CAD

Hello, I would like to create a custom legend that uses the values ​​of an attribute from the EPMdoc, except that I would like to limit the number of decimal places displayed or remove the zeros.see image in attachments 0.940000 should display as 0.940.600000 should display as 0.60.900000 should display as 0.9 Is there an argument that allows us to master this?regards,Arnaud 

I am running Creo 10.0.6.0 in combination with a CAD management system, OpenBom we are going to be moving to a better system Windchill or team centre.We also use Github to share config files.I found that I could add exit counter sinks to holes something that we had not used so instead had an unattached note added to a hole note stating both sides for a double countersink.We use a combination of simple holes which I also parametrized and ISO standard holes.  In this image it shows the exit countersink option greyed out as its not a through hole which I understandIn this image that option is gone, Why?I am in 2 different sessions both in Creo 10.0.6.0. The first image was taken with a part outside OpenBom and the second was in OpenBom, though I don't think that will affect anythingI initially thought that it was due to Creo versions but when I updated to Creo 10.0.6.0 from 10.0.3.0 on a test laptop it did not have the option. What is defining whether exit countersink option is

Hi all,I have an assembly and its associated drawing with same name. I'm trying to develop a toolkit program that replaces assembly component using interchange groups. The assembly updates succesfully, but when I checks the drawing, the dimensions turn purple indicating that the references are being lost. But when I try to perform the exact interchange group replacement manually through Creo UI, both the assembly and drawing updated correctly with no issue. Below is the simplified version of my implementation:Modify skeleton and Regenerate the assembly.ProSolidRegenerate((ProSolid)asm_model, PRO_REGEN_NO_FLAGS).Replace the component using ProAssemblyAutointerchange().Regenerate the assembly (ProSolidRegenerate(asm_solid, PRO_REGEN_NO_FLAGS).Refresh the model tree ProTreetoolRefresh(asm_model).Set the current window to drawing window(ProWindowcurrentSet)Activate the drawing window(ProWindowActivate)Regenerate the Drawing sheet using ProDwgSheetRegenerate()I've tried various co

I noticed in Creo 10 that if I save a model tree configuration showing specific columns etc, that it is saving as a .ui file. It appears to me that this file is saving more than just the columns displayed in the model tree, it's saving all the modifications to the .ui that are present in the current session of Creo.  I find this a bit disconcerting. I only want to have a file that changes what columns are displayed in the model tree. Which is what the .cfg file did and still does in Creo 10, but there appears to be no way to create a .cfg file in Creo 10.  We have in our loadpoint a .ui file that all users see. Then in the cache location we have a .ui file that is specific to that division. Both of these are really only to adjust what additional tabs are in the ribbon, but I found out today that they don't just control ribbon, they control all aspects of the Creo UI.  We have different startup for editing the ribbon, one for the load point ribbon, one for

Hallo We are working today to reduce 2D drawings in our company. I have created a template part and try to export it as s STEP and as s PVZ but I can't see, in Creo View, the combined states when I export a step file,  but can see them with a pvz I have try all possibilities in the Stp option  like ap214_is, ap203_e2 ap203 etc.. nothing work see also  the export_pvs.rcp any suggestion?   thanks for your answers   regards Vero

RENDERING issue. How can I make it look better?. Cannot change my Graphic Card, Cannot change my laptop DELL P7770. Please drop your comments for better pixel picture. See Image  THANKS IN ADVANCE

I am trying to put up gd&T in a drawing which was prepared by someone earlier. Now when I put any gd&T the primary unit 0.001 the secondary unit comes to be [0.02] instead of rounding up to 0.03. In previously made drawing the values are rounded up. See attached image. The red encirceld one is the new gd&T I put today.Does  anyone know how can I round it up? I am using Creo 4.0.Any help on this is highly appreciated. Thanks so much!

Hello, I am not able to unlock protoolkit and getting error message. error attached here.Is this need separate license or Creo license is enough to unlock?

Hi,We have MathCad Prime license. Please help me find the Mathcad Prime version 10 to download.Kind regards,Xiaojiang

Hello, I have an assembly that includes various fastening elements such as bushings, bolts, etc. I would like to create a workshop drawing, just for the bushings. On one sheet, I want to have all the bushings that are in the assembly, with different views, and a table with the name and quantity of each bushing in the assembly, and of course, marked with a BOM. I am trying to do this, but I am having trouble linking the table to the assembly and individual parts. Is it even possible to do this? Thanks ! 

Cannot open native: SW2022*.sldprt, *.sldasm files in Creo9 - keeps showing error:'M059183C001.SLDPRT' cannot be opened because it was previously opened using newer release of Creo.'M047886C001.SLDASM' cannot be opened because it was previously opened using newer release of Creo. We were able to do this in the past with no issues We are using: Windchill 12.0.2.7, SW2022, Creo9, WWGM13.02.1 any ideas on what might have caused these files to not open now in Creo9?seems to be a  Windchill issue?  thanksRich 

IFX in Creo 10.0.4.0When using IFX it standard creates holes in modifiable parts. When you don't want that you have to set it manually each time to "Do not create a hole".Is it possible to have it default always set to "Do not create a hole"  for all parts? 

I have a problem with the mouse in the mould base definition window, when I place the mouse over a plate it does not select to select it I have to move it either to the side or higher up,has anyone ever had this problem? if so how did you solve it?i have also tried with older versions but always the same problem.

I wanted to check if the following workflow is possible using Creo and Mathcad, and whether any customization is needed.Use Case:Let’s say I am designing a pressure vessel, where key parameters such as diameter, height, and thickness are determined through design calculations.Now, the thickness is calculated based on a formula in Mathcad, and I do not need to create a 3D model of the pressure vessel. Instead, my goal is to directly generate a 2D drawing in Creo, where dimensions like thickness, height, and diameter are taken from a linked Mathcad worksheet.My questions are:Is it possible to use output variables from a Mathcad sheet directly inside a Creo 2D drawing to control dimensions?Can this be done without creating a 3D model?Does this workflow require any customization or special setup?If it’s possible, could you please guide me on how to link Mathcad with a drawing and control the values dynamically?This workflow is quite relevant for many industries (especially pressure vessel

Hello all,I wanted to ask how you handle additional 2D symbols such as arrows, annotations and other image additions. I am thinking about creating a whole range of helpful 2D symbols. For example, all kinds of arrows and also a bin. I find that helpful sometimes. Of course, such things can be done later with another tool during further image processing, but we would like to do the complete image creation in CI if possible. My questions:1. how do you deal with this issue?2. is it possible to rotate inserted 2D symbols? This would be very helpful for arrows.3. is it possible to change the order of the inserted 2D symbols. The last 2D symbols inserted overlap the previous ones, and sometimes rearranging them would be helpful. Thanks and best regardsRamon  

Hi,The visual quality of chart components (MathCad 10) when printed (pdf) seems not as good as that of "standard" plots, and changing dpi in printer settings didn't help there.Is there any tip to improve this?Thanks for your help,Cédric

I want to keep EI as EI in my calculations, as EI was defined previously. wondering if I can do that, and then I also want to extract 0.5 values out, because these are my Distribution factors. so I want to be able to type DF_BA = 0.5. 

EMailMessage 526 Authentication failure

Hello Community  Till date I am using Creo Parametric 6.0.6.0. but since last few days I am using Creo Parametric 11.0.3.0. I make model which have 2 machining operations in single model. I want to make individual drawing for both operation with machining symbol so I used family table and make two separate part for both operation. When I created drawing of both part and place machining symbol on machining surface. When I place machining symbol place on second machining operation face (in instance part drawing), obesely which surface not show in my generic model. So when I opened my generic model meanwhile second operation machining symbol failed in generic model. I attached images for reference. Please help me how to solve this problem. Thanks in advance.            

I am in Creo Parametric 9.0.8.0. I am attempting to generate an MCD in Creo NC. I am able to generate an NCL file with no issues. However, when I try to generate an MCD file, after all of the prompts, I check my working directory and there is no file for the g-code output. I have attached an image of the log. Am I missing something here? 

Good Morning, Community,Would anybody be kind enough to help me on how to create a table in Mathcad Prime 8. Please see below.Thank You, Boyer

Hello, Very new to the software which I plan to use as a worksheet for exercises, so the following may be requiring a very simple solution.I am using Mathcad Prime 9.0.0.0. I am trying to solve an equation both symbolically and numerically (?):I don't seem to be able to get a result and I also don't seem to be able to use = instead of :=. Any help?Thanks!

Hello.I'm using Creo Elements/Direct Modeling (x64 edition) Revision: 20.1.2.0, and every time I export a SLT file, I need to change the maximum deviation value. Is there a way to lock these values to create a default parameter? 

I was trying trigonometric functions in Mathcad & for some reason I couldn`t get these results/values in fraction mode. Is there a way to enable them? I couldn`t get it in Math Formatting Tab as well. Please feel free to share your thoughts.- Srikar

Hi I am currently working on CREO 11, when calculating mass properties for any CAD file, the results always comes up as scientific notation (MASS = 6.0445521e+01 GRAM ).I tried looking and adjusting descimal dislplay in the configuration but it does not affect the mass calculation results.scientific notation results                Is there a way to get the mass calculation as:MASS = 60.445 GRAMThanks