Creo+ and Creo Parametric

I am using Creo Parametric Release 7.0 and Datecode7.0.3.0Hi,I am having an issue with the ptcdbatch.bat: some of the parts that get created using the batch script are not added to the PCBA when I import the emn and emp files.I don't have that issue if I manually import the step files into Creo.Note: that I am using the same config.pro file in both cases.

 I was trying to create an isolated small surface "region" in a big surface like the small rectangular surface patch on the above enclosure. I am going to export its step file into ANSYS then mesh the small patch and name it as "leak inlet", so that it can be used in CFD simulation as an inlet BC. However, there is no document or instructions on how to do it. My real "enclosure" is very complicated. I failed to export its step file into SpaceClaimer or ModelDesigner, therefore "imprint" is not available. If the small surface region can be created in CREO (just like in Simulate) then export to ANSYS mesh tool, everything becomes easy. Is there anyway to create this small surface region in CREO? Thanks.

Hi all, Attached is an image of the mass properties window that is accessed via File > Prepare > Model Properties > Mass Properties. My mass is showing incorrectly here, as well as in the drawing, (parameter PRO_MP_MASS). Essentially, PRO_MP_MASS is not updating at all. I am calculating mass properties by regenerating (ctrl + g), and pressing calculate in the aforementioned window. In the green box, it can be seen that the Mass parameter is not necessarily calculated, but looks like it is an input as it is not greyed out like the others. In my other assemblies, this Mass parameter IS greyed out, but it is not here, for some reason. Yes, I have 'mass_property_calculate automatic' in my config.pro file. Yes, all of the subcomponents have materials specified, and have been regenerated/mass properties calculated, too. Yes, I looked on the forum for similar situations, to no avail. Any ideas for fixing this? Thank you!

Hello my friends, I need your generous help again.This is not exactly the toolkit issue, but of the possibilities of Creo Parametric itself. If you think that is the wrong place to rise it, please refer me to the right forum.So: I need to export out an .STL file from model. I use toolkit function ProIntfSliceFileWithOptionsMdlnameExport()which takes ProModel handle as parameter. It works perfectly fine, but I'm required to perform an export on several models at once. My question is how do I combine several models in one? I'm looking to the possibility of using Solid Bodies. Is this a right direction or you would recommend me any other approach?There is a one important thing I forgot to mention - all models of this are of the same geometry and belong to the same part or assembly. Thanks and BR-

Creo 7.09 Win 11 Pro   When placing UDF features the placement UI window is not accessible after selecting the first placement reference. When operating correctly, the user should be able to switch focus between the target model window and the UDF placement window to map references. I am able to place a UDF successfully but not with the benefit of using the UDF placement UI window.   The same issue occurs when using copy paste special of features between models. The placement window is not accessible after mapping a reference.   Has anyone else see this happen?

I am modeling an electronics chassis with circuit cards in it.  The material properties of the PCBs are defined in the model and they are showing as solid components in the  simulation domains list.  The fluid domain appears to appropriately have "negative space" where the PCBs are.  However, when I run the model and I try to investigate the surface temperatures of the PCBs by selecting them in "boundary conditions", selecting "yes" for surfaces and "Temperature" for a variable, nothing shows up.  When I do a cut plane through the chassis, the heat dissipation from the PCBs is obviously changing the air temperature, but I can't see the PCBs themselves   I'm a relatively new user so I suspect there's something basic I'm missing.  I've reviewed the tutorials and online documentation and it's not obvious to me what's going on.    @tmoser you were very helpful yesterday - much appreciated!  If you have any insight t

I have an assembly that for the life of me I can't figure out what the issue is.  For starters I am using Creo 6 and I have an assembly that contains 3 parts in it, with 2 of the parts being assembled using mechanism constraints.  The two assembled parts are completely independent of each other where one is a ball connection and the other part is using a slot and planar connection.  When I try to drag either of the components with both parts unsurpassed I get the error message that "the mechanism could not be assembled since some mechanism constrains have not been satisfied".  However if I suppress either one of the two components I can drag either one with no error messages.  Again both components are completely independent of each other so I can't figure out why I am getting this message that the constraints have not been satisfied.  I've attached the files for anyone that would like to  I would greatly appreciate anyone that can help me unders

I have a cylindrical, rubber isolator that is essentially bonded between an inner and outer steel tube in a larger assembly.   I keep getting a warning about the large difference in modulus values and my analysis keeps crashing.   Is it possible to bond different materials together in an analysis?

Hello We have a real problem at the moment. We want to update our system to CREO9 and our service provider needs a complete license package. However, my previous access account seems to have lost some rights and is incorrectly assigned. The account is no longer allowed to download any CREO versions and in the requested license package only the Intralink versions are included the complete rest CREO / Windchill etc. is missing!!! However, we are not setting up a new server.eNow I wanted to create a new account with my e-mail address, but (removed email for Privacy) is not possible, your database says the e-mail address already exists. But I am not allowed to reset the password either, because there is an error message "Wrong format" ??? Is a bit suboptimal right now.

I am using Creo Parametric - Release 4.0 (connected) Release 4.0 and DatecodeM010 In the drawing environment, when calling ProSectionEntityAdd to create text, select the font, the fonts in the list, except font and font3d can be successfully created, other font types return the error PRO_TK_LINE_TOO_LONG. Contact: Zheng Xiaofang, Contact: 15150591574, zhxf@zcset.com   Translated by vnamboodheri from Chinese to English on 21st September 2022 at 8:12am IST------------------------------------------------ 草绘环境，调用ProSectionEntityAdd创建文本时，选择字体，列表中的字体，除了font和font3d能创建成功外，其他的字体类型，都返回错误PRO_TK_LINE_TOO_LONG。联系人：郑小芳，联系方式：15150591574，zhxf@zcset.com

shape surface selection filter from flexible modelling will not work for normal editing features. it may be good idea to make a shape surface selection filter for normal editing features (or club both filters).

I am using Creo Parametric Release 6.0 and Datecode6.0.3.0We have recently switched from Creo 3.0 to Creo 6.0. In Creo 3.0, we have created models using Merge/Inheritance feature and checked into windchill. We were able to open the same models without having any issues. But in Creo 6.0, when we tried to open the models, it is losing the references for merge component.Here are the errors that I facedMerge reference part lost. Select the same part from different location.

Can someone help? I'm trying to create a pen table and would like to set Manufacturing volumes and Quilts to Pen 8 and have those lines print as gray. What would the pen table look like for that option? I'm printing to PDF.Right now I can only get those to print as their system color.Thanks.

Hello,My central axes looks like this in Creo:And that is also how i want it to look like.But when i print it as a pdf file it looks like this in the pdf version: Same goes for cosmetic thread lines: No idea why that changed but is there an option to change it? GreetingsSpedex

Hi – I hopefully have a quick Creo analysis Flow question.  I have an assembly and in Flow it’s not letting me change the material properties of the solid domains. I go to each component and select the material from the pulldown menu and hit OK.  I then click on materials to see if my change took and it still displays "none" for material In an older simpler model I was able to change materials, now I can’t .  How can I fix this?  I tick the "force update" box and that doesn’t help Thanks! Mark 

I am using Creo Parametric Release 4.0 and DatecodeM020Need assistance with a technician not instructions sent to assist to upgrade to the latest build.

Hello, i have several parts that have locked paramters like this:I cannot unlock this parameter and therefore I cannot change the value of it.In the BOM in the drawing this parameter is linked. Is there a way to either unlock it or to overwrite this value in the BOM-table with a manual entry?GreetingsSpedex

Is there a way to convert a MTR (Mold Analysis Material file)  into a MTZ file? A custom material can only be imported as MTZ file. Thanks in advance for your help! CheerEOMarco 

Refer to the above two screenshots, they are the same stress profile picture, thus should have the same color presentation. However, we can't present the stress result at Top View, which is inconsistent with the Legend. We know the problem is the "reflection", however, we don't know how to switch off the "reflection". Does anyone know how? Thanks. 

Does anyone know if there is a config.pro param that can be set to Show Table by default when Replacing a Component by Family Table in an asm?

I am using Creo Parametric - Release 7.0 (connected) Release 7.0 and Datecode7.0.5.0When you create a custom filter in the Parameters of a model (using the "Filter Parameters" dialog), I can find no way to save the custom filters. Apparently, the custom filters are not saved when the model is saved, because when I close and then open the model later, all the custom filters in the Parameters are gone. The "Filter Parameters" dialog has no "Save" button. I have searched the PTC knowledge base as well as Google, and I can find no instructions on how to save custom filters in Parameters.Here are the errors that I facedThere are no error messages associated with this inquiry. I just want to save my custom filters in Parameters! If Creo is incapable of saving custom filters in Parameters, then this is something that definitely needs added to Creo.

I am using Creo Parametric - Release 5.0 (connected) Release 5.0 and Datecode5.0.1.0I have a dimension As IpfcBaseDimension. I want to show() it but I need of "_instructions as Object" and I have no idea of what this object is. Can you help me?

I am using Creo Parametric - Release 4.0 (connected) Release 4.0 and DatecodeM010草绘环境，调用ProSectionEntityAdd创建文本时，选择字体，列表中的字体，除了font和font3d能创建成功外，其他的字体类型，都返回错误PRO_TK_LINE_TOO_LONG。联系人：郑小芳，   I am using Creo Parametric - Release 4.0 (connected) Release 4.0 and DatecodeM010 In the sketching environment, when calling ProSectionEntityAdd to create text, select the font, the fonts in the list, except font and font3d can be successfully created, other font types return the error PRO_TK_LINE_TOO_LONG.   Translated by Iuliana Lazar with google translate on 20 sept 2022  

I am using Creo Parametric Release 6.0 and Datecode6.0.0.01. In MBD, while publishing only selected view, in PVZ file, all view getting published.2. In MBD, Before publishing, sketch is hidden but in PVZ all sketch are visible.3. In MBD, Location and size of dimension get changed after publishing in PVZ.

How to run simulation using higher number of cores?