CAD

Hi, I'm facing an issue while converting the unit in Mathcad. Here I attached the issue. This was the resulting value of the corresponding equation. But I need the value in N/mm^2.If I change the unit, it does not result properly. The resultant value should be in N/mm^2. Can anyone suggest the better way to solve this issue?     

Hi guys I have a question about intersection of surfaces/curves ...  Until now I havent found any complex curve which I cant do with only curve intersection. But I found lot of videos with surface intersection. What are advantages and disadvantages of those mentioned methods, thanks.    

I am using Creo Parametric Release 8.0 and Datecode8.0.6.0Hello, and good morning.I have sent a same topic.. But it looks lost. I send you again.when I make the BOM baloon. I want to change the default value rpt.index to the other one in table properties.anyway I want to show you the picture.

I am new to mathcad, could someone explain to me why I get this answer?  My calculator tells me it should be cos^-1(0.625) = 51.32 Any explanation or advice would be greatly appreciated.thanks,James 

Hello, I have a perpetual license for Prime 2.0 but do not have the installation file. I see that it is no longer available for download but I need to install the software on a new hard drive. I do have the license file, I just need the software.I can't find any way to email support directly with this request, can anyone help?Thanks in advance.

Has someone discovered a way to put a list of tools and their dimensions used in an operation(s) at the head of a post?  This way, the operator could check by reading the G-Code to make sure he/she has the machine set-up properly. 

Hello, I would like to solve a system of equations, but I receive the error "The symbolic result is too large to display". I need the symbolic result, because I would like to calculate the parameters of the electric circuit for which I wrote this system of equations. I'd appreciate it if you could help me with this issue. I have attached the relevant file. Thank you.Marius  

When publishing in Illustrate, the list of items was printed in pdf using the xml template.I want to know how to modify the design of the item list table shown below. I would appreciate it if you could tell me how to correct the background color and align the letters in the middle.       

 

For those who prefer the Unix user interfaces (PELOOK 0 ou 1), a menu has been added. To be downloaded from http://kotom.eng.free.fr/                           

It seems that this configuration is not an option in 8.0.6.0 (?) Do you know, or anyone else here, if there is a way to show driving dimensions which "origin" extension lines get clipped by x-sections?   RE: post

I would like to solve a non-linear equation for the maximum value.  The equation has 2 dependent variables and the solution represents the maximum value for a given number of independent variables. (see equations below). The dependent variables are initialized at the start of the solution and the largest values of Ka and Kp are calculated for the independent variables. I will try the solve block solution with 2 guess variables and see how the results compare to the published solutions.  I would appreciate comments/suggestions if there are other methods of solving the equations.    

Hello Everybody,I'm working for several clients (Creo2, 3, 7 8 and 9).I'm installing Pro/E - Creo for many years in C;\ptc\creo_xxxNo problem for using all versions.I'm doing this for over 20 years... too late for me to change my manner... 😞However, I would like to install each revisions of help files..Downloaded on PTC.But I can't what would be best place to install each help folders.(Program files ??? but each revision will erase previous one ?)Any idea ?Thanks

Hi,I would like to know what is the shortest way to generate sheet metal dxf flat pattern. Now, i'm using drawing part with empty template and set 1:1 scale. Is it possible to make dxf flat pattern clicking on 3d model? I use this method on the other soft ( SW, UX).Thanks,Adam

Hello expertsHow to create center axis for dia 25 in Drawing using CREO 8, Please some one assist me 

How to create user specific custom commands in Creo View 9.0. Its showing as creation of xml files, doing so,can anyone elaborate this process? thank you so much

My Mathcad 14 files became distort after I got the bigger monitor. Text regions shifted from math regions. Why that happen?Thanks, BR  

Hello everyone!I have been looking into the transient in this passive circuit for some time. However, I see that the theoretical results do not coincide with those using the TABLEAU matrix. As you can see at the end of the worksheet, the denominators are slightly different i.e. L1^2 is missing. Why. Whoever finds the source of the problem is really good.Thanks to anyone who can answer.Greetings.  

How do I change the default font for drawings, from Font to Arial?    

Hello everyone!I want to calculate the coordinates of the mouse left click point on the solid model.So I tried the following, but the calculation is wrong. pfcSession_ptr mysess = pfcGetProESession();pfcMouseStatus_ptr MouseStatus = mysess->UIGetNextMousePick(pfcMOUSE_BTN_LEFT);pfcPoint3D_ptr Position = MouseStatus->GetPosition();pfcView_ptr view = mysess->GetCurrentModel()->GetCurrentView();pfcTransform3D_ptr Transform3D = view->GetTransform();Transform3D->Invert();pfcPoint3D_ptr model_point = Transform3D->TransformPoint(Position); The “model_point” is wrong .And I can't select points through the function "pfcBaseSession::select()", because there are no points on the surface, I want to calculate the position of the mouse click on the point position on the surface of the solid model.Can anyone tell me how to do it, or is there any other way,thanka!  

How do I give someone access to Mathcad portal?   

Dear Sir/Madam, I've been trying to simulate the behavior of a hub_chain with multiple contacts for more than two months and haven't been able to get good results. I would like to know how a contact_simulation is possible with the software and which criteria have to be considered. I have already created several costing models, including some: Symmetry_Constraints. The chain consists of two pins and eight links. I remain awaiting your response Best regards. Boris.   Translated by the Community Moderation using Google Translate----------------------------------------------------------------------------------------------- Sehr geehrte Damen und Herren,ich versuche seit mehr als zwei Monaten, das Verhalten einer Hub_kette mit mehreren Kontakten zu simulieren, und konnte keine guten Ergebnisse erzielen. Ich möchte wissen, wie eine Kontakt_Simulation mit dem Software möglich ist und welche Kriterien zu berücksichtigen sind. Ich habe bereits mehrere Kalkulationsmodelle erstellt, dar

Switch reference between assembliesAs you can see in the picture, two dimensions of a sketch refer to the assembly "50128267_WC121012" However, this is wrong.I want to have the referencing to the assembly "50128267_WC121012_REVC".How can I change this? Referenzbezug zwischen Baugruppen wechselnWie im Bild ersichtlich, beziehen sich zwei Bemassungen eine Skizze auf die Baugruppe "50128267_WC121012" Dies ist jedoch falsch.Ich möchte die Referenzierung auf die Baugruppe "50128267_WC121012_REVC" habenWie kann ich das wechseln?   

Hello, I try to to analyse gears using the mecanism application in creo 7.0.5.0.When i creating angular motor, this one is greyed out in the mecanism tree:As the consequence, motor can't be used in the analysis :(However when i create linear motor, this one can be retrieve in the analysis definition)Does the problem come from a license that we don't have for angular motors ? Regards,Arnaud   

after the update i found solid welds to still have the weld feature, but they are not shown... to fix this i had to go troug and open all welds, close them and regenerate the model. the problem is with some but welds, for some reason if a intermitted butweld has 1 of the bits of weld cover the original chain selected, it is not shown when the other parst are generated in the 3d model.for 1 interitted weld i had 11 welds and had it end and start with a weld, but the first and last one didnt show.i kind of solved that by trimming the chain by 0.1mm making the weld not cover the original start and end. but for this other weld i have used a short edge in the middle of a round bar and extended it to both ends, the only pice of weld  that dissapears is the one that happens to cover this original edge can someone please fix this as butwelds are anoying enof to make were whenever i enter a value that makes the weld not work, it does not give a preview, basicly making m