CAD

Hello folks,I'm a new user for Creo Schematics (specifically using Schematics Lite 12.0) and I've been trying to modify the sample catalog into a broader Template for my org to use, but I'm having trouble actually saving the Template file such that any of my changes actually stick. My workflow is as follows:Open an instance of Schematics and load in the sample catalog. Delete the provided design explorer sheets.Modify the sheets in Catalog Explorer (simply swap the PTC logo and address for my company's on the A3 sheet, for example)Save As to an RSDT file.Having done that I would expect that when I open a file and point to this newly created Template, the A3 sheet should have the logo and address but it doesn't.What exactly am I doing wrong? The documentation on Schematics is sparse.... Cheers,Boris

Hello All,I have attached MC-P11 sheets. How can I  extract the segment lengths values "L" out of last iterations of this following function. There are two conditions as you can see in subsequent calculations:                            1. For Element B in Compression, comp="B"2. For element C in compression, comp="C""L" values can be different or same depending on above conditions  and  segment lengths.Regards,Sam

I just installed Creo Parametric Educational Edition 11.0.0.0. I am getting a black drawing screen. I am using a laptop (Specs- 12th gen i7 & Nvidia Geforce RTX 3050Ti) 

Hello,I'm using Mathcad Prime 11.I'm trying to solve a differential equation with conditional logic (if) due to the presence of a diode in the circuit.The input values are defined, and in the worksheet, some graphs are already plotted (e.g., I_TEST, VL1N). I'm using Odesolve to compute the solution. Is this the correct approach?It doesn't work with the following error "Plot failed"Cou you help me? Thank you very much

Good afternoon i'm using Creo parametric 11 with the intelligent fastner lite version.I would like to know if it possibile to modify or add some screw starting from the template for have my personal codification.Thank you for your time and help. 

I'm using Creo Distributed Batch to batch export DXF, but I found this tool will divide drawing sheet to single DXF file, how can I to export them as 1 DXF file ? My CREO version is 8.0.3.0

I am using CREO 12.4.0.0 , In the interface of CREO Installation Assistant , After following all the instructions and adding the simple license "BK800908EDSTUDENTEDUNI" and the id password the source is added and its status shows Not Suitable. what to do ?

I don't have a graphic calculator. I only have MathCAD 9.0.0.0. Is there a way to graph the following steps in MathCAD......or to solve for f another way. This is just an example problem. Once I learn how to do it, I can use it on my homework problem. Here's the full context of the example problem...Thanks,    Brent

Using the basic motor (DCPM) motor equation ...electrical and mechanical which have differential equations. I can solve the differential equations in a solve block. I want to create a sum squared error between the measured data and the model, and then using minerr to estimate the motor parameters. The measured data is Ia vs time and rotation speed vs time. But I cannot have two odesolve in one solve block. Can you help please... thanks. 

I am using Creo Parametric Release 4.0 and DatecodeM080Fatal Error :- Fatal Error Encountered. A Traceback has been written to C:\users\public\Documents\traceback.log Please send it to Technical Support.Here are the errors that I facedFatal Error Encountered. A Traceback has been written to C:\users\public\Documents\traceback.log Please send it to Technical Support.

Check out this video on Creo Harness Assembly by Adam Manfredonia (Creo Solutions Consultant) and Tom Quaglia (Creo Solutions Consultant). 

Our target is to generate a pressure tight cover, closing the end of a hole (cover fixed by e.g. a circlip), and pressure is acting on the inner side of the cover.    See Picture 1:The problem is, that as a result, the software cannot generate closed  walls / a pressure tight part / even if having a load at the middle.  we got only a simple result like this:  Could somebody provide solution possibility (what settings we have to consider) to achive closed (pressure tight) geometry?Thanks to all of you in advance.

Does anyone know the context argument (third argument) of ProParameterTableExport using the toolkit that match looking at an assembly's parameters using the filter "Current and all assembly features and components" in Creo Parametric 10.0.4.0?  I am having issues trying to get all of the parameters using PRO_PARAMTABLE_EXPORT_XML.

I am using Mathcad Prime Release 10.0 and Datecode10.0.0.0"The license request failed. Requesting MathcadPrime" in the license field

Hi there Can you help to reach a graph merged to the classification I have I have this graph and I did a classification to the data in this graph ... what I need now is to merge the classification with the graph and make them obvious layers and then find the average in each layer like this By obvious layers I mean > a program wil be able to say from z1 to z50 >> it is a sand layer and the average Q in that layer is 10 MPa ( as an example) Is that possible ? Thank you in advance .. the sheet is attached  

Check out this video on Next Generation Model Based Definition with Creo and Windchill from PTC Application Engineers & TechAzul). Presenters: Mark Nielsen (TechAzul) and Tom Quaglia (Solution Consultant, Fellow)Original Date Presented: January 09, 2025  

要麻煩貴司協助將R角變形的面修順，我該如何做呢? 能否請負責AUO的貴司同仁聯絡我 

Hi everyone,I’m working in Creo Parametric 12 and I want to make hidden lines in my drawings more visible(you can see in photo 1 how it's now). Specifically, I want:Dashed segments to be longerLines to appear clearer for printing and on-screen viewingI think i have to add a line to my drawing settings but i don't know which one. Could you please advise how to achieve this?Thank you

I want to fit my experimental statistical data, which looks very close to a Gaussian distribution, by a perfect Gaussian distribution. I'd like the amplitude, mean/center, width/signa, and background/vertical_offset to all be adjusted for best fit. I know that this can be accomplished using the genfit function; but I suppose others have already done this so that I don't need to reinvent the wheel. I'm running Prime 9.0.0.0.

Hi, I am new to mathcad and trying to input result from a formula as attached. However, the error red that stating the value must be a scalar and vector. How I can fix that? Appreciated to your guys response and help Thanks, Kala

Creo is managed by our company with some standard settings. Every time we open Creo the config.pro and the mapkeys in the run directory are overwritten with our companies default settings. I have added in my user level config.pro and system colors, but am having trouble doing the same with the mapkeys. I followed the instruction in the support documentation, but when I click find in the config.pro and search for "load_mapkeys_run_dir" it doesn't exist so I cannot change the setting to pull from the designated location outside of the run directory.    

hi wondering if anyone can give me any tips or help? I'm very new to mathcad and using it to create a compressible nozzle with multiphase gas-particle flow. I'm having trouble calculating the velocity of the droplets with an initial velocity of 1. when implementing with rkfixed the vd0 says 'unknown error-ODEtoofewinit'Any help would be appreciated if theres a better way to solve? thanks (g=gas, d=droplet)  

I want to create a toolkit application that can integrate PowerPoint into Creo. Basically, I would like my application to generate a PowerPoint with information about the assembly and part views and parameter information. Is there any library that could do this integration?

I am using Creo Parametric Release N/A and DatecodeN/AHello we bought a new locked license for Creo Design Essentials but i cant find the program on the download PRODUCTSCan you please help me i send me a link to download the earlier versionregards

Mathcad Enhancement Proposal (MEP):  Extend the Document Spacing functionality to minimise the vertical or horizontal spacing between regions   The "Separate Regions" functionality is a useful tool for organising a Mathcad worksheet.  However, quite often I find myself "wasting" time doing the opposite - removing spacing between regions.    The usual scenario is that I write partial functions and/or evaluate them as I develop the final form of a function or set of functions.   When I've got the function in its final form, I delete the regions that are no longer required, which leaves me with the task of closing up the gaps their deletion leaves.  This is the kind of mindless activity best left to automation.   An additional button in the Document Spacing group to minimise region spacing, either horizontally or vertically, would be a useful asset to aid in this and other use cases.   Additional MEP:   MEP - Auto-increment spacing b