CAD

Could you kindly assist me with importing an Excel sheet into Mathcad Prime? When I import, the quality of the documents is not good. I have tried to convert the page to an image, but the quality is very poor. How can I make it better?

当您保存装配体的备份时，您希望保存所有零件和工程图   Translated by the moderation using Google Translate -----------------------------------------------------------------------------------------------   When you save a backup of an assembly, you want to save all parts and drawings

Dear Sirs,I hope this message finds you well.I am currently encountering an issue while using CED 20.6. Specifically, when attempting to insert a section view while editing a drawing, I receive the following error message: "The selected view belongs to a read-only part or assembly," which prevents me from proceeding with further edits or operations on this view.I have attached a screenshot of the issue (please refer to the attachment) for your reference.I have attempted the following troubleshooting steps, but the problem persists:Verified whether the part is set to read-only mode.Restarted the software and reloaded the drawing.Tried loading different parts, but the issue remains the same.Could you please advise on how to resolve this issue? Is there a way to adjust the settings to remove the read-only status of the view?Thank you for your time and assistance. I look forward to your guidance on this matter.Best regards,Lan

Using Creo Parametric 10.0.4.0 I'm drawing a welding assembly and I've got welds that have arrows going through parts of the assembly.I would like to add jogs to the arrows so I can route them around the part instead. Is there any way to do this?And is there a way to move the weld symbol to another plane whilst keeping the arrows as they are. Right now, when I move the weld symbol to another plane, all the arrows move to that same plane and are no longer connected to the actual welds.Hope you can help me out! 🙂

How to enable 'Advanced Assembly Extension' by default whenever Creo is opened. We had Creo 7 previously where it was enabled always. After upgrading to Creo 9, we have to go options and enable the extension manually every time we open Creo. What setting we need to change to get it enabled permanently.

Hi CREO experts, I'm setting up new templates for my company and now I'm stuck with a font size problem probably refering to a din.dtl option. (CREO 9.0)We're using ISO Tolerance tables for shafts and holes and there is one problem with the display of the tolerances.I've set the tol_text_height_factor to 0.5. That works for all +/- tolerances, but not the limits. (see attached file)PlusMinus: Limits: As you can see the font size in the "Limit" display in the brackets is 1.0 but I want to have it 0.5 like in the "PlusMinus"Does anyone know the din.dtl or config.pro option to have the "Limits" display style the same as "Plus Minus"? Thanks in advance

  Hi,  I have a copy of Mathcad 13.1 that I had purchased several years ago. At that time Microsoft operating system was Windows XP. After I install it on Windows 10, it gives me an error message that it cannot start "engine 12.0". Is it possible to properly install and run MC13.1 on Windows 10?  

We have two parameters 'DRW_RELEASED_ON' & 'DRW_RELEASED_BY' in our drawing template. Source for these parameters is Windchill. Meaning, the values for these parameters will appear automatically when the drawing is released. All this worked fine in Creo 7 When we upgraded to Creo 9, I could not see these two parameters in the drawing template. Becuase of this, values for these parameters are not getting populated after the drawing is released. Can someone help? where exactly this issue is there?

We’ve taken a trip to the French Alps to learn all about the future of one of the newest forms of transport - a visionary, chainless vehicle with an advanced pedaling system creating a new world where they want everyone to be physically active.    

Creo Parametric 9.0.2.0The section view fails when the assembly components have been dragged.Do we also need to save a snapshot of the section view as well?

I'm using a custom menu created with J-Link to set the material in a part. The method pfcPart.Part.RetrieveMaterial works fine when the config option pro_material_dir is set to a local/network drive. However when this is set to a Windchill location using wtpub://[servername]/[material library] I get the error: com.ptc.wfc.Implementation.pfcExceptions$ToolkitNotFound. The material library location is correct (it points to the right location when manually setting the material) and the Windchill server is registered and authentication is done when starting up Creo. Do I need to make a connection to Windchill within my program before I can access items such as material files?

Looking to probatch a bunch of files from .prt and .asm to step and drawings as dxf. I am exporting from Wildfire 4.0 which just happens to be on the laptop I'm exporting from. I used to know how to do this. Does anyone have a quick guide to doing this? I don't want to spend more time figuring this out than it takes to do it manually. Thanks, WayneF

I was trying to get the trial addition and this page popped up.

Hello, I'm trying to build a Project, wherein i get the below compilation error: Not sure where exactly is going wrong. >protoolkit_NU.lib(srcstdstream.obj) : error LNK2019: unresolved external symbol __std_find_trivial_1 referenced in function "unsigned __int64 __cdecl std::_Find_elem<char,27>(char const (&)[27],char)" (??$_Find_elem@D$0BL@@std@@YA_KAEAY0BL@$$CBDD@Z) Settings Done on Visual Studio 2019:1. Added protoolkit_NU.lib in Linker->Input->AdditionalDependencies2. Added "$(CREO_INSTALL)/otk/otk_cpp/x86e_win64/obj;$(CREO_INSTALL)/protoolkit/x86e_win64/obj;" under Linker->General->AdditionalLibraryDirectories

Dear Sirs, I hope this message finds you well. I am reaching out regarding the Creo drawing inspection function shown in the attached image. This function automatically generates a dimension report and allows for the export of dimension data to an Excel file via the "Export to XLS" button. I am looking to automate this process using Creo TOOLKIT, specifically to automatically extract dimensions and generate the report. However, I am not very experienced with programming. I would greatly appreciate any guidance, tips, or code examples on how to achieve this. Thank you in advance for your assistance!   Best regards,Lan Haydena  

I have down loaded and installed Prime 10.0.1.0. However, It is not clear what was "improved." I would like to check out the improvements for myself.

Whenever I think I might be making progress, I hit something that causes me to scratch my head slightly.   This time, it's one of NaN's apparent idiosyncrasies.   SIUnitsOf returns NaN when applied to mixed unit matrices, which is somewhat limiting.   So, having spent a few happy moments programming Yet Another New Version of a function, this time SIUnitsOf, I was reasonably happy with its behaviour.    Then I thought I ought to keep my hand in writing Express-friendly functions and sort of succeeded.   I say "sort of" because I noticed an anomaly: vectorizing SIUnitsOf over a mixed-unit matrix with a pure NaN threw in a spare unit where none was supposed to be.     I've played around with various positions of NaN within the matrix, and it looks as though SIUnitsOf returns the unit of the first element to the NaN under vectorization.   The first question is clearly, "Is this 'anomaly' to be expected?", in which case, what am I not understa

I'm not sure how long this has been like this, but when I hit the print button nothing at all happens - no dialog, no error, nothing.  I restarted the PC and still nothing.  ARunning MathCAD 9.0.0.0 on Windows 11 Pro.Any ideas?

Is there a way to reorder the sequence of locations within a network? Pushing them up or down in the primary defined sequence you might need to reconsider in the course of your design?Additionally, I would like to know if it's possible to remove a location within a routed wire/cable without it being deleted in the network itself.

Hello, im at creo parametric 7.0.9.0 and it never saves what config i am using or what directory i am working. Like always. Here is how i confi'ed' the creoin this folder especific its my config, but i tried other folders, it always open in the below foldersworking_directoryconfigshould I  write something on my config, so it becames permantly. Ive already tried chanching the file_open_default_folder with defaault, working dir, in secion but nothing workings. I did already look to some solutions on here, like chanching trought the envirment but didnt work as well.

I recently discovered an interesting trick in Creo Simulate. Normally, it is not possible to place constraints on the weighted links. When starting a static analysis, a fatal error occurs. Therefore, instead of constraints, e.g. springs to ground are required. However, if the static analysis is integrated in a fatigue analysis, Creo forgets the pre-check and calculates without problems 🤣

I have run into similar problem again where I am not able to evaluate the value stating it cannot assign value greater than 10^307 what is missing in here? 

Would someone please help me with setting the document tol so that very small values in the matrix show as zero? Thanks

My computer crashed while using mathcad (unrelated crash to Mathcad). After restarting, Mathcad won't open beyond the splash screen. I have uninstalled and reinstalled the program, and keep getting the same results. Splash screen opens, closes, and then nothing else happens.

Hello, I am using Creo Parametric 9.0.8.0 with Windows 10. I have an odd case where it appears that Creo is measuring the volume of a part wrong. The volume output from the mass properties dialog box is showing a value of about 0.306 in^3 as shown in one of the screen shots. However, this way underestimates the volume of the part. Just the main portion in the middle can be hand calculated to about 0.7 in^3. I don't know what is wrong here. I have tried regenerating the part and swapping to fully assigned properties and then back to geometry defined, but the number does not change. Any insight is appreciated. Thanks,