Creo+ and Creo Parametric

I am using Creo Parametric - Release 6.0 (connected) Release 6.0 and Datecode6.0.5.1I need to open a modelfamily with pfcls in Powershell. Currently I'm only able to open the main model without the family.Can anyone help?

I am using Creo Parametric Release 4.0 and DatecodeM130使用VPN时，Creo无法连接对应的License.提示7788@xxxx （-9）Invalid host.(license服务器所在电脑已开放7788端口)Here are the errors that I faced提示7788@xxxx （-9）Invalid host   When using VPN, Creo cannot connect to the corresponding license. It prompts 7788@xxxx (-9) Invalid host. (The computer where the license server is located has opened port 7788) Here are the errors that I facedPrompt 7788@xxxx (-9) Invalid host   Translated by Iuliana Lazar with Google Translate on 17 Oct 2022

The width/height handling for tables in a drawing is extremely stiff and slow.  Is it possible to make the table rows, columns and/or cells to grow dynamically based on the amount of content (eg text)? This would for example be handy for description and material columns in a BOM-table, the description column in a revision table or unassigned text boxes.  If not, I'll post it as an idea... 🙂 A related idea regarding dynamic text size is already posted, but I don't see it as a good solution as the text would become unreadable once it's below a certain size:https://community.ptc.com/t5/Creo-Parametric-Ideas/Dynamic-Font-Height-option/idi-p/813418 Even though this video is meant as a help/guide/tutorial, it also shows the heavy amount of clicking and trial and error before the table actually get the necessary size for the text within it:https://www.youtube.com/watch?v=Tn2X8_KmFSsAnd in case the text is changed, you have to redo it all again...

Hello everyone, I would like to simulate the stress vs. load angle in Creo. Instead of creating individual load set for every 20 degree, I would like to see if there is a way to define the load with the parameter relation, and make Creo run the analysis for with a new load for every 20 degree.  The load magnitude will stay the same, but the direction will change. Thank you so much!

Hi,New Creo user here and I have searched the forum already for this issue. Every time I open a model, Part or assembly, it displays the style as 'Shaded'I have to change it every time to 'Shaded with Edges'.Is there any setting or option to keep the model 'Shaded with Edges''? Regards,~Tushar 

Creo 4.0 There are a couple checks that can be setup to point to another file to compare data. I've had success  pointing to files on a share drive. Since we are connected to Windchill, I would prefer to point directly to our start parts/dtl files stored there. With the current setup we have to maintain multiple sets of files. I've tried pointing to our wtpub directory just like we do for config files and that didn't work. Anyone know if there is a particular syntax or way to point to Windchill for these comparison files? Settings I'd like to point to a wtpub directory. (Let me know if I'm missing any other good ones?) STD_DTL_SETUPTEMPLATE_LAYERSTEMPLATE_DTM_PLANESI did also run into a bit of a snag where the reapply standard doesn't seem to work for my test user account. Though I fear this is a permission issue for the share drive and not Modelcheck related. Though if anyone has experience here, would also be appreciated.

I am using Creo Parametric Release 4.0 and DatecodeM090When you change the parameters of the 3D model, normallyThe drawing parameters are also changed, but the changes are no longer reflected.As an example, I wrote "TEST" in PART_NANE in the 3D model,The "MODEL 50 ID INPUT" previously described in the 3D model parameters remains.The 3D reference has not changed, but once again the 3D parameterIs it possible to reflect the contents in the drawing?

Hi. I make a section in my part and i want show in drawing. But creo showing a cut line in section view. Is there an option to disable their display?  

Hello, I'm using parametric creo 2.0. I want to make a thread hole in my part. I need to make an M36 x 1 thread, but I can't standard creo because it's a m36 x 4 choice.  is it possible to add a new thread hole to the drop-down list?

Hi, I'm on Creo Parametric 8.0.4.0 and I would like to know If it's possible to set by default "fullscreen". I already have "open_window_maximized yes" (config.pro) which make the default window like this :And "fullscreen" would be like this :Thanks.

All, I am looking to recreate a part in Creo from another CAD tool. I don't use sweeps too much. I would like 1 sketch to sweep around - end points connected respectively to 2 trajectories. The sketch is basically 2 radii with a wall thickness being swept around. It is a plastic part. What is the best tool for doing this? Swept Blend? Blend? Other? Thanks, WayneF 

Hi All, I would like to run specific mapkeys via Weblink in Creo 9, but unfortunately nothing seems to work. Here is an example from my code: function WlModelRunMacro (){var MacroString= "~ Command `ProCmdModelNew`";mGlob = pfcCreate("MpfcCOMGlobal");var oSession = mGlob.GetProESession();oSession.RunMacro(MacroString);} I have enabled web_enable_javascript option in my config file. If you could run macros in Creo through weblink, could you please help me with a right syntax? Thank you for your help,Richard Lukacs

In our drawings, we have some revision tables hand filled on each sheet . When a new version is made, we need to update each table on each sheet, whom is time consuming.I would like to set up parameters and used them into a table so that every modification on a sheet would be passed on others. We’ve got 7 parameters by revision, and need at least 5 or 6 revisions, so lots of parameters to set up. Is there a way to define these parameters directly into the frm format (from the parameters windows) ? Trying this, parameters are not recovered when a new drawing using this format is made.I wouldn’t like to insert these parameters into prt or asm files not to overload existing parameters (one solution could be to use a user defined parameter filter),I thought to use a family table and a repeat region (one instance per revision), but this could also be problematic for parts and assembly whom already have a family table,We don’t use Windchill nor any PDM. Do some of you have any bril

I am using Creo Simulate Release 7.0 and Datecode7.0.4.0In a modal analysis, is it possible to connect 2 cylindrical shaped bodies but allow rotation around the cylindrical axis. This would be for an unconstrained analysis with rigid mode search.

I am using Creo Parametric Release 4.0 and DatecodeM120Hi,We are working on a Creo Toolkit application to traverse structure of a Creo Assembly that contains ~650 objects at different levels in which there are Family table instances associated with ~200 Family tables using Creo 4 or later versions. The total number of instances in these Family tables is about ~5600. We are using the Creo/Toolkit (Pro/Toolkit) APIs to traverse through the structure to retrieve the details of all objects available in the structure including all instances of all Family tables associated with this assembly structure. Do you have any benchmark timing for traversing this kind of a Creo assembly using Creo/Toolkit (Pro/Toolkit) APIs to retrieve information about ~6000 objects? If so, could you please share the information of the appropriate APIs to be used for traversing the Creo assembly structure and also to retrieve the details of all instances in all Family tables? Also, we would like to have a sample pro

I am using Creo Parametric Release 4.0 and DatecodeM110Having issue to find several number of roundoff values in drawing annotation for huge size drawing sheets.

(Using Creo 7.0.5) What would be the easiest and most clever way to annotate Burr & Break Edge Tolerance in a drawing? I have these 20+ year old drawings that currently is being re-drawn from newly made 3D-models. In the  old ones it's been annotated like this: A more common (modern?) way seems to be using a "corner" symbol followed by the tolerance. The symbol is quite similar to the straight angle symbol found in Unicode: ∟The technical fonts in Creo (font, isofont, iso30985font etc) doesn't include this symbol, so it can't be included in the annotation. My current solution is adding a separate textframe containing only this symbol, putting it in front of the tolerance:  It "works", but I hope there is a better way?

I want to analyze a bolt with preload to find the equivalent plastic strain. but when I given the preload and then trying to give the nonlinear analysis system saying as below image.How to do the nonlinear bolt analysis with preload?

Hello,I created an new Format file (.frm) and added there some parameters-links (via Note and &XXXX) with I want to automatically updated from the Main model parameters.But when I load this Format to my drawing of the model the parameters do not update.Anyone can give me a hint how to update the parameter-links in the format file according the 3D model parameters?

I am using Creo Parametric Release 7.0 and Datecode7.0.3.0Good Morning dear,I'm tryng to use de UDF tool, in assemble mode, to customize a project and the follow message shows:"You have not checked out the license option. Please click "File->Options->Licensing" and choose required option from "Refresh license list".In the part mode I can acess the tool.I'm using a locked license.Here are the errors that I faced"You have not checked out the license option. Please click "File->Options->Licensing" and choose required option from "Refresh license list".

Hello, What is the Creo license model in the case of cloud deployment? We would like to test deploying Creo on Azure VD to be streamed through the browser. Is there a way to configure Azure VD Creo application in order to use the license servers we already have? Currently they are used by users with local copy of Creo. Can location specific licenses be used, do we need to use global ones or is there another type of license required?

I am using Creo Parametric Release 6.0 and Datecode6.0.6.0Here is a problem about creo large assembly efficiency:I use weblink to assemble the model automatically. However, while the assembly part amount is more than 500, it will be very slow.The installation of single part will be slower and slower as the assembly get larger.eg:first 100 parts : 1minsecond 100 parts : 1min 40 sec...final 100 parts : 5 minIs there any way to avoid this?

Hello, So I went to install the license server for Creo 7 on my license server and it does not want to use the NIC mac address that the current license server is using on the same machine.  Has anyone else seen this and know why it is doing this or how to get around it?  When I do ipconfig /all, it shows 4 NICs and the one it is picking is the last one in the list. **Update*** I have two NICs that are teamed.  The current license uses the teamed NIC MAC.  I have disabled the 4th NIC which is something Dell has for the SAN but we have found unnecessary.  But now the new license server wants one of the NICs and not the teamed NIC.  Any ideas? Thank you, Brian

Hello, We are setting up repeat region BOM tables. Our standard is not to put a "1" on a balloon if the qty is only 1 each. Is there a way not do display a quantity of 1 and still keep the tie to the table?  

I created numerous tapped hole patterns and added GD & T call out with no problem. On this hole pattern I cannot add the GD & T call out,. It is asking for a dimension reference. I have tried picking the dimension, but will not work. e other patterns did not require me to pick a dimension? What am i doing wrong