop-down. Here' what i am doing -Under Resources, I select + and added pvi file. I see pvi loaded under 'resources'.On the right panel under 'Model Details' I use drop down 'Sequence URL' and do not see pvi file as is being suggested in the demo exercise.Please guide me as to what I am incorrectly.Thank you for help.

I am looking for best practices on how to work with model-items with the purpose to use the occlude attribute to hide parts of included parts. I have created an assembly sequence for a customer as part of a POC and in most of the steps I use “fade in” and translate to position the part.The idea is that this should be an interactive assembly instruction so that after each step the physical part should be in the correct position and therefore I need to use model-item and set the occlude attribute to true for each assembled part/component. - so quite a common use caseWhen I created the experience I was able to get this to work by setting visible=false for all model-items from start and then change it to true at the same time as I set occlude=true for the model item representing the part that was assembled. After an update this did not work anymore – the “fade in” in the Illustrate sequence did not work anymore as the visible attribute of the model-item wins in this case. I was able to get

I setup windows device portal, connected to my hololens and tried to record including hologram . .recording works but cannot see the hologram in the TW View experience .. other menus on the hololens appear no problem during the recording.

Hej everyone,Maybe I’m blind but I’m missing the “gaze at sth. and click” functionality from the hololens (like in the main menu) integrated in Thingworx View.I see there is the clickJS on each modelItem, 3DImage etc – but I can’t get it working with the glasses – just in preview.The control via gestures and voice is nice – but from my perspective the click is still needed and would be very handy.Is there any way to make the click working currently?Is it on the roadmap?ThanksMartin

When i make a PVZ export in Creo Parametric, of a rep with envelope parts the model is empty in ThingWorx Studio.Same export, but master rep, model is ok in Studio.One problem, my models are to big to load in master rep When i export in Creo 4 a A.R., no problem, envelope parts are shown.

I have been using ThingWorx Studio for around a week, it stopped working for what every reason. so i am trying to reinstall it. I seem to been having a problem reinstalling it.Application cannot be started contact the application vendor. attached is the log file can any one help i was doing so well!Message was edited by: Sushant Pandey moved to ThingWorx Studio Community

Greetings everyone,Let me introduce you to the situation I'm in, briefly.I have installed Composer and Studio on my machine, created a Thing with few Properties and would like to import these in Studio.When I change server address to local instance of Composer (http://localhost:80), I am able to load data from Composer but unable to publish experience because I don't have Experience Service (ES) server on my machine.Since I don't have an option to create ES, how am I able to import data from Composer to ES https://xxxxxx.pp.vuforia.io/​ given by PTC?Regards!

While we were a little slow out of the gate, we did eventually publish several models. We had assumed we could just republish our existing experiences, but then read the notes more closely about how that wasn't possible. Our first model was a relatively small assembly, and it loaded quickly. Then we published three different LODs of a full spacecraft model. All 3 models loaded relatively easily in the HL. I believe the largest took about 45 seconds. We will share our initial observations about image quality and ability to manipulate the model on Monday. We want to make sure we aren't overlooking an instruction first. All and all, not bad for day 1.

Hello ThingWorx community!I  just installed the ThingWorx Studio (v1.11), and had a quick question. From what I can tell, ThingWorx Studio sets up a local virtual environment, which then opens the "portal" located through localhost:3000.We have other applications that use that directory, and it is causing a conflict... so I was wondering - Is there a way to change that port number to something else? I've poked around briefly, and thought maybe there would be a setting located inside of my "ThingWorx Studio.exe.config" file, but have not found any way to easily change it.Thanks,James

Purpose: Cast hololens screen in real-time so other people can see what's in front of the Hololens user.Microsoft APP "microsoft hololens" can do thisProblem:Cast screen before starting the Thingworx app on the hololens >> Thingworx app on the hololens can't read the ThingmarkCast screen after starting the Thingworx app & scanning the Thingmark on the hololens / starting AR >> user can see the AR but the AR is not casted to the hub/computer.Koen