CAD

I am attempting to add a marker on a pre-defined cable assembly. The part is in assembly mode, and I am unable to open the cable assembly separately. I see online that I am supposed to use a marker.  To Apply Marker to a Cable1.Click Cosmetics > Marker.The Marker tab opens.2.Select a segment of the marker.3.To accept the default length, diameter and thickness click the check mark. 4.The marker is created with the default values and the tab is closed automatically. I cannot find the 'cosmetics' icon to create the marker while in assembly mode. Can anyone help direct me? 

As per the original post.    Can someone help me to convert this file in mathcad 2020(mcdx)?

Hello all, I have been working on this project to evaluate Weight as a function of Pressure, however, I haven't made much progress as I continuously get the error [Replace complex values and NaNs with real numbers]. I've been using Mathcad as a means to avoid coding but at this rate I may need to. Best, Cruz J.

Hi, I am a secondary teacher I am using Creo parametric 7.02 and there seems to be an issue in the render studio. When editing a material I alter it in terms of rotation or scale and then when it’s rendered it changes and isn’t what I have set up. Has a anyone else had that issue or can you give me any advice.

Hello, ProGtoldataPlacementGet is deprecated in Creo 9 and it says that it was superseded by ProGtolAttachGet. One of the fields that ProGtoldataPlacementGet would retrieve is the ProGtolPlacementType which is the field that I need. Is there another way to get the ProGtolPlacementType, or do I have to convert the switch cases I have over to the ProGtolAttachType instead? Thanks,Mark

I have a very annoying problem that I have just recently discovered in my FEA models. The issue appears to be present in an older version of Creo 2.0 and an a newer version of Creo 7.0 and it has taken me countless hours of frustration and failed meshing to figure it out. For some reason I can take a model where all my pinned joints are perfectly aligned (this can be verified by checking with the measure tool) and import them into Simulate only to have them shift ever so slightly (like 0.00003mm misaligned). The problem is that the shift is just enough to prevent AutoGEM from meshing the parts and no amount of reconstraining or regenerating the parts will fix the misalignment. Generally the only way to fix the problem is to close out everything and reopen the models and try meshing again. This is incredibly frustrating and wastes a significant amount of time. Anyone know how to fix this?

Hello guys, I am new to this forum and this is my first post. I would appreciate input from others regarding my problem. Maybe I did a stupid mistake so please excuse that. In the picture you can see that I assigned all the Units regarding my Problem that I want to solve for, but nevertheless, mathcad tells me they are not compatible.   

Hi all Sometimes, my users doesn't defined clealy their kinematic links.They forget to put a regen value and active it.... I activate the MECH_COMPONENTS and set it to W in interact, but when i test it, MC only show me the parts with kinematic links even they are completetly defined. Can i set ModelCheck to control the correct definition? Regards Dom

From what I can tell, if I want to change the model representation (using a simplified rep) that is used in a view and a repeat region BOM, one must change them both separately. Either one is changed/switched, the dwg deletes all the attachments and balloons that have been organized to each component, and this is regardless of which one is done first. Does anyone know how to swap both the view and the Repeat Region Representations so that the balloons and attachments for the remaining components (the ones not excluded by the simp. rep.) are not lost?

As per this thread - same issue   Good afternoon, Sorry to reopen this old post but it is related. I'm trying to open a drw via Jlink, it works correctly BUT it don't open the window with the various sheets this: Instead of this:   Anybody has some hints?   Thanks in advance.

I need to support two licence files (different companies) on the same server.  Its easy enough to set the ports to different numbers, but ptc_d insists on creating lockptc_d in /var/tmp.  Setting TMPDIR doesn't seem to help.   Does anyone know a way (or an environment variable) to force it to create its lockfile elsewhere?   The issue is that when starting the second server, it can't open the lockfile and then dies. Thanks, 

I can hardly believe that I did not ran into this bug in the past. Or maybe I am blind and doing something wrong? Why is the horizontal base line if the second triangle not drawn in the combined plot? IMHO it should work (and I hesitate to say so, but it actually works OK in Prime). Has anybody already experienced that bug? Has anybody an explanation (other than "buggy programmed" 🙂 Has anybody an idea for a workaround? I thought that using complex numbers may be a way to get what I want, but, alas, to no avail! BTW, the problem goes away if the tringles don't share the common point (1;1). More precise: The problem seems to be that the last point of the first triangle is the very same as the first point of the second one. Sure in this simple example the order of the points could be changed to circumvent the problem, but in an automatically created list of a larger number of different shapes this seems not to be an inviting option. Any ideas are welcome. Mathcad 15 file attached &nb

I am implementing a material nonlinear simulation for an aluminum tube. I fixed an end of the tube and used displacement constraint to another end.The ultimate stress of the material is 440MPa. What simulation or how to set up parameter to measure the moving constraint when the ultimate stress reaches exactly 440Mpa?   

Im modeling some chunks to export in .stp to mastercam. Can i set the origin  in creo elements/direct, so when i export my chunk to mastercam i allready have my "zero point" where i want?   Thanks 

Hello, I'm trying to make a stack in Creo, but the button to start printing is disabled.  USB is currently connected.  Is it a problem that requires a separate license? Or is there another problem?   Thank you.

Dear PTC Community,maybe this is trivial, anyway I ask: how to do left-handed threads in PTC Creo Parametric 9.0?Thank you for your cooperation Stefano Cristofanelli

I've got new computer and trying to install MathCad with my product license, but the license wizard says that the "Program ID already expired" - does that mean, I can't use my license?

Can someone help me to convert this file in mathcad 2020(mcdx)?

I have modeled half of a sheetmetal part. I then selected the part in the model tree and mirrored it. In the options for the mirror I have selected "Merge to model". How do I join these two parts along the seam created by the mirror, on the top surface? I would have thought that "Merge walls" was the tool I needed, but I can't get that to work with any combination of selected surfaces. 

I am trying to create a template for my company using Mathcad Prime 7.0.In the template I need to create excel parts in order to reproduce some tables. I have used the command insert object. The problem that I am facing is that the resolution in the final document once saved in pdf is not great, I should say it is quite poor. In addition, if I close the excel file and I open it again to add additional parts once close it doesn’t show the new parts in the Mathcad page. Is there a way to solve these issues?

We are having an issue with the model tolerance showing up when we export a drawing to PDF.  We've tried changing the tol_display option in the .dtl file but that removes all tolerances (even in dimensions).  Any help on getting this to not export to the PDF would be greatly appreciated!

I am trying to implement a search path file for the first time in an assembly. I have it mostly working, but there is one component I don't fully understand. In the directory where the assembly is located I have a config.pro that points to the search_path_file (search.pro) located in the same directory. The search.pro then points to 3 other directories where appropriate parts for the assembly are located. In the search.pro, I have the directories contained in quotes because they contain spaces. How I would expect this to work:Launch CreoMy start-in directory is in My DocumentsI "Select Working Directory" and choose the directory that contains the assemblyThe parts are found and the assembly loadsHowever, this doesn't work. Parts are not found and the assembly fails. In the Creo configuration editor, I cannot see the working directory config.pro nor the search_path_file option that in that configuration file. As seen in the image below, using this method, only the master confi

I am using Creo Parametric Release 6.0 and Datecode6.0.0.0-61 error every 15 to 20 days coming,The Port problem was detected (7788) last time it was resolved but the recently same problem was repeated.LmTool also reinstated and check along with FLEXnet also but after a period of time it happened again and again Here are the errors that I faced-61 error

is not working and I do not have the product code

I am using Creo Parametric Release 7.0 and Datecode7.0.5.0How can we configure Display model modification history tabs in Creo ( Item name, Change description, User etc)(OR)Where I can find the property ProParameterVisit().