CAD

Anyone know why fluid domain color is red in flow analysis i have add fluid and solid domain and generate the mesh but it not generated for internal fluid domain i also attached the reference image  

I am new to PTC but not new to FlexLM license servers.  I have one server with 3 different apps with their own FlexLM.  I have another server with just one application so wanted to install this new PTC license service on it.  I was able to get it to install and the service to start but it will only activate one license at a time even though both services are started. Is it possible to run the PTC license service along side of another application?  I found a KB that says yes, but does not explain how.  The online instructions are not working as both are conflicting with one another.

Currently it's not supported by Pro/TOOLKIT to do also a "Revise" beside a Checkout of an object from Windchill using ProServerObjectsCheckout() like it's written in Article - CS254712 - What Revise and Check Out options in Windchill PDMLink are supported by Creo Parametric customization.This functionality would be a great improvement for further CREO-releases.

user should have ability to replace/reselect failed references in remove feature like in this example:current functionality is very limited here!User can only delete wrong references or all...Standard selection with <SHIFT> (up to boundary) should be accesible here 🙏

hi All i acutally have the same issue as this post here:https://community.ptc.com/t5/Customization/Using-the-VB-API-to-create-a-drawing-with-a-custom-template/td-p/17502 but the possibilities to fix mentioned there do not work for me, does anyone has an idea? i am using creo 7.0.12.0

In a Design Exploration session, I want to be able to save a STL or STEP file of each solution ; Currently, the save as option is not available

Hello fellow engineers, Recently I updated from Creo 7.0 to Creo 10.0. I am in the middle of a project so maybe it wasn't a good idea. When re-running a buckling analysis that used to return a BLF of about 2.5 in Creo 7.0, now I get values of about 0.5!  Has anyone noticed this pattern? I believe the new 10.0 version is overconservative, as I have done hand-calculations to verify the buckling mode and the plates are nowhere close to buckle.  I believe the solver must have been updated. The model in question corresponds to a crane with a telescopic boom, where the contact pads (usually solids to allow for contact definition, non-linear analysis) are replaced by a beams (linear analysis). 

Hello, I own a student license and I use a desktop to make my school work at home but i do own a laptop that I take to classes due to it's portability, even being worse than my home desktop, I would love to use Mathcad on both but when I try to activate my license on my laptop it says that the maximum number of license requests were made, if I can't use the software on both my desktop and laptop it gets slightly useless, so I would love to solve this issue

Hi,One of my customer is facing issue when he tries to open the Creo elements direct modeling. The error says as LISP error, CAD Angle is not allowed. Kindly help me with a resolution.ThanksNaresh

Good morning community, I have a general question about how Simulate reports rigid modes when "with rigid mode search" is checked.  I created a simple part with a surface constraint and released 1 DOF (in the Z-direction).  I would expect Simulate to report at least one rigid mode that would show the assembly translating along the Z-direction.  The animation does show this but it doesn't say it is a rigid mode.  Wondering why that is?  Is there a frequency threshold before Simulate reports the mode as rigid?  I released 2 DOF of freedom (in Y and Z) and then it does report rigid modes.  However, when I animate it, there is some rotation of the assembly in the first mode which I would expect only translation.  I attached my assembly file.  

Buen dia comunidad, tengo un problema del grafico de una seccion rectangular donde deseo graficar segun las coordenadas de un matris como se ve en el archivo adjunto, por favor si alguien me pueda oreintar. Version de Mathcad prime V.10.gracias... 

Hi, I need help. I don't know why it can't find the variables.I have Mathcad 9.

I am having issues with importing a term table .csv file into Creo schematics 7 and unsure where to look or correct on the issue.  The table seems to work fine with 1467 entries and seems to start having issues of not loading and locking up schematics when additional entries are added beyond that.  I am also uncertain if any blank cells have to have an entry of UNSET or if they can be left blank.Is there a limitation on the number of SET columns that can be created. Any advice or suggestions would be helpful.Thank you,Scott

I am developing a UDF for screw threads and ports and need some support understanding whether a certain implementation is possible and how to manage references to make it happen.  Insofar, I have defined UDFs with a coordinate system that every other feature ultimately points to and placed these UDFs using that coordinate system and one placed in the model, or the on-surface coordinate system option. My understanding is that the basest feature(s) appearing in any UDF will be what all the other features ultimately reference.  Ultimately, we would like these UDFs to be placed with reference to an axis the screw goes along and the face the screw extends from. However, I'm struggling to figure out if it's possible to manage references in such a way that those are the reference prompts. I have been experimenting for a while and can't arrange datums in a way that accomplishes this.  More broadly, I've been having some trouble defining UDFs to point to anything B

I define a vector variable X (using a program block) in one part of the MathCad document.The variable is computed correctly and I can access any element Xi later on by the expression Xi :=However when I try to call Xi inside another program block further down, I get "This variable is undefined" error.Would appreciate any suggestions.

I can't seem to delete a cable break after placing it. I don't see the "X" that is supposed to represent the cable break in the flat model. Anyone experienced this issue?The only way I have been able to successfully delete it is to delete the entire cable segment.

Good afternoon,  I am new to using GD&T advisor, so far as a tool i think it potentially has a lot of benefits. However i am at a stage where i have completed all the GD&T definitions, and now want to add some traditional dimensions, eg. linear dimensions from datums to plane surfaces. When i try it says 'no applicable reference'. I am unsure how i can have traditional dimensions along side GD&T

I am using Creo Parametric 10. I am encountering a similar issue to what is described here: (1) Replace by unrelated component and asm0001 already... - PTC Community. From that, I am able to delete the "asm0001.asm" from my workspace and that allows me to use replace by unrelated component. However, when I try to upload the "replacement" part to Windchill, I get the error "Assembly - asm0001.asm is not unique".  I checked the Reference Viewer in the part, and asm0001.asm is not listed. Where else can I check to break the reference? The part file is a family table, if that matters.

Trying to make a plot where the line type is just a dot for every point. This is useful for eye diagrams. The interface behavior is really strange...It won't let you select it.  I'm using 10.0.1.0

after installation of creo 11 student version the screen became black and no entities are highlited when drawn. My graphic card is RTX3050. windows 11

I am looking for a feature in Creo that allows you to select faces of two features and determine the relationship between them. For example, in SolidWorks, if you select two flat surfaces, it will show whether they are parallel or perpendicular in the bottom right corner or the analysis window. Similarly, if you select two circles, it will indicate if they are concentric or offset. Is there a feature in Creo that provides similar functionality or something close to it? Thank you.

Hello,In mathcad prime, is there a reason why prime ( using P9)  keep losing some images that i pasted in a sheet and replaces some of the images with " Browse for Image?Thanks,Sam

Hi,Find V2 voltage.  

Hi I'm trying to make an asynchronous app that help automate some processes.is it possible to iterate through all parts/sub assemblies in an assembly and add all components with a specific file name (test.prt for example) and add them to the selection buffer? I want the user to have the option to right click and hide/exclude/delete the selected components.   any example of how to add components to selection buffer will be appreciated. thanks 

I can define the thread hole format in the .hol file after  edit CALLOUT_FORMAT line.but i can't define the countersink hole format based on this way, anyone can tell me how to define that? another problem is how to hide the zero after the decimal point?