Community

I am using Mathcad Prime Release 10.0 and Datecode10.0.1.0I am trying to draw a contour plot for a publication paper. I drew the contour plot but when I export the plot to the paper after reduction to fit a double columns format paper the fonts of the contour plot axes and the legend font are too small and not readable. I tried many things and could not find a way to control the font size of the plot and legend. Need guide what to do.Here are the errors that I facedNo error message.

I was playing around with sorting and decided (yet again) that I was frustrated by some of the restrictions.  One thing led to another, and before I knew it, I was hip deep in ways to "improve" the lookup functions.    While contemplating Mathcad Zen Principles 3, 6, 7, 16, and 17, I wondered whether "unique" would be a worthwhile addition to the match/lookup modifiers.     Then my mind went blank when faced with how to handle NaNs.  In principle,  IEEE 754 NaNs are distinct.  And they would be if a standard Mathcad user had any way to distinguish between them, but they're harder to tell apart than Zathras and Zathras.  To the Mathcadder in the street, they might as well be indistinguishable, for all the good their distinctiveness does.   So, I've written two versions of unique to cater for both cases.   The question is which one would a user expect to be the default (and hence all lowercase) version?   I'v

I have attempted to connect to the Siemens TP900 OPCUA server with kepserverEx and am unable to do so, but I have no issues with the Unified Automation UaExpert application:    With keptserverEx, I follow these steps but am unable to succeed.   As it was not functioning in the certificates, I used the one I had imported Unified for OPCUASERVER, but nothing happened. I restarted the runtime and the server, but it still does not work.  

Version: Windchill 13.0   Use Case: Not sure if it's a problem between the keyboard and the seat, but my Windchill JavaDoc isn't showing the wt.vc.wip.WorkInProgressService class. Description: I'm working on some customization and using the wt.vc.wip package. The javadoc (Windchill 13.0.2) isn't showing the WorkInProgressService class page.  There's no scroll bar and it shows a random (but repeatable) few methods in what looks like the middle of a page.    I tried downloading the javadoc from PTC's website too and it behaves the same. Is this a "me" problem?   

Recently ran into this issue. The text input widget should have placeholder text (e.g. "enter employee id").This used to work fine but recently this started happening. This is showing up on old experiences that have were working previously and have not been updated.  Vuforia Studio Version 10.0.14 (10.0.14.0)

i am using Thingworx applications, which was enabled with SSO, i have totally 3 plants with different url's when the plant person login into common Url it should be redirect to particular URL of the plant person, if the user was assigned with  all plants it should shows the 3 plant link details after clicking the particular plant it should redirects to particular plant to access the application of the user. how can i done?

I’m trying to download and install the 30-day free trial of PTC Windchill Risk and Reliability (formerly Windchill Quality Solutions), but I’m encountering an issue when accessing the trial link. When I click on the download link, I receive the following message:“Document Not Found — The web page, PTC Windchill Quality Solutions Evaluation, was retired on September 30, 2025.” Could someone from the PTC team or community please assist with obtaining access to the 30-day trial?My company is evaluating this software for potential purchase and would like to test its functionality before moving forward.

Hello everyone, I would like to request information about obtaining ThingWorx trial access.I’m currently working with ThingWorx in my company environment and would like to set up my own instance for learning and personal development purposes.   Could someone please guide me on the following points? How can I request or register for a ThingWorx Developer/Trial License? Is there a cloud-hosted trial available (so I don’t need to install my own server)? If installation is required — what are the minimum system requirements and license steps? Any official PTC links or contact points would be highly appreciated. Thank you in advance for your help!

Hello, I want to show photo from Image Repository in TWX, but photo stored there is saved as base64. I was trying to get that photo via 'loadImage' service, then convert from base64 to jpg with '`data:image/jpg;base64,${response.rows[0].Content}`' and set this as src in 3dImage.  And it works in preview mode, but on mobile it doesn't.  I get an error :  'ERROR, data: ["Could not add 3D image: image_0_3"]; discarding callback; args=["image_0_3","image_0_3","data:image/jpg;base64,/9j/4AAQSkZJ...' So how can I get image from TWX and set it as 3dImage?

Hello,I am observing Windchill Homepage Blank and Empty.This is after updating the Windchill url from http to https.I have restarted Windchill and the server.Can you suggest what is the issue ? 

Hi,Can someone show the method how can i get this space in between dimension line?How to break the dimension line to allow another line go through? CREO VERSION 9.0.6

We use PTC CREO for our engineering system, I am being told that we cannot export drawing to a directory in PDF format in part number order. Is it possible? 

I purchased the software - now how to i get the down load?So far the purchase experience is not good. Too complicated.

my KepserverEX lincense is valid but OPC UA trusted Client is expired.gone to the Instance Certificates of OPC UA Configuration Manager and tried to Reissue Certificate in Client Driver.Now I am not able to see  URI in Trusted Client.How to renew Client Driver?

Hi everyone, I'm currently working with PTC Creo Web.Link and trying to determine whether it's possible to designate a parameter specifically associated with a FeatureID within an assembly context.I've reviewed the Web.Link documentation and found the method pfcScript.pwlParameterDesignationAdd(), which seems to apply only to general model parameters. However, I haven't found any reference to designating parameters that are tied directly to a FeatureID. Has anyone successfully designated a parameter linked to a specific feature within an assembly using Web.Link? If so, could you share any insights, approaches, or code examples?Any guidance would be greatly appreciated! Thanks in advance!

I am trying to install Thingworx 10 using foundation installer for postgresql.I have met all the prerequisite to install thingworx and also checked all the required configuration for postgresql required for thingworx. while installing thingworx using installer its failing in the end saying installation failed exiting now. There is not additional message provided so its kind of unknown to me why it is failing.Key points: - I am not using any ssl while going through setup process. created required db and all the configuration is done for connection.all the paths are inplacephb_conf file is updated as per requirement.after exit from installation there are no residue of process so can't track the root cause.Need help on this issue unable to install thingworx 10. 

I am using Windchill PDMLink Release 12.1 and Datecode with CPS 12.1.1.2使用“从电子表格导入”创建部件报错：注意: 受保护的操作。您没有执行该操作所需的授权。如果您认为此消息发送有误，请联系管理员。

I am using Creo Parametric Release 7.0 and Datecode7.0.8.0Our team makes models (assemblies to be precise) of chips/substrates that have a rectangular body, an overlay showing bump circles, and hundreds to thousands of solder ball models patterned over the bump circles that were imported from dwg onto the model's surface. The pattern part is currently tricky and involves a lot of file conversions and scripting outside of Creo to make a pattern table that meets the formatting required. I wanted to see if there is a way (or request this feature) to be able to pattern each solder ball over each bump circle by recognizing the pattern of bump circles. I know there is a feature recognition of patterns and ability to write/read that pattern table, but it does not recognize lines, only edges/surfaces of holes. The ability to recognize the edge of an imported circle for this feature recognition functionality would allow us to save multiple steps.

I am using Creo Parametric Release 7.0 and Datecode7.0.8.0I'm working with Creo Parametric 7.0 and preparing a model for FEM meshing in Altair SimLab. I need to divide a surface on the model to isolate a specific region for mesh control. In Creo 9.0, I know there's a "Divide Surface" feature that makes this easy, but it's not available in version 7.0.I’ve tried using the Split Surface tool, but it doesn’t allow me to sketch and limit the division to a specific area. What I need is a way to sketch a region on an existing surface and divide it so that SimLab can recognize it as a separate surface during import.In CATIA, I would use the "Sew Surface" function to achieve this, and SimLab would correctly identify the separated surface. Is there a workaround or alternative method in Creo 7.0 to achieve similar functionality?Any guidance or suggestions would be greatly appreciated.

I can't seem to create a scatter plot using a Chart Component.   Is there a way to do this?   

Is there a way to re-read Excel Data that has been imported into PTC Mathcad using READEXCEL? At the moment the only way I know how to re-read the Excel data is to delete the following and re-import:  

We are evaluating the most suitable version of ThingWorx for our current setup. At present, we are using ThingWorx 9.2.1, where multiple Things have been created and several route APIs are configured to connect Windchill through ODATAConnector.Recently, our Windchill system has been migrated to an Azure VM, and we plan to install the latest supported version of ThingWorx that is fully compatible with this environment.Could you please advise on:The recommended ThingWorx version for Azure VM integration with WindchillAny prerequisites or considerations for upgrading from 9.2.1Your guidance will help us ensure a smooth transition and maintain system stability.

I'm trying to troubleshoot some issues today and it seems like most of the support articles are missing from the KB search results.  I suspect maybe a search index issue, but not sure.  I just know it's making it really hard to find solutions.  I'm resorting to other search engines, but even those seem to be finding only a subset of what used to be there.   Simple example.  This should return dozens, if not hundreds of support articles:    

I am using Windchill PDMLink Release 12.1 and Datecode with CPS 12.1.1.2How to set value on ComboBox on onchange of the Table builder.tableActionComboBox.addJsAction("onchange", "" );Here are the errors that I facedN/A

Hello, I have a ME10 macro that selects all geometries from a view and returns the pointer and geometry properties as a list to LISP.The pointer corresponds to the return value of the sd-get-annotator-reference function.To continue working with the elements, I need the sel_items for the pointers. But I can't find an inverse function for sd-get-annotator-reference.So far I have implemented this by using get_selection in LISP to get all sel_items and building a new list in which the pointers are added using sd-get-annotator-reference.I then use this list to add the sel_items to the list returned by ME10. However, the last process is quite slow.Does anyone have an idea how to do this efficiently?BR