CAD

Hello @Werner_E and crew,I've recently returned from a hiatus from the forum due to a busy schedule.I'm back with a new project and seek your guidance.I'm presenting the following scenario: I'm dealing with three rectangles or zones: A, B, and C. Each zone has a priority level. I have a list of points that I need to plot and require the program to determine the zone in which each falls. Should a point land on the boundary shared by two or three rectangles, the program should assign it to the zone with the highest priority. I've been working with Mathcad Prime 9 and have devised a solution, but I feel it's lacking because I haven't effectively incorporated the priority level. Could you recommend a more refined approach? Below are snapshots for easier reference. In the real world scenario, there will be many more zones and huge list of points.  

I am trying to update a drawing (Creo 9.0.4.0) and I cannot get @O to work. Did they remove this from the program?   Trying to reattach.    

We just upgraded to Creo 10.0.2.0Here is a new problem I have which I  can duplicate by any action involving trying to drag a Creo window or even a dialogue window within the main Creo window such as a "Measure Summary" box.In this example, I made a measurement on the part. The "Measure Summary" box appears covering up the smaller measurement box, so naturally I want to drag "Measure Summary" to the side to reveal the smaller measurement box which it is blocking.The moment I click and hold on the Measure Summary Box to move it out of the way, the Creo Window jumps half off the screen.  I let go of the mouse button and it returns to normal.  (Video Attached)How do I fix this behavior when I go to drag a window?Thank you,Glenn(view in My Videos)

 Check-in comments in Creo Parametric through Toolkit.

I need help.  I have several files I need to export as either .stl or .3mf for printing.  Just for reference, I am trying to use Creatbot Creatware software for slicing for a D600 Pro.  I cannot get the slicing function to work in Creo either, this is another problem. I've checked every setting I can find which was suggested to check/change.  My cord dimension is defaulted to Zero.  I get several Error messages. When trying to save as stl, this shows...Unable to triangulate part. I've run the geometry check, there are a couple of caution messages..."Non manifold geometry may have been createdAnalyze hilited edges and redefine the feature".   I have no idea what this means, nor how to fix it. Another issue I'm having is with the slicer.  I have some models which I did export as .stl, but did have a problem in slicer, other files I cannot export as .stl and have the same messages in slicer as those that I did export.It doesn't m

I am using Creo Parametric Release 7.0 and Datecode7.0.10.0In sketcher we Can't edit the dimension. For example after selecting the dimension it is automatically un-selecting itself. The same issue is happening at 3 of our PC's. Requesting to make a swift action to resolve the issue asap.

I am studding pipe design from a "sample_project",There is a configuration file named "piping_mcat_dir.csv", point the location of the fitting 3D model folder.These locations are in local,I want change These locations to Windchill server folders.Do you know how to modify it?   

I am trying to make a tire and cannot find what is wrong with my sketch. Also, it does not suggest anything. I have used the revolve tool before but I am very inexperienced with the program. I am also doing this without any sketch, so measures could be wrong.

Once I open a Solidworks part and make changes, when I save it there is a .creo extension added. How do I cut this off? I do not see it in data exchange.

I have been trying to install Creo 7.0 for a while, but keep getting a loading icon that disappears after a few seconds.I have tried running as administrator, disabling firewalls and antiviruses, and deleting all previous licenses and things off my computer (all at the same time). Does anyone have any insight?

 I am looking for the command line utility or any other command line functionality to be used for converting the Creo family table generic part or instance to be converted to step file.  I am not looking for the UI method as I am aware how to convert to Step using the Creo_viewer or adaptor. Is there any way we can run the Creo viewer in backend using command line ? I am searching on this topic since few days but no more info available. I really appreciate the expert guidance or opinion on this. I am using Creo parametric 7.0  or 9.0 and  10.   let me know if we have any feasible solution 🙂  Thanks.

I am using Mathcad Release 15.0 and DatecodeM050Need to plot circular segment for four different cases. Need help setting up. see page 19Sheet one dose it individually, Sheet two wit T on name is my attempt to do this. See page 19.Here are the errors that I facedSee sheetDon't know how to upload my sheets.

Hi. I'm using Creo 7.0.10 and I cannot find a way to change the line properties of a projected cosmetic sketch. I can change the properties of the lines within the cosmetic sketch feature itself (color and line type) but when I project the feature onto the surface, the projected lines are created with the default color and type. (orange, solid).  See snapshot. I am trying to create a simple sewing pattern onto overlapped fabric, hence the dashed lines.  I can do this with projected datum curves, but our (enormous) company Windchill is set up to always hide all layers for official Check In.   Our system will also not allow us to create additional layers so I have that potential alternative working against me as well and there is 0 chance of changing that. Cosmetic Sketch gets me around my curve/layer limitations, but now I am faced with this new dilemma. Is there a way to change the projected feature properties or is this just how Creo works?

Hi,I have currently CREO 9.0.0.0 Student Edition installed. When I start the application, a popup message tells me that a new version 9.x.x.x is available. But when I click on the update link, an other message tells me that I cannot update as I don't have a customer number. Does it mean that the Student Edition cannot be updated ?

Is it possible to give show model annotations and enable all dimensions with snip line  through toolkit

A cylindrical cake (torte) has a chocolate icing. A knife is used to gradually cut out pieces of cake with the angle alpha and then flipped over and reinserted into the cake so that the icing is on the bottom. We keep doing that - after one circuit, the cuts can end up in pieces that have already been cut. Of course, the glaze moves back up, ...If e.g. alpha = Pi/2 (90°), then after two turns the glaze is completely on top again.Question: For which angle alpha is the glaze completely up again after a finite number of steps? Friendly puzzle greetings!

Hi All, Is it possible to save the display state (hidden elements) without having to use "Save Status"? Thanks

Any Creo 10.0.x.0 release behaves as said in Subject. I will upload test data created in Creo 7.0.11.0 and video showing the "problem". Note: I already opened Case at PTC Support.

When I need to pass the parameter description from Drawing to PTC_COMMON_NAME of Windchill 12.1.2.0 thre are two ways depend if thre is a part or assembly in the model of drawing:  PTC_COMMON_NAME:D= PTC_COMMON_NAME:0 for Part and  PTC_COMMON_NAME:D= PTC_COMMON_NAME:1 for Assembly. There are any condition for to know if is a part or assembly in the program after upload to Windchill? Thanks. P.D. I work in Creo 9.0.3.

How to insert screws by positioning the screw on a cylindrical surface? I'm using Creo+ and I didn't find any configuration that enables the selection of cylindrical surfaces for positioning the screw head and washer. The red surface shows the location for inserting the screw head. This is the expected end result: Is there any automatic way for this positioning?

Hi I can't Downloading Models for the Tutorial the 3D model for training. Does anyone could send me this model?When I click on the link, it sends me to another page where I can`t find the download button.

Is it possible to mark the same holes in creo parametric 2.0 by painting 1/4 of the hole? just like in the attached picture

can anyone please help me with following: Worked well in Mathcad 15, Prime 9 doesn't like it... Best regards   

Before I open up an idea on this does anyone know of a way to shell a part but replace the shell with a lattice? Or convert the remove shelled volume to a body so I can use that for a lattice?

Hello Team,i have a problem with my mathcad license.I got a new laptop and my license is activated on my old laptop. Is there any chance to activate the license on my new laptop and deactivate the other host?Thanks for responding!Greedings,Lorenz Schinagl