CAD

Hello! I am working in mathcad prime 9.0.0.0 and am wondering why mathcad calculates end result units like this:why do the units on the results automatically display as such? To me it would be logical for it to display kip x ft as the unit since those are the units of the values being multiplied and is also a commonly used unit for moments or torques. Is there a way to get it to automatically show kip x ft as the units? 

Hello, I just wanted to ask if there is a way that I can adjust my line thickness while using the HLR mode? let's say there are some parts in the model where I want thicker lines and other parts of the model with thinner lines. Thank you 

As a disabled user with only one hand, I need a way to setup Creo Parametric to only use Mouse buttons for PAN. This is the only function that I cannot seem to find a work around from Shift + RMB to PAN in my model. Yes, I can use the Pan icon and have been doing that, but it is extra clicks and impacts productivity. Other CREO PTC applciations have the ability to modify and control the Pan/Zoom/Rotate features (Creo View, Creo Elements etc), Creo Parametric does not have this ability for those of us that need accomidations due to physical disability and limitations. When will this be fixed for the user community?

Hello, Looking for the information to import the wirelist from Capital(Mentor Graphics). i am trying to use wire information from capital harness and creating 3d cad in creo. I have downloaded the xml from creo but when importing the xml getting below error message.  these are the file extension i exported from mentor graphics. 

Hi, I have created a PTC account. Now, I am facing a license error in the PTC account, In my account, I am getting an "Access Denied" error in the License management section .and I am unable to resolve it. Please solve my license error as soon as possible.

I am using Creo Parametric Release 8.0 and Datecode8.0.3.0I want to be able to snap a new line in sketch mode to a custom palette symbol without have to break the symbol into draft entities.

I am using Creo Parametric 5.0 5.0.6.0How to configure installation so run Node Locked license before running Floating Server License? A user has a Node Locked license, but also needs access to Floating Server license pool.When user runs Creo, floating license is pulled first. The goal is to pull Node Locked license first.

I have a customised table for fetching all parts all parts from model tree . But the error in the table is it does not display alphabetically / in order of the model tree. E.G:- it goes like 001,003,002. but I need it configured as in order. Can anyone help. Attached is the file.Thanks in advance

Hi, Do we have an option to create an animation for Hose/Flexible pipe in Creo? Appreciate for your response. ThanksNaresh 

PLEASE add a dark mode option and/or color options for the background and text.

Hello,I have a network folder where the icon is in the path F:\Config\Creo\Splash\Icone.ico , when I go to put an image on the CREO icon on the desktop it doesn't appear, the folder has all the permissions because CREO is saved normally, but the image doesn't appear, what could it be?

I know it's a weird Q. I thought worth still asking. Options to build cable, like something as shown in image attached. THANKS!

Consider that I have an assembly model with me which is designed in a different CAD software (Eg.: SW, NX...)Now, I have imported that geometry into CREO environment. Now, I`d like to find out the mass properties, Centre of Gravity & Inertia of the same imported assembly. This is where the question comes in... Now, if I don`t define the material properties, is there any way to find out the above mentioned parameters??? Because I have heard that SW has this feature & I`m curious if CREO works this way or not.Please feel free to answer. I`d humbly appreciate your replies. CiaoSrikar Sarma

I am using Creo Parametric Release 11.0 and Datecode11.0.2.0I've built a PRO/Toolkit project in exe (SPAWN) mode. While registering it, I'm getting the following error.Here are the errors that I faced"Foreign program did not initialize properly; a communication problem may have occurred."

Hello people 🤗 Mathcad 10 Prime User here,In my picture below you will see that the equation is giving me a very weird answer. I guess it has something to do with a vector problem, but I tried everything and can't figure out what the problem might be. And I also don't understand why my "header" is showing an error. The table from Excel should be my answer. Don't get confused by "yi"and "y" - it's the same thing, it can be ignored. I also send the mathcad pdf (i don't know why I can't send the actual file but anyways - it always said error) - all the equations are correctly written. Thanks for any help.Saro

i want to download math cad 11 for students. I already have the version 10. How can i update my math cad? thank you

Hello,I have few harness installs that are needed to be converted into either .obj or .stl files. It is not convertible directly. IS there a alternative way to do those. Please help. As i need those to be worked on in a 3D software Blender. Which accepts either of those two file extensions as inputs 

Hello team, in one of our use case, we need to show multiple WTPart's details in a drawing as a table format. there could be 100 WTParts with ~15 attributes each. so the data will be sppaned across multiple sheets. as of now design engineer has to manually create table and fill in all the data and we want to automate the process. Solution:fetch the data from windchill using queryspec and populate the as "Parameters" of the drawingcreate a "Table Template" as file with '&variables' as key and add same Key values in 'Parameter' table.user then will select the table template from 'Table From File' option and place it on drawing, the drawing will automatically fill out the variable values from 'Parameter' section. downside too many parameters are getting generated as of now. if drawing has 20 related WTParts with 20 values to be shown the 20 x 20 = 400 key values pairs will get generated. but it saves a lot of manual data filling.we have to create a table templ

Dear all, I'm exploring the functions:numerdenomAnd I've encountered the "oddities" in the joined MathCAD file (see what highlighted in pale yellow and the text; in pale blue some reference results for information) To be honest I suspect multiple bugs... If I'm wrong (i.e. we're not dealing with bugs...) , can someone explain me the logic under the quoted functions behavior, because I really cannot understand... Many thanks in advance & Best Regards 

Greetings, Regarding the Creo AFX start_mdl.cfg file (start part information), is there a way to: Specify tolerancing standard  (ANSI/ASME or ISO/DIN)?Specify separate Part and Assembly parameters (our start part and start assembly parameters are slightly different)? We are currently using Creo 11.0.3.0. Thank you, Matt Steed

I am not able to find the enclosure volume. option not highlighted.     

Hi all, I would like to know if someone can help me to give an direction what's the best path for me in Creo. Not fully new in 3d, was CAM programmer for over 10 years. (other program than Creo)Switched now to Additive Manufacturing, and would like to help the engineers with some questions. Only thing is i cannot design in creo yet. (did some playlists in the PTC learner, but that doesn't make me an engineer.)I would like to learn how to use the Topological designing and design for additive manufacturing. But i don't know what path is the best to walk. I cannot find the requirements if you want to follow the training : Generative Topology Optimization.I understand that the fundamentals would be helpful, but what kind of training is advice before starting with topology? Thank you,Kind regards, Danny

Hi allI'm using inheritance .prt to .prt model links.I'm getting 3 different icons shown in the model tree.  andCan someone explain the different meanings of these 3 variants?I already checked the information in Model Tree Icon List - PTC Community Thanks a lot in advancePius We are using Creo Paramterics 8.0.4.0, 

Hello,We are experiencing difficulties opening drawings directly from the model . Currently, our designers have to manually go to the server information(Windchill), navigate to the content tab, find the drawing reference, and only then open the drawing.Is there a way to use Creo JS to programmatically find the drawing reference associated with the current model in Windchill, and then automatically download and open it?Any advice or example scripts would be greatly appreciated! 

I want to understand the need for the memory allocation limits of 16 Gb for 64 bit machines?? i understand the need of having enough memory for the operating system, but now that machines with 32, 64 and even 128 Gb are comun. I am asking this because i have a model that the global matrix profile is around 100 Gb on the last pass of the MPA analysis and I am working on a machine with 128Gb of RAM