CAD

Hello, Thank you.Mathcad Prime 7 file attached.

Hello, Thank you.Mathcad Prime 7 file attached.  

I installed Mathcad Express (7.0 and 8.0 tested) on reseted windows 10 and it worked correctrly. As soon as I installed NET 7.0 (https://dotnet.microsoft.com/en-us/download/dotnet/thank-you/sdk-7.0.102-windows-x64-installer ) and rebooted the computer - a bug appeared:- create a text field (Ctl+T), enter the text;- enter the formula (Ctrl+Shift+M);- select the text (Ctrl+C);- paste the text - it is inserted without a formula (but if you copy only the formula, then it's copied correctly).Strange things:- The bug remains after NET 7.0 uninstalling. But I tried several times to reset windows 10 and after it bug is disapeared. And bug bring back every time after NET 7.0 installing and computer rebooting.- All others clipboard operations works correctly - only pasting text+formula into text area works incorrectly.Please give me a hint, what is special about this functional realization? Otherwise it is not clear what to write to NET developers in bugreport.   

  Highlighted thing shows whenever i keep the view normal. can anyone help me? This problem is only with part.

I have multiple closed sketches on a body. There are thousands of these sketches. I would like to create separate  parts or features from these closed loops . What would be the fastest way besides Creo Toolkit.

Prime 8 . No file attached. Trivial inputs. How do I get 3 ?          

Many features previously used in MathCAD 15 are not available in MathCAD Prime. Is it possible to purchase the version of MathCAD 15, and if so, how much does it cost for 1 seat?Sincerely, Sergey Maslov.

I am using Creo Simulate Release 7.0 and Datecode7.0.10.0I am trying to run a dynamic load analysis for a large cyclical imbalance on a shaped beam. I can get the modal results. I applied sinusoidal loads in two directions to simulate the rotational imbalance. Simulate runs through the time analysis but I get no results. It looks like the load is not being applied.

Hello, s is a variable.The result should be: It seems that Mathcad Prime 7 does not want to show the result, to calculate...Mathcad Prime thinks, thinks, and thinks again.I gave him such a complex calculation that he can't do even that much?

I'm looking for what used to be called "Start Point" in sketcher -- or some other way to tell Creo where to put the sketch on a trajectory.  I see the  Setup > Feature Tools > Start Point, but it's always grayed out, not available.  I want Creo to put the sweep sketch at the other end of the sketched trajectory. In a search, I found another post about this, but the answer is for a much older version, so doesn't seem to work with Creo 9.  Is it another silly hidden magic click?  Or a completely different process?  Thanks.

I have an issue that just recently started where when I have an open model I can not drag the green insert here bar, even when I have the item checked out.  This is happening in prt as well as asm model trees.

Hello all, We are using the Windchill 12.0.2.2 and we would like to integrate our current windchill with the AWS IAM for the user management. So is it possible to do or use the AWS IAM as Active directory with the windchill. I tried to find some details over the google but didn't get any conventional details. It would be really helpful and appreciated if i can get some details on it, Thanks in advance.     

I am using Creo Schematics Release 4.0 and DatecodeM010Creo Schematics 4.0 : How to get the wire color and wire label color visually update, automatically by selecting wire parameters from the datbase. black., If we select the BLK color wire from data table, Wire color and wire label color displays to be updated in Black.

Hello I'm struggling with PTC_WM_* parameters while MODELCHECK.  When MODELCHECK done it's job it shows me report where all of the parameters are marked as non existing in start part. But all of this parameters was created by Windchill in my start part and than start part was exported to the folder where all start parts suppose to be. How can I fix this problem so my MODELCHECK see PTC_WM_* parameters in start parts?Thanks in advance.      

Weird one this...I get random floating point errors in a quite intense worksheet. If I cut the offending formula and paste it, the error disappears.The worksheet contains too much information to attach it. I just wondered whether anyone had come across this and whether there is a solution. I've also had problems with some plots in the same worksheet as it says the matrix should have real numbers. I have added the Re() function which seems to deal with this problem most of the time. There are no imaginary numbers in my calculations that I am aware of. I'm reproducing calculations that run happily in Excel.  

When acquire license, it is state that could not establish secure channel for SSL/TLS with authority 'apps.ptc.com'.

The only user id information I can find in performance advisor, as shown in https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS197086‌, appears to be encrypted.  How can I use this to identify a user?

I am using Creo Parametric Release 7.0 and Datecode7.0.8.0When opening a second model, the new window opens behind the original window.

I recently had to switch to Mathcad Prime when my renewed license would not work on Mathcad 15. But in prime the converter button is greyed out. I have multiple files I still need to access so that I dont have to recreate them. Is there a solution for this. My current will not open 15 at all.   

It would be possible to extend my Mathcad trial student license because I'm didn't get to use the first 30 days due to a personal issue, so, now I hope to get familiar with the software and the advantages that it could bring to my studing process.Thanks!

Often, I am faced with this window: Problem is, its yes/no buttons are not responsive because the system is waiting for acknowledgement of this dialog box: Sometimes, there are several of these warning boxes, and often, they are hidden behind other windows and not accessible except via moving them "to the front" via the taskbar manipulations.   I am wondering if there is a config.pro option to prevent the application from displaying this annoying (on so many levels) warning dialog box.

i want to transfer my license from old computer to new computer. we don't have contract updated. Where can i download creo parametric 2.0 thank you 

As per the original post..   Hello. Can you help me to convert this file to MCDX? Thank you very much.

How can I copy paste the table from one to another in Prime with unit?

I am using Creo Parametric - Release 3.0 (connected) 3.0 M100Edit Parameters Tools menu is missing options and the parameter list is abridged. There are tons of missing parameters in this particular manufacturing model. CL_DIST is a big one that my Post Processor uses and it has gone missing in the parameter list. Starting a new manufacturing file remedies the situation but I need to know how to fix the one that is already complete as there is a lot of work already done and starting over every time this happens is not a solution. I need to know how to correct this issue if it ever happens again. I did attempt to export the parameter list from a good model and open in the broken one but I receive a long list of errors stating not valid.