CAD

I attached a simple example (clark transformation). Assume that I do not know the relationship between Uabc ,Ualpha and Ubeta. How can I derive the final transformation from the known equations? Thanks. The file was writen in Prime 8.

how to set decimal places 2 for 3d and 1 for 2d in creo     

Hello, When trying to open a pdf from windchill on the embedded browser on Creo 5, I receive this error I tried following this article where this was solved Article - CS271042 - Downloading attachment of CAD document from Creo embedded chromium browser fails (ptc.com), however I do not have the Windchill Shell installed on my system. I require the embedded browser to be set to chromium_browser, otherwise other tools will not work. Is there any other known solution to this issue?  Thank you,Mark    

Hello dear members, trying to import file from following link in Creo, but its not importing properly, could anyone suggest the correct procedure to import? I tried importing but results are not satisfactory (see image below) https://www.mcmaster.com/4003K71-4003K727/  

I am using a step function to define the first two values which are slightly different than the subsequent values and was able to do this in MathCAD v15, but I have just moved to Prime 8 and the function no longer works.  The except from MathCAD v15 is shown below.  How do I do the same sort of iterative function in Prime 8? 

Hi all,I am facing the following problem:I am defining a function with four variables, three of them jsut a number, and one is defined as a series or sequence. (sorry if incorrect)I would like to obtain the maximum of the resulting sequence after the function evaluates the variables, but it looks that this is not exactly a matrix, since the max function is not working correctly:thanks all! PD: I have seen some solutions but I am unable to open those files. @MarkArmstrong https://community.ptc.com/t5/Mathcad/Create-a-vector-from-the-result-of-a-function/m-p/191688/highlight/true#M75105      

This is driving me crazy because sometimes, when I play with reselecting edges, the leader moves to where I need it, but for the most part I have to create a note and call out the dimension in question (workaround I would like to avoid) 

I have a 1 line BOM for a part and updating tables command or going from tab to tab blanks all the info out of it. I can re-add the table or right click and look at the properties to remind it they exist. The info shows up on the assembly BOM fine.Does anyone have any ideas? I may remake the part to get rid of this annoyance. This is the first time I've run into this 

The bore cycle in Creo Parametric 2.0 only seems to generate CYCLE / BORE which is G85. We need to bore, orient, back-off, and retract with G76. orient_angle and jog_dist doesn't output. Any way other than an Auxiliary Sequence all with CL STATEMENTS?

when we are going to export the drawing into the pdf the line weightage is increased. we are unable to find where I can reduce the weightage of that line. is there any setting in Creo where I can reduce the thickness of the line or weights. So' help us to out us from this issue.    

Hello, [Creo Parametric 9.0.3.0] Normally when I open a Assembly file I've to pick one of my representations before and that's ok but when doing a drawing file I've never picked a representation at the beginning because I've multiple of them display in the different slides.It never happened to me before that I had to pick a representation before opening a drawing file.  [Picture 1] Now I've been working in a drawing file with multiple slides and multiple representations, with the same assembly model for all of them. If I select a representation when opening it, some views in my drawing slides are changing too. [Picture 2] I correct it by going to each view again, and select the correct simplified representation as in the latest versions. But I don't want this to happen again. [Picture 3][Picture 4] Why is this happening? Does someone experience something similar?              &

Creo7 When using the IFX fastener dowel pin counter bore option it only allows you to put a through hole in smaller than the dowel pin. I would like to flip the counter bore around so the counter bore is larger than the dowel .Example: On a 1" thick plate Ø.2497-.2500 thru, C'bore Ø.281 x.5 deep. This way the press fit isn't through the whole thickness of the plate. 

Is there a location where all the various versions and what their updates entail ?     

Good morning, guys.I've struggling to complete the installation of the software of yours.It always ends up with an error, no matter what.The error message appears after completing 1% of the installation as follow:"Some applications failed or cancelled. Click information icon of failed application for details"Although, when I click it for further details, it just states the obvious ... that the "installion has failed " and it has created a log about the error , this which I could never find.Looking forward for a feedback for support.It's kinda frustating.And I'm in really need of the software right now.

In Creo Parametric, we know that there are 2 kinds of text in 2D sketch, one is to add text manually, and another one is to add it by parameter of the related model, and I want to know if we have some function or interface in pro/toolkit to access the text to change the parameter relations as the picture showed. Currently I couldn't find any similar function. I need the help....Thanks a lot! Bob 

Hi,As you see in the attachments, the thickness of the arrow line is so lean when export to pdf. How to increase that arrow line thickness? I tried using print to PDF but the result is same. I need the arrow lines to be at least 70% thick as same as the drawing line. or need to reduce the line thickness same as arrow line thickness. Please refer the image 2.

I'm trying to represent a tubular diagonal brace, and the pins that attach the brace to a structure, using beams. The pin beams have two segments so I have a node at the center to attach the diagonal brace to. The ends of each pin have a fixed joint connecting them to the holes in the ears (pictured in the first attachment).  The diagonal brace has spherical joints on each end so I have a beam release on one end allowing all three rotations. The other end has the Y and Z rotations released but the X rotation remains fixed to prevent  the beam from spinning about it's own axis. The trouble comes when I generate the solid mesh. When I have all of the attachment pins in the model, Creo Ansys will generate the solid mesh with no problem. As soon as I put a diagonal brace into the model, the meshing process fails, sometimes with a fatal error. Creo Ansys doesn't give any diagnostics, so I have no idea what the issue is or how to resolve it. Do I need joints between the ends o

Hello I am new to Creo and I am going thru the tutorials and during the Sheet Metal Sketch Form tutorial it shows the Add Taper check box, however in my Options box in Creo 8.0 that isn't there.  Is there an option somewhere to turn this on so it shows up?  Earlier in the Fundamentals I had the same problem where the Add Taper box wasn't missing as well.   

I was having problems with the MCDM converter and ran through a bunch of troubleshooting.  I finally got to the step of uninstall and reinstall.  Sadly, I have not been able to reinstall, getting 1% error.  I use this software often for school and I have a student license.  I am having trouble downloading the installation file also but got it on another computer.  Anyway I am going to take some snips of my screens and hopefully someone can tell me something to check to fix this.  I am getting stressed and desperate as I must have this software to complete my classwork.  next  nextnotice this closeup of above nextNotice again still showing Zero MB  The installer then sits here and does not download and after about 20 minutes fails and trying to restart it fails.  I have been trying to fix this for hours for the last three days and I am needing help soon. I am hoping somone knows something else I can do or try, I

Vacuum pressure is applied into the center of the chamber as shown. This pressure can distort the circle. A fixed constraint will anchor the square plate. (12 locations in total) Q) How do I give a fixed constraint? (You have to consider that the circle can be distorted.) The Creo version I use is 7.0. Creo super master please help  

I know how to change them to scientific format (based on ptc article https://www.ptc.com/en/support/article/CS124580). Is there anyway to change the scientific format to fixed format instead of the current years-long vote-consider-action procedure? This is a basic function needed in result presentation. Why bother end users to vote for ptc to take actions to add this basic unction? End users will not be bothered to vote instead of voting on using competitors' FEA software tools. Why ANSYS has this basic function but Simulate needs people's vote to have this basic function?

I am trying to idealize the bolted joint by advanced spring in creo simulate.  The axial stiffness can be calculated Kxx=EA/L Anyone could please tell aboult calculating the stiffness of bolt in Kyy and Kzz direction     

Hello everyone. I need to change the default diameter in the creation of the water circuit in EMX, in the options there is the entry WATERLINE_DESIGNER_DEFAULT_COMPONENT set like this:mm | meusburger | E2080_8_10 && mm | meusburger | E2000_13_14 && mm | meusburger | E2130_11_8_2_4 && mm | meusburger | HOLE_8, where I assume that HOLE_8 is an instance present in the HOLE.dat file, I should bring the default value to 8.5, in the file HOLE.dat I inserted a line with the name of the instance HOLE_8_5 but changing the options mm | meusburger | E2080_8_10 && mm | meusburger | E2000_13_14 && mm | meusburger | E2130_11_8_2_4 && mm | meusburger | HOLE_8_5 when I launch the creation of the circuit it always remains Ø8, something wrong?

It is necessary to express the power of the power plant in decibels.I go online and find out that bel is the decimal logarithm of the ratio of two physical quantities, the second of which (the denominator of the fraction) is called a certain base. In the same place on the Internet you can find the corresponding formula for the calculation.Here's how such a calculation might look like in Mathcad 15 with the help of tools for separating variable and function names into styles using different font colors (black, green, blue and white - invisible).If one watt is taken as the base, then the power of the largest Russian thermal power plant, Surgutskaya GRES-2, will be 96.812 decibels (see please the picture and the attach). We solve the inverse problem: given the power in decibels, it is necessary to calculate the power in the usual watts. Question. Why are decibels called decibels and not decabels? After all, if we multiply the logarithm by ten, and not by one tenth.   See please als

Hi I'm trying to solve an issue where I want the if function to work, when one of the variables in some cases could be undefined. Is this possible, or have some work around? I'm using Prime 9.