Creo+ and Creo Parametric

I find this comportement very strange but i know that it's possible to drive a dimension with a parameter in inheritance:1-PART A with dimension driven by parameter2- PART B with PART A in inheritance and with variable parameter and relation but with error with = or ==And with == i obtain this errorBut when i put this parameter A in family table creo calculate the value with good value in each instance but with relation error  Why creo permitte to do this if not possible??Many users test naturally to drive this...The other metod is to drive a dimension via a inheritance part with a parameterThank you very much for your reply 

Hi PTC,   I have trouble to open my creo 3.0 recently after my computer updated.  Every time I click to open to software the warning window pops up with message:     "License request failed for feature   Requesting PROE_Essentialsl …   7788@bsrpc127:(-96) License server machine is down or not responding."   Anyone has the same issue?  How to fix this?  Thank you so much.   Sincerely regards,  

I am using Creo Parametric Release 5.0 and Datecode5.0.5.0Random exitTracebacks in attached documentHere are the errors that I facedRandom exit with Tracebacks

Hello, I have a hexagonal lattice feature which intersects a flat surface at 90` I can add the vertical rounds to the lattice itself via the feature, but is there a quicker way to add rounds to the edge that intersects the lattice and flat surface? rather than selecting each of the bottom edge of each of the hexagons? There is approx 150 Cells in the lattice and its quite tiresome to add them all in. Other CAD platforms have intersection selection control, but i cant seem to find anything in creo, even using closed/partial loop or selecting edges by filter? Any help will be appreciated.

3D Copilot question.For instance during creating an extrusion: I can draw the handle for the depth and it will change by 1mm steps - where can I change the setting to smaller or bigger values/steps than this 1mm? Additional question - is there an keyboard shortcut to disable the defined grid during drawing the handle?

wf4Simple sounding question... i have a surface with a hole in it that I want to fill in. Boundary blend doesn't seem to work. How do I go about filling in the hole with a surface?

I am part of a four-person company, two of whom use Creo/PTC without a PDM/PLM.  We use folders on OneDrive for development and that works really well. We include the rev in the file name and always rev the entire assembly using File > Save As to a new folder. It’s really nimble for development. Once we release for tooling, we have been using Grab CAD workbench. It works oookay but, Grab CAD is discontinuing Workbench, so we are looking for a new solution. I would really like to do something more similar to how we handle development, but am stuck on how to handle the drawings. The workflow I am imagining is –Development starts at V1, stops at, say, V50All parts released at Rev A (with Rev A in the file name)File > Save As (to a new folder) > change all file names to Rev AWe want to make a changeOpen Rev AFile > Save As (to a new folder) > change all file names to V51Make the changesFile > Save As (to another new folder) > change names of parts t

I was informed by the guy that I trained to take over my job, that in Windows 11, the ability to create custom toolbars has been removed. Since I’m still working part time, I continue to be interested in the system setup and making sure things continue to work for the end users. I saw some rumors on the web that they removed this because of security concerns. I don’t understand what could be of concern, and why they didn’t just fix whatever concerns there were. I think it’s important to describe how we use custom Task manager toolbars in windows to standardize the environment for all the users. I’ll use our older toolbar for Creo 4 as an example because it’s a bit more streamlined, than the Creo 8 toolbar. To create a toolbar you right click on the task bar and pick Toolbars, New toolbar…  It brings up a explorer window and ask you to pick a folder. The name of the folder will become the name of the toolbar.  The content of that folder is just shortcuts an

I am using Creo Parametric Release 7.0 and Datecode7.0.9.0I cannot change the color of my sketch lines. The User defined options are greyed out.

I am using Creo Parametric Release 8.0 and Datecode 8.0.5.0Creo8 application is running on a virtual machine. The VM host is equipped with a NVIDIA graphics card (GRID T4-4Q). When running Creo on this VM, the user periodically notices the Creo main window and the displayed model getting blurry. This lasts for a split second only each time, nevertheless it is very annoying for the user. Only this blur effect happens, no display freeze or any other similar graphics issue. Other 3D applications (e.g. CATIA) do not show this behaviour. Are there any specific settings for this NVIDIA graphics adapter (GRID T4-4Q) which can be applied on the system settings panel of the graphics adapter?

My Dell Precision workstation has a Quadro RTX5000 .... It's amazing to use.  I spoke to an Industrial designer friend at Dell before purchasing this laptop and he said never skimp on a video card so I didnt.     3840 resolution on a laptop!   So I was thinking and after using it for the past few years of a few enhancements that might be noted for future releases of Creo.   I thought I would bounce just one by the folks on the forum.  So many probably don't know that if you draw a line in sketcher that you can change the linetype *ptc calls incorrectly a 'linefont' .... One can also change color.  I also want to also change the line thickness and have a few selections or even be able to increment thickness of lines.  Maybe a developer would consider an option to have the line weight pull thru surfaces or solids as if the surface or solid had a slider for opacity.   Thoughts? One Creo 9.0 question:    I

I am using Creo Parametric Release 5.0 and Datecode5.0.5.0I cannot save the file (model, drawing) or upload it to the serverHere are the errors that I facedServer error: Cannot retrieve family table neutral data

hello friends how to we change the primary axis word form C to B in the creo post-processor??  thanks asif  

We are trying to send the project to some of our suppliers so that they can manufacture it based on 3D. Currently it receives the models in the STP extension, but when receiving it, it complains about surfaces that are divided. Below is how the part looks in CREO. Below is how the supplier receives the part after importing it, it uses Solidworks. the files are exported as shown below:  Is this a configuration of CREO itself or is there a way to remove it?

I am using Creo Parametric Release 4.0We are having issues creating a new user and was wondering if we can get some assistance. We do not have an admin account available in Creo but we do have admin access to the windchill server. I was wondering if we were missing something with adding a user and can add it through the windchill server. Or is there a way to add a user in the application itself

We have parts that were last saved in Wildfire 5, about 11 years ago. When we open then today in Creo 4 and make a change to the sketch or even a Save-As, Creo 4 will crash.  We have cleared all workspaces for the user, and deleted the cache files from disk. We tried the following config.pro settings: enable_opengl_fbo no enable_opengl_vbo no enable_opengl_shader no graphics win32_gdi Neither one helped, the Save-As on an existing part will crash Creo. The weird thing is that it is only 1 user. I can open the same files on my computer and do a Save-as with no issues. It is a newer Dell workstation that IT has rebuilt with Windows 10 and I am guessing newer graphics drivers. The user windows profile is created new the first time a user logs onto a workstation, so that is not it. But with it still crashing with the graphics config.pro, that should not matter. Has anyone seen this where it is just one user having issues.

Hi Everyone.I am on Creo 8, and have an assembly with family table.I have created a Pro distributed batch file to export all the family table assemblies to STP format.Is there a way to get the batch file to read step export profile settings I have set in my config.pro  What I am trying to have is the STP models to retain the colour schemes I have used in the Creo model.I can achieve this on an individual family table assembly export model, by save a copy to STP file, and with the selection of the options tab brings up the "step export profile settings" dialog box. By changing the Application protocol to "ap214_is", and saving the profile. This exports the creo model to STP keeping the colour scheme.   I want to be able to batch export to STP using this ap214_is protocol..Any suggestions on how to do this, would be greatly appreciated.

I am using Creo Parametric Release 8.0 and Datecode8.0.2.0   Please contact us if you have any questions regarding the document. How to solve cs349558 document? Translated the below sentence to English using google translate. Translated on 20-12-2022 at 11:56am IST by vnamboodheri:- 문서중에 문의사항이 있어서 접수합니다. cs349558 문서의 해결방법은 어떻게 하나요?

I am using Creo Parametric Release 6.0 and Datecode6.0.5.1Import image on sketch in order to copy a new profile ( sketch) and create a new geometry

Creo Toolkit registry file xxx/creotk.dat : application 'xxx' failed to start; see trailfile for details. I am receiving this error when I am trying to launch some OTK dll script in Creo 9. I am using Object Toolkit C++ on Creo 9.0.1.0. I am updating OTK scripts that all worked successfully on Creo 5. However, now, after updating everything, I can get the DLL's to all compile successfully, but after unlocking the scripts and registering them in the Registry file, only some work while the others receive the above error. Is there another location where the error details appear so I can do some more trouble shooting? Any and all help would be greatly appreciated. Thanks,Mark Hardebeck

is there any way to show zero place tolerance in the tolerance display? thanks,Rich

I fully understand that Creo 5 is NOT and never will be supported for using with windows 11. I have a lot of reference data stored with a fixed licence for Creo 5, and I only occasionally need to view and maybe export some data from the archieve. Can anybody indicate if Creo 5.0 will at least load & function on a Windows 11 operating system, or do I need to ensure I maintain a Windows 10 work station for as long as possible.?

Hello Creo Community members, I am currently working on  parametric model. This model changes according to relations and thus, we can create multiple variants. Now, I need to solve problems with purple (not regenerated) dimensions which appear on drawing when I change between different variants. I used drawing program to create combinate states to control purple linear dimensions. But this is not working for ordinate dimensions, which I need to use.I used all model dimension in the drawing that I could to avoid regenerations issues...Is there any way to remove all the purple dimensions at the same time, so that the model user doesn't waste time removing them one by one ?Thanks in advance for your contributionPeter

We are using Creo 7.0.1.0 and our custom CREO files like config.pro, .DTL, Start part/asm, Drawing templates are kept at OneDrive location.All users having read access to this location and fetching files from here. (used environment variables)In CONFIG the font directory is set to “C:\Windows\Fonts” and in DTL “default_annotation_font” is set to “romans__.ttf”.This configuration is working good for all existing users and we were adding new users as they join and also working as expected.but recently few new users (not all new) are facing issue in setting up the default font to “romans__.ttf”.when these users open existing drawing or create new drawing the font is not our standard font and shows font name “AS IS”We have tried setting up the font from drawing detail option where value present was “font.ndx” we applied “romans__.ttf”, after applying font when we reopen the drawing option the font is again set to “font.ndx”.Don’t know why this is happening, is there new patch applied or so

I'm using Creo 5 and can't figure out how to mirror multiple components either.  I can't believe this isn't available!?  Does no one using creo make symmetric assemblies?  Is it available in Creo 8?   Well, I'm off to make my 11 individual mirror features about the same plane.