CAD

I have a question >> What it is the difference when mathcad write the unit of a resulte inside the brackets [result*Unit] and outside [result]* unit?is there any difference ? and how to make all units showed the same way?Thanks in advanceYusra 

Few Suggestions1. Custom page size not available. This is important because for display of the final output for custom size cell device or iPad etc a teacher need that.2. Certain drawing elements are not available like arrows, rectangle, circles, line, dotted line, etc which are necessary for final formatting of the document. These elements are needed to highlight the certain area which is more important.3. Two files cannot be displayed separately, like I am working on file and looking at some other file at 2nd extended display.4. Certain fonts are not available, although installed in the computer like Aptos.5. Step by Step approach is not available, I am sure if this is provided in the software this will greatly enhance the market growth especially the university students and teachers.6. Math cannot be inserted in text box. This can have advantage since the problem or numerical which have text and math together is certain need of a teacher where he need to change the value of a certai

I would like to reinstall Mathcad 14.0 M020 on Windows XP in Oracle VirtualBox.During the installation I first enter the product code: JW140906EA7617-V4WC-W9DPWhen starting, Mathcad wants to have a licence file.When I select the existing file, I get an OK at first.But when I start Mathcad again I get:The licence you have requested contains an errer.When I try to activate Mathcad directly over the Internet I get:The remote server returned an error: (403) Forbidden.Can you please help me.and send a new licence file.

How the variable vector can be plotted on 2D xy plot    

Hello guys, I'm new into Mathcad Prime and this community, so please bear with me. I'm trying to make a template to solve systems of linear equations with the Gaussion Elimination method. I would like to know, if anyone in this community has a template to solve any kind equation systems with Gaussian Elimination? I have attached a file with a system of equations, that I would like to solve with such template. Thank you! PS: I use Mathcad Prime 3.1

How would I read a parameter that is located in the part from the drawing?I have a drawing open and active and with JLink I want to read a certain parameter that resides in the Part not the drawing.I can open the part and get, but I would rather do it from the drawing so I don't need to open part. Is this possible?Thanks

Hello everyone,in the attached file, i am not understanding how the program r2 iterates.Could someone please explain why I am receiving the same options multiple times in the output.Attached Mathcad 10 sheet. 

Hello Community It is our industries requierement to add a caption to each illustration, to give information about projekt number etc. This caption is invisible when the CGM files are published as PDF (screenshot: "pdf from illustrate", compare to screenshot: "cgm in illustrate").The text of the caption can be found and located through the search function in the PDF but it can not be made visible.My workaround is to create the files in Creo Illustrate and save them as CGM - then open them in Isodraw only to save them as CGM again. With this extra step the caption stays visible in the PDF (screenshot: "pdf from isodraw"). It seems that Creo Illustrate marks the Caption as metadata, so that is not to meant to be seen.Callouts always work fine, btw.I tried several softwares to create the PDFs, so the issue has to be somewhere in Creo Illustrate itself. I am using Creo Illustrate 11 and Isodraw 7.4. Any idea how to solve this is very appreciated.Kind regards

Creo 8 I am showing Datum Feature Symbols to my drawing that i created in the model and they are coming in skewed when the referenced feature is not vertical or horizontal in the view and i can not do anything to fix them(see screenshot). the other Datum Feature Symbols come in just fine everywhere else.

Hi I would like to solve a differential equation for a set of variables. I hope I have clarified my problem in the attached file (prime 7), otherwise just let me know.   All help is very appreciated! Thank you 🙂

Hi, in CREO ADVANCED PLUS 9 I have to mirror THE 4c28fw08500.asm wrt the green SYM_TRASV plane.If I check the "Reuse selected model" I obtain the wrong position in the picture below:  Instead, I want to obtain the correct position that I have when I check the "Create a nex model", but I don't want to create a new code model. How can I fix this problem? Thank you.

Dear all,  i would know how to edit a sketch quote relation from the program file of a part.  I am creating relations on the fly, so to speak, and I cannot access them at a later time in order to modify them. I began by making the parameter, NTHICK, equal 1.5. For many extrusions I have entered NTHICK as the dimension value and Creo/Pro will ask me if I would like to establish a relation for the dimension. I click yes and a relation is created. I can verify this by double clicking the dimension and then I'm told that it cannot be modify becuase it is controled by the relation d256 = NTHICK; this is good, its what I want. The problem is that I cannot access the relation to change it. Going to Tools>Realtions doesn't work--the realtion is not there. Please help. As this was done in  many parts i would know if there is any update on this topic.  Older similar posthttps://community.ptc.com/t5/3D-Part-Assembly-Design/cannot-find-created-relations/td-p/4

I have 15 executable MathCad Prime 8 calculations that I’d like to run from a Windows Command batch file. How do I do this?

Community, Is it possible to apply an aerodynamic pressure load to a cylinder in Creo Simulate 10.0.  The load needs to be applied to one half of the cylinder and in the same direction, not normal to the surface.  Trying to achieve the pressure direction in the attached image that shows "Need this", except arrows pointing down from the top or outside of the curved surface.  Thanks in advanced. 

HiIs there a function in MathCad Prime (latest version or 9) where you can put a form field in formulas? I'll give an example:Variable = [form field] mm This is because I've noticed that when I make spreadsheets and make different calculation formulas, e.g.: k = x mm * y mmso often someone accidentally removes the units, and it then completely messes up all the calculations. So I'm looking for something similar to Excel, where each value is in its own cell. If there was a form field in the formula, other parts wouldn't be easily editable.

I need a license file update for MathCad 14 M020.

I'm here seeking some clarification on the main differences between using standalone vs subordinate when creating a user-defined feature (UDF). I am currently using Creo 7.0.2.0, and I think I've started to grasp the concept of it by performing some tests. From what I've gathered, standalone and subordinate are the same in the fact that both options allow you to modify the UDF by adding/removing/changing the variable dimensions and family table dimensions as well as changing the reference prompts using the UDF Menu Manager. Correct me if I'm wrong, but I believe that the key difference between the two is the ability to edit the actual feature the UDF is referencing. So, when creating a subordinate UDF, since it is directly related to the parent part, if you go back and change the features of the parent part, then the changes will be included in the UDF as well. For example, if you have a UDF of a revolved hole feature, you can go back to the base model and change the dimension of

Is it possible for Creo 9 to open Creo 11 files (*.prt, *assy, etc.)?  I'm part of a global team, and one region's engineering team uses Creo 9 while we use Creo 11. I sent them some files for review and they can't seem to open it.  Thank you!

PRO_JAVA_COMMAND variable keeps reverting to a different path.Throwing the following error when launching schematics"Java 11 or above is required for creo schematics to run. No supported version of Java was found." C:\Program Files\Amazon Corretto\jdk11.0.22_8\bin\javaw.exe - Path it reverts toC:\Program Files\Amazon Corretto\jdk11.0.23_9\bin\javaw.exe - Path that works when switched back Its only happening for one user. I have combed around and do not see the old version. Java updates are turned off. Seems to happen about once a week. Temp path is ok.

Hi, I'm trying to configure multiple versions of creo (Creo 8 and Creo 10) in a machine and i need to access vb api of each version based on the user action such as open. as per the instructions i had added pro_comm_msg.exe of Creo 10 to environment variables. my doubt is that how to setup the same for Creo 8? And will the COM classes and interfaces will be segregated for both the version and both can work parallelly?

Need MathCad 14 m020 license file for re-installation after computer crash and Win11 reinstallation.

I have developed a small software package to assist with the use of search_path commands when loading assembly files (without the use of Windchill). The software is completely free. It can be downloaded fromhttps://lihaul.dnsalias.net/owncloud/s/Gg42Ligo3Pqx5c9 Any comments, remarks to improve the software are welcome.

I'm working in CREO 10, but I'm very new to it after many years of Inventor and SolidWorks. I have a cable assembly that I made without using the cable tools. I have a PCB, roughly 10" length of ribbon cable doing a 180 turn (modelled as a U-shaped part), and a 2nd PCB. I have 2 locations where I use this harness, and the placement of PCB 1 relative to PCB 2 is about 1/2" different between the 2 location. I'm trying to make 2 versions of the same assembly (since we'll use the same PN for both locations), where the length of legs of the 'U' shaped cable change. On one instance, both legs should be the same length. On the other instance, the legs should be 1/2" different, but still 10" total path length. Based on googling, it looks like my options might be a Family Table at the Part and Assembly level to select the leg length. But maybe it makes more sense to do a Spine Bend (if I can figure it out) on a straight base part? Or some other approach?

Hello, I currently have a subscription for CREO (8-11) that will end at the end of the year.For financial reasons I will stop it.I have an old Creo3 license that is permanent. Will it work on Windows 11?When I will no longer have maintenance, will I be able to change my host ID?For this Creo3 that is no longer under maintenance.Thank you

Hi All, I am wondering if 3.0 F000 will run under windows 11?  Has anyone tried it? Thanks,Scott