CAD

I need to transfer my license (PTC Mathcad Express) to another computer, as I have to return the one I am currently using. I know that there is a procedure to do this, which requires the Product Code and the HOST ID of the new computer. I was provided with a license for my 30 days trial, but I can't find a product code within the file that I received. Can somebody please help? Thanks

Hello.why (solve) operation give me another result for the same equation with a simplified way for (MAD).thanks 

I am using Creo Parametric Release 9.0 and Datecode9.0.2.0User is trying to access Sensitivity Analysis (Analysis -> Design Study -> Sensitivity Analysis) for part and the prompt "The option Behavioral_Modeler has not been acquired".I am wondering if this option tool is a toggle that I can turn on for the user or if this is an extension that would need to be purchased. If it is the initial, can you please guide me on how to turn it on for this user.PS. I have also tried following these articles for the user- https://statics.teams.cdn.office.net/evergreen-assets/safelinks/1/atp-safelinks.html- https://support.ptc.com/help/creo/creo_pma/r9.0/usascii/index.html#page/model_analysis/bemod/Example_Sensitivity_Analysis.html- https://support.ptc.com/help/creo/creo_pma/r8.0/usascii/index.html#page/model_analysis/bemod/To_Set_Behavioral_Modeling_Configuration_Options.html- https://support.ptc.com/help/creo/creo_pma/r8.0/usascii/index.html#page/model_analysis/bemod/About_Configuring_Behavio

Hi,I created a partial view with a colored zone. Picked my point and did my spline.Now I want the exact same partial view with a regular section black and white. Is there anyway I can copy the exact origin point and spline and apply it to my second partial view that I want to be the exact same?

This question was also asked about 3,5 years ago: Multiple-views-in-one-window   At that time, the anwser was no.   But is this possible nowadays?   I want to show multiple views in MBD, just like you can show multiple drawing views on a drawing. Why? I don't want our users to search for the correct MBD view to get the dimension they are looking for. (Did the enigeer put this dimension in the front view? Or the section view? Or the top view?)   If not, then MBD might not be very productive for us...

I am trying to display the results of a calculation using MathCAD PRIME 8's symbolics feature "explicit, ALL" The results are shown accurate to with 14 decimal places - which is way too precis for my purposes. I have been unable to fina a way to contol the precision of this display - Math Formatting appears to apply only to the final result. I attach two screenshots, one showing what I currently get from MathCAD and the other showing what I want. Does anyone know how to achieve this? Thanks in advance! Andrew

How to set a default developed length for all bends in a sheetmetal model to return to driven  in Creo Parametric 8.0 ?

I have 2 ode's that I solve using odesolve. However, I can integrate one of them analytically. When I do this, I get the error message "Too many initial conditions" even though I only have one for the remaining ode. Or can I not include the integrated function in the solve block?

we need 6 Creo Parametric 7.0 licenses for the US. Request you to please provide the details ASAP.    

What is more correct - Mathcad or Maple (SMath) Mathcad Maple

Hello,I want to display a model parameter on an assembly drawing.I know that I can display the parameter by adding the note: &parameter.But because the model is an assembly I have to add a number behind it if I want to display a parameter of a model in the assembly structure. like: &parameter:<number>.How can I find out which number I have to use for which model in the assembly structure?(At this moment I am doing it with trail and error 😞 )

Hi all,   I am very new CREO and have been exploring how to design PCBs in CREO. The Company that I work for requires to some work to be done in thermal analysis (Steady State and Transient Analysis) of PCB on CREO. I have tried to import files from KICAD. But when I try to import the .emp or .emn files all I get to see the PCB rectangle board. I have also tried creating a PCB on CREO but it doesnt come out correctly.   So I require further assistance/tutorial/reading material: 1) How design a PCB on creo? 2) How to open files from other ECAD Software? 3) How to go about performing a thermal analysis. Especially for the Material and Boundary Conditions. What are the limitations of CREO and how to deal with error while importing the files?    License Details: Basic.   I understand my questions could be quite broad and would require more details, but it would great if I can find something to start of with as it more like a learning curve.   Thank you so much

Hi! I am experiencing an error that states: This variable is undefined, even though it is.What is the problem here?I am running Prime 8. /Frederik 

in smartassembly, I use a chinese parametic in code. Creo must crash after run the code    

Hello everyone，Does anyone know which TOOLKIT or Object TOOLKIT function can be used to implement the copy geometry function? Thanks！  

Hello everyone. I wanted to use the refprop database in Mathcad. I used the file of Nagimov: Link below:https://github.com/nagimov/refprop2mathcad I also have the REFPROP installed in MS Excell and it works. I have windows11 and Office 2019.  But the problem when trying to get some result in Mathcad. It says: The range value specified is invalid: I tried different values, but it doesn't want to calculate. Any advice would be helpful RegardsJacob 

Hello.Is it possible to set the velocity of a servo motor depending on the load applied to it, inside a dynamic analysis?For example, the linear drive (or hydraulic cylinder) below, would have a variation on velocity, depending on the angle of the arm, due to the variations on torque applied to the electrical motor (or pump).This would go according to the motor's torque and speed curve.And, how to give a maximum speed? It would also need a domain.If, linear drive force F<=5000N, then Velocity (mm/s) is 20.If, linear drive force F>5000N, then Velocity (mm/s) is 20-0,001*FMy objective is to determine predict the magnitude of the velocity of the load. I could first get the force in function of time, got to excel and calculate the velocity in function of time, thengo back to creo and add it the servo, but this would need a few iterations and extra steps, before I get the equations correctly. Mr.  @SweetPeasHub, I have seen other thread that you participated,

I am using Creo Parametric Release 3.0 and DatecodeM010In my model I have two parameters that read : DESCRIPTION_LINE_1 and DESCRIPTION_LINE_2. These two lines show on my drawing title block as two lines of text if the description of the part is too long to fit on a single line.Is there any way to combine these two parameters so that in my BOM on an assembly drawings both lines of the description appear?Currently I am only getting the first line of the description based on the report parameter asm.mbr.description_line_1

I have created O-ring model with revolve feature with ellipse cross section with axial and radial distances. Now i want to assemble them and simulate the actual assembly condition. case 1 (Assemble on the shaft groove): inner diameter is constant and outer diameter will be squeezed which change the cross section of the Oring axially)  case 2 (Assemble inside the Hole): Outer diameter is constant and inner diameter will be squeezed which change the cross section of the Oring axially)  Is there a way to create a o-ring with reflect the assembly condition with relations just by changing the ID or OD rather than changing the cross section manually ?  

In case anyone else is considering this upgrade. This Windows 11, version 22H2 update required uninstall and reinstall of FlexLM license server. The machine getting the update is the server and FLexLM was not functional after update.   There is a history of a Windows 10 update also causing the same requiring a reinstall of FlexLM license server.

The similar question was in article CS227984, but there is no answer.See video:https://drive.google.com/file/d/19DslfMO13wwg_oEGFs01VKbD_yPcI6hL/view?usp=share_link When loading the same version of part in Creo3 and Creo 6, regeneration occurs differently.In Creo 3 have not failed elements when regenerating.In Creo 6, some features fail even though the model version is the same.File config.pro the same.Question: on what settings depends the result of regeneration in this case?     

Hello.I had an issue using the function (if) as shown below picture, can you help me to solve it?thank.  

Is it possible to pattern a pattern of patterns?I am able to create a pattern of patterns, but i would like to know if i could create another level.I have tried several times, but pattern interface is disabled. See the image below, can i create another element that creates a pattern which includes father and sons?  

Hey why do I get an error when I want to define values?I'm just learning the program 😞Any help appreciated!   

Does anyone have any tutorial on exploring all the options in GD&T advisor.