CAD

Is there a way to maintain hyperlinks in the pdf versions of Mathcad documents?  

I am using Creo Parametric Release 9.0 and Datecode9.0.2.0When I create an assembly parameter table on a drawing file, such as BOM, there is no & displayed before the parameters, and the table does not respond after importing the assembly. Assembly parameters only take effect when I create an assembly parameter table on the format file and create a drawing file using that format template. I would like to know how to directly create assembly parameters on the drawing file. Thank you.

Hello,           We see that in the case of the function Test1 Arg(Test1) cuts -180deg line, as a result, we can have values ​​for:   But in the case of the function Test2 Arg(Test2) does not cut -180deg line, and this means that: or or   But I get the red color:   The idea is that I don't want to see this red color (although I know from where this no answer/red color comes -> because the graph does not cut -180deg line), but instead, I want to receive as answer one of the 3 options listed above. Is this possible?   Mathcad Prime 8 file attached.   Thank you.  

Why we have 3 functions lspline, pspline and cspline? Can we have only one spline?        

Hello,I have the following problem. If I e.g. Define 2 variables (b:=5 & h:=2) and then assign them to a new variable (W:= b*h) and then press =, then the following is displayed: W:= b*h=10However, I would also like to see the formula written out and then the result: W:=b*h=5*2=10 When I do that with symbolic evaluation and keywords, it doesn't look pretty.So is there a way to have formulas written out like above before I see the result?This way you can understand the calculation better. Thanks very much.   Translated by Andra Chirila using Google Translate on April 21st, 2021----------------------------------------------------------------------------------------------- Hallo,ich habe folgendes Problem. Wenn ich zb. 2 Variablen definiere (b:=5 & h:=2) und dann diese einer neuen variablen zuordne (W:= b*h) und dann = drücke, dann steht folgendes da: W:= b*h=10Ich würde jedoch gerne zudem die ausgeschriebene Formel sehen und danach das Ergebnis: W:=b*h=5*2=10Wenn ich das mit

I am using Creo Schematics Release 7.0 and Datecode7.0.0.0One of our customer ILENSYS TECHNOLOGIES PVT.LTD (#606613) is having Creo Schematics recently purchased ,they are having Creo Software Version 9-0-2-0, when i am going to rev up the version 7.0 to latest version ,it showing the popup error like (error if you want perform this action, please Log a Case),

Hi all, i have been trying to create a domed surface from this flat surface. I need to maintain the outside shape & draw the surface up towards the centre about 5mm up ideally with a single arc. The outside profile cannot lift off the datum on which it sits. The flat surface does not have to be used, i just figured there might be some way of pulling/dragging or distorting it using warp or free form surface manipulation but i have not managed to, thus far. I have tried boundary blend too but cannot achieve the flawless surface i require. Any ideas? John 

Trying to plot a simple X Y plot for function below.  I get an error using units but none once units are removed.  I'm missing something basic. Help appreciated.  

do you know how i can reduce the Stress here with CROE (due the singularity) ?    

Does anyone know what the internal processing limitations of MCP are w/ regards to the max processing speed and the number of cores, etc.? Same question for multithreading turned on and off. My company recently purchased a 16-core, 3.2GHz/5.0GHz 'power computer' and I would like to know how much MCP can take advantage of this machine.Thank you! 

In Creo Illustrate 9.1, is there a way to save the sBOM coordinate and rotation states that I have at the end of a sequence step? It can be something I have to set-up before I create the step. I'm just hoping for this functionality, so that I have some kind of workaround for an issue I'm having - I've already submitted a ticket for the issue.

Hello everyone!I can't determine the origin of the 180-degree offset, between the two results, one in the first worksheet and the other in the second one. As for the creation of the graphs, with the interval chosen, it takes a long time (many minutes). A tip to speed up the drawing? (see photo).I enclose two worksheets dedicated to the same problem but with different methods.Thanks to whoever will answer me.

Hi allHas anyone encountered this before? In my Combobox, dimensionless inputs get units. You see the problem below. I'm thankful for any advise how to get rid of the problem 🙂       

I am developing a project in JAVA OTK PTC Creo. I want to add data reading from Excel to the application. For this I am using POI 5.2.3 (xmlBean 5.1.1). Debug showed that the problem is in some resource, but this resource is in xmlBean, I have shuffled this resource everywhere, but no effect. For 36 hours I've been looking for a way out and I can't find it.SRCLocale.setDefault(new Locale("en", "US")); XSSFWorkbook workBook = new XSSFWorkbook(inp); <-- there isErrorjava.util.MissingResourceException: Can't find bundle for base name org.apache.xmlbeans.impl.regex.message, locale en_US     

Hello,       ????   How can I extend the above x(t,...) signal which is defined from -pi to pi to a periodic one so that I can display more periods of the signal, as it is shown below?     Mathcad Prime 8 file attached.   Thank you.    

Issue: Mathcad Prime fails to launch after the recent Windows / .NET updates on Windows 7 x64bit Mathcad Prime does not launch after the initial splash on Windows OS Mathcad Prime isn't starting after update from KB4055002 for Microsoft .NET   Cause:Bug with Windows security update KB4055002 for Microsoft.Net Framework 4.7.1   Resolution: Microsoft acknowledged the bug with Windows Update KB4055002 and released an update to fix this issue. Users can download and install the fix from the Microsoft catalog here

I was learning to use MathCAD with a trial version. I had a Excel sheet in my Mathcad file with some calculations. Since my trial license has expired, now I am unable to open the excel sheet. Could you please extend my trail version to recover my excel sheet or is there other ways to extract this excel?

We regularly use image files on Creo drawings, we import them from the downloads folder. When we check in the file in Windchill, it loses the image because it is on the client machine. Is there a way to import a image file into a workspace so it will check in with the drawing?       

I have a Sheetmetal part which I created using revolve option. I use unbend option to make a flat representation of the profile add 2 bends at either ends of the part and also couple of holes. Then I use bend back option to retrieve the original bend profile. Unfortunately, the profile created by the bend back option is not the same as the initial profile. This is shown in the attached pic-black line is the bend back profile and green line is the original profile.1) Why does this happen?2) Can I get back to the original bend profile?3) Is there another option to create this bend profile and add the necessary bend and hole features?NOTE: I use Creo 8.0.4.0 

Hi, I'm having an issue where the vectors in the image below con't calculate into a result. The second image is the one where the results should be. I'm using Mathcad 20, so it's pretty old, and the original author of the workbook isn't around anymore. I can't see anything glaring and there was definitely a result from the workbook at some point. If anyyone can help it'd be greatly appreciated! Thanks, Tom        

Curious what types of technologies people might be using to manage and distribute their Creo Parametric configuration?    BAT scripts, PowerShell scripts, etc. HTTP/HTTPS connection Cloud file system CFS with content delivery network or replication Other? The company I work at is employing more external suppliers who will need to run the company's configuration of Creo Parametric on their machine. Until now, we kept everything on the local network using mapped drives. The model does not work if we need to support external partners, not on our network and globally dispersed.    We are looking for a more automated and globally accessible way to update the content and have users connect to it   To get started, we are currently evaluating AWS S3 and FSx with plans to try multi-region and CDN   Love to hear about any success stories people already have with this problem

Hello,       Do I need to define the dirac delta (unit impulse) function separately to be able to use (plot) it?   Mathcad Prime 8 file attached.    

please I don't know how to overcome this error   

Can't access MathCAD with my school account for some reason. It works for other students

Hello,   Input: where  is the step function:         Rewriting the above result:   And calculating fourier transform by definition for the above input, results:  (which is the correct answer)     So, where is the mistake? The 2 above results should not have been equal?   Mathcad Prime 8 file attached.