CAD

Hi, I tried to export my part as step  with different default cys But in my result step file the default cys z and Y axis are interchanged. Check image for details. Help me with a solution. ThanksRam RDesigner

Dears, I noticed an unusual behavior when copying and pasting after editing the new Prime 10 advanced control box. Whenever I try to copy and paste, the box size becomes infinitely long in length.Prime 10 file attached. Thanks for any help, Fred  

Is there a way to install Prime 4.0 on a new computer?

I am using PTC Creo 7.0 and want to analyse the behaviour of pressure in a braking system. I was thinking to use a simplified model consisting of a length of brake line (4.8mm bore) connected to a piston inside a cylinder. (35mm diameter with 0.5mm stroke)I would then introduce restrictions in the brake line and analyse the effect on pressure build up behind the piston. Does anyone have experience with a model similar to this? As a starting point, I have created a transient flow analysis of a simple brake line with a restriction, but without the piston element: the brake line is set with 8000000Pa inlet pressure and 0Pa outlet pressure but this is not yielding the expected results (i.e. a ramp up in pressure from zero, finishing with the outlet pressure equaling the  inlet pressure). This is the result I obtain currently:Looks o.k. so far, however if I simulate a number of different restriction diameters, I get this: I would expect final outlet pressure to

Hello, is it possible to remove the variied elements in TOOLKIT? The function ProVariantfeatItemStandardize() doesn't work for Dimensions. I could only remove features. I work with Creo 10.0.4.0 Thanks!

Hi All, Is there a way to measure the coordinates between one asm to another in creo view?

HelloI am trying to model a simple CFD with heat transfer.The model contains a solid body with internal flow channel and two holes for inlet and outlet.The flow channel was created in solid part by revolving a sketch and removing material, then I added holes on surface to interface with that channel.When I create fluid domain, I select the surface containing the inlet and outlet holes. The created fluid body looks fine. However, when I try to define boundary conditions for inlet and outlet, I am unable to select each surface individually. Both inlet and outlet get highlighted together as I try to select either one to define flow.  Has anyone encountered similar problem? thanks for your advise in advance.Also another question is what is 'caps' option and what is seed surface when creating fluid domain, Do I need to define a seed surface?thanks

Greeting, I don't write bom relations very often. How do I write a simple one for a parameter I have called "material". This is what I put and it does not work. Do I have to change in repeat region? IF asm_mbr_part_number=="MS51957-26"asm_mbr_material="CRES, PASS"ENDIF Wayne

I am working in Creo 10 and having trouble editing line style widths on quilted components and imported features in assemblies. As it is, when I print my drawings, these features come out much too bold. I was hoping this could be corrected in my drawing options, but I have not found anything that helped. Someone suggested I try to use the Data Doctor tool but the many unfamiliar options in it forced me to step back until I can better understand. I am open to any suggestions that might help.

Hello, I am trying to read a ptb file into pattern table using toolkit. I only find one way to do so is to read the ptb file and then build the element tree and assign the values into the element tree.  Is there any other way it can be done or any sample code to refer how to build element tree of pattern table. Thank You

I am using Expert Moldbase Extension Release 9.0 and DatecodeF000How to migrate EMX 9 data to EMX 16

Olympic Rings. Has anybody tried to model the olympic rings, i.e. 5 proper interlocking toroids as shown in the attached file, and not the faked versions you can see from the games in Paris. I find it quite a challenging item and wonder if it is solved already.  

I’m currently working on a Mathcad worksheet that wasn’t originally designed by me. I need to convert this file to Mathcad Prime, but I’ve encountered some issues after the conversion. These problems are affecting the functionality  of the worksheet, and I’m not entirely sure how to resolve them. Has anyone else faced similar challenges? If you have any tips, advice, or solutions, I’d greatly appreciate your help. 

Hello Community!Can you help me? Which extensions does Elements/Direct Modeling Express read?

Hello, I would like to insert a view into a drawing, and that works so far. The view should have the same orientation as in the 3D model, e.g. front, top, bottom, etc. How can I pass the predefined 3D view name when creating the view, or assign it later? Does anyone have any ideas? I'm using Excel VBA.   Translated by the moderation using Google Translate ----------------------------------------------------------------------------------------------- Neue Ansicht in Zeichnung einfügen, mit Ansichtnamen aus 3D-Modell   Guten Tag, ich möchte in einer Zeichnung eine Ansicht einfügen, das funktioniert auch soweit. Die Ansicht sollte aber die Orientierung so wie im 3D-Modell haben, z.B. vorne, oben, unten usw. Wie kann ich beim Erzeugen der Ansicht den vordefinierte 3D Ansichtnamen übergeben, oder nachträglich zuweisen ? Hat bitte jemand eine Idee ? Ich bin mit Excel VBA unterwegs.

Been a few release since I used Creo last.   I don't remember having to hold control when picking entities for dimensions. You could, but it wasn't mandatory.   Am I mistaken?

I am trying to create an app using Object Toolkit C++ and run it using spawn mode (exe). I have tried with DLL and it works, but when I compile to exe and change the creotk.dat file to startup spawn it does not work anymore. After having registered the app in auxiliary applications, pressing start causes Creo to freeze and then crash. My additional dependencies in the Visual studio solution is : otk_cpp_md.libotk_222_md.libprotkmd_NU.libMy creotk.dat is as follows:  name ObjectTest startup spawn #toolkit object #creo_type direct exec_file C:\Users\SENY5612\source\repos\ObjectToolkitTest\x64\Debug\FindNumberAnnotate.exe text_dir .\text allow_stop true delay_start false end   My source code is as following (for now it is more or less empty as you can see):  #include <wfcSession.h> #include <pfcGlobal.h> #include <pfcCommand.h> #include <pfcUI.h> #include <pfcExceptions.h> #include <wfcClient.h> #include <

What i mean is is it possible to use map key or tool kit or create a batch file so that whenever i open a sheet metal part and run a command it gives me perimeter of the part. which is basically cut length which will be used to calculate tonnage. Thanks!

How to fix when surface despaired from 3D Creo 9.0 Model after performing Solidify Remove Material? The surface is not hidden in the layers. I clenched that. CAn somebody hgel with that issue?    

Hello everyone,  I am very new to this software and am going through as much online training as I can. I had a trail version a few weeks ago and I was able to add simple equations to the dimensions as I added them to the drawing for example: 3 1/2 * 2 which should set the part to 7”  Since I’ve installed the new software it says this. hope you can help I can’t find an answer anywhere,  I want the dimensions to show as 7” or 3 1/2 is this possible?  

Hello, I’m a student new to this software. I’m trying to solve D1, D2, D3, and D4 in terms of variables but need some help.Thank you!

Folks 1st question: Can i bend this seam into a flange using the spinal bend or similar feature? I tried using the sheetmetal flange, but it will only bend it by sections, maybe because is not a continuous feature but modeled in several flanges.  I want to bend the whole seam 1/2" long, this way:  2nd question: Can I bend a symmetrical flange created in sheetmetal into a non-symmetrical flange? Side view of the non-symmetrical flange (for illustration purposes)The front view looks like thisfront view  thanks

Hello,   I am trying to build element tree of pattern table in creo toolkit C++ . I have dimensions stored in a vector. I am facing issue in assigning the first instance.  Is there any sample code to refer for building element tree of pattern table?   What is correct method to set the values in first instance?

Creo Flow Analysis How to calculate the drag coefficient，What are the steps！thanks。

Dears, I have little experience with PTC software, especially with CREO FLOW ANALYSIS. Would it be possible to clarify a question I have?I need to carry out an analysis of a fertilizer distributor using DEM technology, similar to the one demonstrated in the video available at the following link: https://www.youtube.com/watch?v=dj_51S7k_sM. Is it possible to carry out this analysis using the "CREO FLOW ANALYSIS" tools?Thank you in advance for your attention. Sincerely,Tales Eduardo Zorzenon