Creo+ and Creo Parametric

I am using Creo Parametric Release 7.0 and Datecode7.0.4.0I want to use PTC_WM_CREATED_ON in the condition.mcc file. When trying to use >= it does not check the file properly. The following syntax is used (PTC_WM_CREATED_ON GTE 20200603). The string value shown in PTC_WM_CREATED_ON is not recognized.

Hello all I´m a big fan of using Snapshots with contraints values to describe sequences of mechanical designs.....but I hope you will help me how update the Snapshot Contraints values in an easier way. This is the way I do it:1) Create one snapshot with all the contraints needed with the correct values for that sequence-step.2) Copy above snapshot and correct the contraints values for this sequence-step3) Etc The problem I find is that it´s very difficult to update, for example when I need to add a constraint I must click on every snapshot and update them, also it´s difficult to compare the snapshots to debug when something goes wrong.  The attached pdf shows a simplified ASM with some notes to explain what I mean 🙂 BR Jan Olsson

Hello, I have drawing with some erased views.When I delete a sheet which content a view erased, the erase view "appear" on all other sheets.Is there a method to find and delete all views of a sheet or search for erased views in a sheet ?Or an option to delete erased views with the sheet ? Thanks 

Hi All, I'm using Creo 8.0.Hopefully somebody here can help me out since I haven't been able to find a solution on the internet yet.Quite often I have to design tubes which will be cut from sheetmetal and then rolled into their round shape. Therfor all cuts need to be normal to the sheetmetal plate. So far so good. However when I need to make a simple angular cut at the end of the tube things get frustrating pretty soon.When you look at attached cross section you will see the upper end is exceeding the cutting line. Here I've used normal to driving surface. When I use normal to offset surface the upper end is fine but the lower end is exceeding. I do understand what it is doing so this still makes sense to me. Therefor I would expect "normal to both surfaces" should do the trick but this feature doesn't work at all. This is frustrating cause a simple cut like this can't be done in one feature but always requires more features. Am I missing something here or is it just a

We just upgraded to Creo 7.0.10.0 from Creo 4.0 M150.  Does anyone know how to turn off the command information text in the upper right corner of the command ribbon?  This is not a big deal, just something that annoys me. 

Hello  I want to select inner surfaces of a solid cube.I want to do it for Simulate purpose.But i should be able to use it in  part modeling window

Is it possible to set Use standard hole profile as drill hole profile button selected by default while creating simple hole

Hi Guys,   In Creo Parametric 7.0 I’m trying to replace an assembly in a simplified rep by use of a family table instance.I’m having an assembly with a pneumatic parallel gripper (some kind of cylinder) in, which is “driving” some other parts:   This gripper has a family table with some instances (different positions of the jaws):     Now I like to replace this gripper in a Simplyfied Representation in the higher assembly.I like to do that with the “Substitude selected models by family table”:         This works fine for the gripper. But the parts (jaws and bolts) which are driven by the gripper aren’t following the jaws of the gripper:   Does anybody know how to solve this?

Hello, I wanted to see if anyone else has dealt with this issue before. The exploded-lines that I create for my exploded drawing views are constantly disappearing or should I say, getting deleted. I have no clue why this is happening. I'm very meticulous with saving my views along with my drawing files too. Yet often when I close the file and open it back up again, the lines are gone and nowhere to be found in the model tree. This is beyond frustrating. I just wanted to ask if anyone else has these issues too.

Hi, I have set following settings:Model Properties /Detail option  default_annotation_font arialn.ttf  symbol_font ISOsame settings in drawing properties All symbol come in arialn.ttf but only the diameter symbol (by pressing button add diameter symbol to dimension) stays in old legacy mode (see picture - only lines no ttf font)Strange thing is  - when i manually add the diamter symbol as prefix it is correct (see second picture)  How can I fix this?    

I am using Creo Parametric Release 8.0 and Datecode8.0.4.0Is it possible to change the amount of the component table, multiplying it by 2, without inserting 2 parts in the model tree?

We are using creo parametric in french but we are creating drawings in english.When a drawing section is created the section label is in french.Is it possible to force it to english "section" in some way?Basically today we need to edit the note and change it manually. If we can save some time it is good. I know one solution is to set it up in english language but we want to keep all the menus in french for people who are not too confident. 

Hi! I have problem in my creo version 8. I cannot add H7 tolerances do some drawings. For some I can, for others I just can't see the option to do it. I tried to change settings of models, add tables with Hole tolerances etc. Nothing seems to work. Does anyone have any ideas? I am attaching 2 examples - one is a drawing where it works, other where it does not.

Move to: https://community.ptc.com/t5/3D-Part-Assembly-Design/bd-p/partassemblydesignLink to post: (Simplified representation -> Substitude selected models by family table) by @GD_10528138 https://community.ptc.com/t5/PTC-Community-Feedback/Simplified-representation-gt-Substitude-selected-models-by/m-p/844447#M1843 Hi Guys,   In Creo Parametric 7.0 I’m trying to replace an assembly in a simplified rep by use of a family table instance. I’m having an assembly with a pneumatic parallel gripper (some kind of cylinder) in, which is “driving” some other parts:   This gripper has a family table with some instances (different positions of the jaws):     Now I like to replace this gripper in a Simplyfied Representation in the higher assembly. I like to do that with the “Substitude selected models by family table”:         This works fine for the gripper. But the parts (jaws and bolts) which are driven by the gripper aren’t following the jaws of the g

The xtop.exe says that thoes libraries are missing after windows updates, and I'm currently using windows 11.   xalancmt.dll xercescmt.dll btkunzipmt.dll btkzlibmt.dll   Don't know the folder adress of these and some of thems are not able to download by the search.

Hello, Are there any configs that auto suppress failed parts on regeneration?  I am opening several parts for research that I need to regenerate and the failure diagnostics really slow me down.  Is there a way to suppress this function? Running PTC Creo 4.0 Thanks for the help!

While working on drawing, "license lost" message along with "offline mode" message (see image). I cannot click anything.  "offline mode" message appears but not clickable. I cannot bring "license lost" message to the foreground of the screen. Drawing is saved but it would take 2 hours to re-open. Solution? 

Hi, I need to write a code to delete some components from an assembly using Excel. I'm new in VBA and I have found some examples but I will need some help. Thanks.

Using Creo 7.0.5.0 Q: How can I find the Body ID's in an assembly? Reason:Error Diagnostics for Analysis/Assembly FailureAll position constraints can't be simultaneously satisfied. The following position constraints can't be satisfied:1) The following kinematic loop can't be closed: Ground - body38 - Ground. The bodies in each part is called Body1 (by default, I don't model multibody parts), making this information rather pointless. Can't find any model tree column that tells this information either.

Borrow license for 179 days.Creo cannot be used after Windows Update. -96 Cannot connect to license server

I need to hide sketches shown in drawing views (sketches not quilts).I do hide it every time I open the drawing file, so I need a permanent solution.

Can someone please help me with drawings. Im trying to add 4 different part models to a drawing. When I try to label them with &model_name they all keep the name thats preselected on the bottom of the drawing(I attached image). Can someone please help me fix this issue? 

Hi all, By using "&weldasm.totallength" we can show the total weld length in any table on DRW. But we need to use similar code in ASM parameters. I tried to use "WELD_LENGTH" parameter of each future in the releation. But when I try to use the future parameter in releation it gives as "WELD_LENGTH:FID_702:3" specifically with FID. I can't use because the number of weld future in each file will be different and the location of weld future will be different. If I successed to assign total weld lenght to any parameters I will sign as designated and will send to Windchill. Then I will prapare a query builder report which inludes total weld length of CAD Documents.Do you have any idea. It can also be a solution with mapkey or ModelCheck ... Best regards,

I am working on a harness drawing and on my table for pin to pin connections, I have parameters "&harn.run.cond.from.pin.name" & "&harn.run.cond.to.pin.name". At the moment these values are not populated in the table.1) Where can I access the values corresponding to these parameters?2) How do I edit these values?All I need for my table is to view the from and to connector pins.(Using Creo 8.0.4.0) 

Hi,today I started a new 2D Exploded view for our company product;I noticed that for some component Creo starts group and put them under a single Balloon. That's not right, someone knows how to fx it?In the attached image a screenshot of my issue.The second component is a motor and is an assembly, it put 2 balloon. Thanks in advance