CAD

I am using Creo Parametric Release 8.0 and Datecode8.0.5.0Hello,I will write Gpost for Siemens 840 D control units, but I didn't get the gpost output as belowCS_TOOL("T60")CS_TP("T11")When I got the gpost output, I got it as belowT2 M6T1How can I change Tool output as CS_TOOL and CS_TP in the GpostCS_TOOL= Tool to useCS_TP=a next tool

I had the following request in today from a customer. How do I delete the references used in an NC step, Using the references right mouse click doesn't allow the option. Customer on Creo 4 F000, I have also tested on 10.0.2.0.Only way seems to be to edit the Tool Motion entries.

Currently running 9.0.5.0 on two work stations and the issue as stated in the following post was not resolved:   https://community.ptc.com/t5/3D-Part-Assembly-Design/Cursor-not-visible-in-family-table-cell/m-p/875073/thread-id/129131#M129649   Going to either open a new case or see if the previous one can be reopened.   (Previous case: 16880414)

a) Does anyone have experience with the stability and performance of Creo Parametric on an Intel Core-i9-13900 or 14900 CPU? b) what motherboard and chipset is advised?c) There is also a chipset which supports ECC RAM memory.  Is it needed for a good stability of Creo ?d) Is ECC RAM needed for a good stability of Creo Simulation Live ?e) How is the sound level? Is it silent or a lot of noise when high performanceis asked?f) How is the experience with over clocking the CPU to about 5.8 GHz regarding above questions? g) Comparing the specification with Xeon processors the Core i9-13900 may perform better.- Is this also the case in practice?- Is this also the case when not using the over clocking?h) Is Creo always using the Performance Cores of these CPU and how is this managed?i) How reliable is the Core i9 and what about lifetime when over clocking with respect to a Xeon processor?j) Is over clocking possible or can this performance increase not be earned and is it downsc

Attached to this blog post is a short presentation on the new enhancements to Dimensions in Creo 4.0 in Drawing mode. Any questions or feedback you have related to Dimensions should be provided as comments to the blog post. That will be the easiest way for me to keep track of the comments and also be able to provide timely responses to your questions. If you follow this post, you can be notified of those comments as well and be able to learn from what others are asking. I may also periodically update this post to add some new details or information related to Dimensions.   Also, don't forget to follow the main blog post for 2D Detailing - which will have links to other 2D Detailing-related content 2D Detailing Home: Start Here!

Check out this video on Creo Composites from PTC Application EngineersPresenters: Lee Goodwin (Technical Specialist, Principal) and Ryan Butcher (Technical Specialist, Fellow)Original Date Presented: August 15,, 2023To dive deeper into the subject, check out Creo Composites Learning.  

The middle mouse button does not complete the feature (example line chain).  I was on Creo Parametric 9.0 and just downloaded 10.0 both the student edition.  It was happening on the tail end of 9.0 and continued in 10.0      

This is sort of a follow-up question to this thread where I was recreating the calculations of the ptc sample:          https://community.ptc.com/t5/Mathcad/Simple-beam-analysis-moment-equation/m-p/920727#M209874          https://community.ptc.com/t5/Mathcad/Building-Structural-Design-Single-Span-Beams-Shear-and-Moment/td-p/450598  Once I got that working, I defined two functions that process the spread-sheet wide variables, which was working "properly" for me:     a = [matrix]     w = [matrix]     p = [matrix]     ML = number     MR = numberWhen I tried to move all arguments into the function definitions and I am getting error: "This value must be an integer."     M(x,a,w,p,ML,MR) and V(x,a,w,p,ML,MR) I'm having trouble figuring out what is causing this. Can anyone point out what I am missing?Thanks!

We are trying to convert Mathcad 15 files to Mathcad Prime 9.0. When we complete the conversion we have lost some functionality with the files, such as with control objects (radio button, check boxes, drop down menu). This portion of the files are removed during the conversion. Is there a way to convert these functions or can we purchase Mathcad 15?

Hi, I have the error 'This operation can only be performed on an array' as on the sheet attached (simplified version of calc sheet). What is the work around? The last part with the error would be part of a larger function, but acts in the same way. Kind regards,Dan

I’ve been used to work with Mathcad prime 4 and 5. In those versions I could define a variable based on the output from the solve function simply by “:=” between the variable and the equation. That way I could use the output in subsequent calculations. I now have Mathcad prime 8 and this doesn’t work anymore. I can see there has been a change to “The new symbolic engine” in the versions in between. My question is how to define a variable based on the output from the solve function with the new symbolic engine? I’ve added screen shots of an example of the output in Mathcad prime 5 and 8.  Best Frederik

Chapter 1: Analysis of Beams, Part 3        Description:          This application computes the reactions and the maximum bending moment, and plots the shear and bending moment for a single span beam, with or without end moments, loaded with any practical number of uniformly distributed and concentrated loads. The user must divide the beam into segments with each segment supporting a single uniformly distributed load over its length and/or a concentrated load at the right end of each segment.  Next: Chapter 2, Part 1Previous: Chapter 1, Part 2       

Good afternoonI am using Creo Parametric Release 8.0 and Datecode8.0.7.0I' m using CreoJs in order to automate some tasks in Creo.From CreoJs, I'm trying to make a call to Windchill REST services.It works well for a GET request by using "downloadJSON" function from Additional API Features Introduced in Creo.JS in CreoJs user guide.My issue is when I want to do a POST request.I use "uploadJSON" function to be able to send a JSON object with body definition and the nonce token in the header.It always return an Invalid Nonce token error.Is someone could help me on the correct use of the uploadJSON function to send a POST request with headers?Or what are built-in function of CreoJs to perform a POST request?Here are the errors that I faced"statusMessage":"400: {\"error\":{\"code\":\"INVALID_NONCE\",\"message\":\"A potential security problem was detected. Refresh the page and try again. If the problem persists, contact your administrator.\"}}"

As per the original post.    Hey,   Is the play trail file option not available for student version ? 

creo 4.0 m100toolkit  visual studio 2015 not working

Hi, I am new to Creo. I have tried to use the Spline tool and I can't add another point OR delete an existing point upon creating a spline. I am usually forced to delete the spline and recreate it in case I want extra points or fewer points. Is there a way I can edit the spline i.e. adding another point or deleting an existing point? 

Hi everyone. Is there any option in CREO Parametric,  to 3d-draw flexible components such as hoses and cables after their natural properties such as weight stiffness tension rotation etc.? I want to draw some water hoses in a machine, so that the hoses can behave after their real structural propertires, not only forces by my restrictions. Thank you so much in advance for your help. Br,Hasan   

I am using Creo Parametric Release 4.0 and DatecodeM040User is not able to fetch NRB templates.Here are the errors that I facedUser is not able to fetch NRB templates.

I would like to make a suggestion for Mathcad Prime 10!  Not sure if it would work but I would like it to perform the following. When typing in an equation I would like to be able to just click on a previous variable definition and have it automatically copied into the placeholder of the equation I am typing.  Often I use long variable names, retyping them is prone to error and takes too long.  My normal course of action is to go out of the equation, highlight the variable name from a previous section, go back to the equation and then paste into the placeholder.  This is better than retyping but very clunky, if I could just point and click...ahhh, MathCad nirvana!! Thanks PS perhaps someone knows a better way already?    

how to enable this option in creo9.0  

I am new to combination states. When I create a new combination state, all of my default datum planes get hidden and I can not unhide them using layers or the model tree. But I need them because I want to move dimensions to those planes. Does somebody maybe know how to bring back the default datum planes when you just created a combination state? Thank you for looking into my question!

Hi everyone,What are your favorite features, shortcut, or lesser-known capabilities in Creo that has significantly improved your workflow? I wanna know. 🙂

I have a MathCAD Prime 7.0 worksheet and I created three custom functions, which are very similar. The each seem to process variables somewhat correctly, but only one of the three will process a matrix/range variable even though I've tried using the same arguments for all three. Any idea why the two later functions are treating the matrix/range variable as a constant? Thanks! 

Hi Dears,My name is Mehran, I have been working with this software for fifteen years, how can I create a surface with class A on several edges (five edges or more)?I have created a style, but the surface is very wavy. What command or method can I use to remove the waves? Thanks

I am using Creo Parametric Release 8.0 and Datecode8.0.5.0Unable to replace UDFHere are the errors that I facedReference features in reference assembly are missing.UDF can be placed with current references.