Creo+ and Creo Parametric

Hello, So I have been trying to model a simple cam folower in mechanism with friction in mind. For that I was searching for the static friction parametre's expression to use it in a later equation. I can't seem to get any i dea on how to find it nether on Creo 6 or 8.Any Idea on how to find it ?Thanks in advance.

I'm having fatal crashes while using Intelligent Fastener. I've created custom hardware for our department and sometimes it works nice and other times it crashes me out of Creo with a fatal error. I have no idea how to fix this and hope someone hear can help. I get the error at random times.....when I select a hole I want to assemblewhen I select the option to automatically select screw sizewhen I change the screw from inch to metric.Attached are the traceback of the error and the ifx_catalogs 

I have a specific question regarding Creo Platform Agent (CPA), as part of fault finding: When I start "Windchill Workgroup Manager" (WWM), on a normal PC in Task Manager I will see WWM, and under that CPA, permanently:But on my PC I do see this except every 2 seconds, CPA disappears for a moment then reappears, like if it is restarted:Also, based on this post, when no PTC software is running, I tried double clicking on creoagent.exe (which I found in C:\Program Files\Common Files\PTC\Creo\Agent). On a normal PC, CPA appears permanently in the Task Manager. But on my PC, it is started only for less than half a second.. Seems like a clue? I have tried uninstalling everything from PTC then installing only the WWM part (which I get through a script my employer handed me). After uninstalling I also tried deleting a lot of PTC leftovers on the disk and in the registry, but it is not easy to cover all of that. My question to you is if you have any tips in fixing

1)Since the middle mouse button is assigned to both "done/return/Escape"" and "rotate model", it is quite often that my CREO is confused about what I am actually wanting: rotate model so as to see the other side of it for facilitating feature selection in {Assembly mating, Measuring, assignments of BCs and loads (in Simulate), etc.}. Is there a simple way to avoid this and make CREO's life easy?  2)When assigning BCs to 200 surfaces, I have to hold down the Ctrl key in order to make multiple selections. If by accident the mouse click when the Ctrl key were not pressed, all the previous selection would gone. Is there a simply way to avoid this and make designer's life easy? Thanks.JS (_The last CREO user who hold fast to CREO when everyone else at my company has switched to SW officially)

Hi Partners, I want to run Creo Parametric in Chenese traditional. (Creo Parametric version is 9.0.0.0) I have already try the following method and it doesn't work. 1. Set environment variable LANG or PRO_LANG to cht (for Traditional Chinese ).2. Run reconfigure.exe to add Chinese_translation, but I can't find this option in it. (show in attach picture)3. Open "Configuration Editor", and set these option to Yes (dialog_translation / help_translation / menu_translation / msg_translation). Is there any other method can suggest? or, should i open a support case?

I am using Creo Simulate Release 6.0 and Datecode 6.0.6.0CREO SIMULATE NOT GENERATING BONDED SURFACE VIA THE WELD CONNECTION TOOLHere are the errors that I facedSIMULATION FAILS BECUASE IT IS NOT PROPERLY CONSTRAINED See attached file for visual of problem Update: changing the weld size from .25 to .5 has cause the weld to bond correctly (both surfaces bonded).  But still have problem with smaller weld size.  Software problem or user problem?

I am using Creo Parametric Release 5.0 and Datecode5.0.3.0My question is:How does Creo presently operate with Windows11. I am running Creo 5.0 presently. why am I running 5.0? I just haven't installed a later version. Thank you in advance for your attention.

Hallo Zusammen, Ich möchte zu meinen Werkzeugen Schnittwerte für unterschiedliche Werkstoffe ablegen. Hierzu möchte ich die im Werkzeug-Setup vorhandenen Datenbank nutzen (DB lesen). Hat jemand Erfahrung wie diese Datenbank angelegt und mit Daten gefüttert werden kann. Besten Dank 

HelloI am doing the tutorial exercise nr.5, following the instructions at this link:https://support.ptc.com/help/creo/creo_pma/usascii/index.html#page/tutorials_pma%2Fexercise_05%2Fcrankshaft_assembly_drawing.html%23wwconnect_header I got this message when I try to use this file.tbl assembly_bom.tbl :   Where can I find a compatible file for my student version?Thank you!

Greetings,as the title suggests i keep getting these unwanted lines (marked with red) which arent supposed to be drawn in my sketch and cant remove them with the edge display tool. all parts that go into eachother have cosmetic threads which fit perfectly.any help would be appreciated!

Hi there,    Every time I set a tolerance, I have to set the tolerance table to ‘None’ from the default type ‘General’, it’s really inconvenient, is there a way to set ‘None’ as the default type?  Regards,

Hi Everyone,   I'm in a situation where I work for an organization using ModelCheck. However, in my humble opinion, it's being used incorrectly. While I believe I have the credentials and experience to make this judgment call, I wanted feedback from the greater PTC Community so I thought I'd pose the question here and see what the responses are.   This particular organization has three prongs to their implementation of ModelCheck: Tight, restrictive settings. Different "codes" can be applied (via parameter) to each model as a way to ease restrictions. For example, a concept model has less restrictions than a model set for imminent release. However, in all cases the settings are very restrictive. ModelCheck runs at every save operation. It takes between 5 seconds and 3 minutes for Creo to return control to the user during a save. Users save less so they don't have to suffer the performance hit. If ModelCheck crashes the session of Creo, your work is lost. There is no alternat

Good morning, warriors still using Simulate,  I just finished a thermal analysis and obtained nice plots of temperature profile and heat flux profile. Since the heat flux at one contacting surface is not uniform, it is difficult to calculate the heat flow power through that surface. Is there a way now in Simulate to get the average heat flow power at a surface. I know Fluent has it, because I have been using it in another simulation job (for a different company. Note: I am working concurrently for different employers). Thanks for any hints. Best regards. JS

Hallo 🙂Could you tell me, please, how I can get the Member of assembly  to the BOM? Like in the BOM from gpeetersem on the picture.What is the report symbol? Attributes are No Dup/Level and Recursive?And is it possible to get to the BOM the file path of the part or subassembly?Thank you in advance Vaclav

I am using Creo Parametric Release N / A and DatecodeN / A You lose your license and you have to shut down the system Here are the errors that I facedThe license has been lost (save, close, recover) Translated with Google translate by Iuliana Nuta, 08 july 2022

I am using Creo Parametric Release 3.0 and DatecodeM170Can you please send the download link for for cero m170 versionHere are the errors that I facedNot able to find M170 Data code

As per this thread - same issue    Hi @HellerKoch ,   I am also facing the same issue while starting the application in creo that is compiled with the cpprestsdk library.   Have you found the solution?

I want to use the student version of creo on a new computer, how should I transfer my node-locked license?

I am using Creo Parametric - Release 6.0 (connected) Release 6.0 and Datecode6.0.4.0Creo taping iso and PSBT size selection not available in creo, also boring tool shifting after operation .Here are the errors that I facedcycle 84 and 86 error

I can not download this file: http://support.ptc.com/help/creo/creo_pma/usascii/index.html#page/tutorials_pma%2FDownloads_for_Part_Tutorial.html%23wwconnect_header Can someone help me, please?

Hi everyone,I'm running Pro/E wildfire 4 on my laptop which is running Windows 7. I'm having the problem where if I leave Pro/E open before I put the computer to sleep, upon waking up the computer the Pro/Engineer warning message pops up saying "Unsaved data may have been lost". Everytime I put my computer to sleep and wake it up, an additional pop up appears. If I have more than 2 warning messages, I can't click ok on any of them and I have to force quit Pro/EI attached a screen shot to this thread.Does anyone know a solution for this?Thanks

I am using Creo Parametric - Release 8.0 (connected) Release 8.0 and Datecode8.0.3.0We are given the error message listed below when adding certain imported parts to an assembly. This has effected numerous parts in our database and reimporting them would be timely. Is there any way to override this error in Creo Parametric 8.0 to avoid having to update all of these parts in our database?Here are the errors that I faced"This model cannot be assembled due to it not being a valid Creo file exported from another system. PTC recommends using an intermediate file types, such as STEP or IGES, or approved direct translators to create a valid Creo file."

I am using Creo Parametric - Release 6.0 (connected) Release 6.0 and Datecode6.0.6.0   1. I am using the config.win and creo_parametric_customization.ui, where the mapkey applied icon is stored, in the starting location. 2. If delete Config.win, the icons will be changed to smiley icons. 3. Please tell me how to not change the existing icon to a smiley icon even if I use only creo_parametric_customization.ui without config.win.   Translated with Google Translator by Hedy Jin on Jul 7, 2022 -------------------------------------------------------------------------------------------------- I am using Creo Parametric - Release 6.0 (connected) Release 6.0 and Datecode6.0.6.01. 맵키가 적용된 아이콘이 저장된 config.win과 creo_parametric_customization.ui 를 시작위치에 같이 넣고 사용하고 있습니다.2. Config.win을 삭제하면 아이콘들이 스마일 아이콘으로 변경됩니다.3. config.win이 없이 creo_parametric_customization.ui 만 사용해도 기존 아이콘이 스마일 아이콘으로 변경안되는 방법을 부탁드립니다.

I am using Creo Parametric - Release 5.0 (connected) Release 5.0 and Datecode5.0.5.0We are trying to install an updated node-locked license for Flow Analytics on a PC with a floating Parametric license.When we add the new license in Reconfigure on the PC it displays 'Invalid File or Format'Any suggestions?Thanks

Hello,   What is the expected behavior of using Annotation States together with Simp Reps for large top level assemblies?  I was working on an antenna field of view (FOV) analysis where I was trying to determine at what different angles the antenna FOVs would be obstructed by other stuff.  So my plan was to create a Simp Rep with nearly everything excluded, set the FOVs to Master, and the nearby components to Automatic (BTW:  Creo 4.0 M060).  I also created an Annotation State, based on this Simp Rep, with some 3D annotations.  The 3D annotations were simple text leader notes identifying which antenna is which, and I also took the part-level angle dimension and displayed it at the top level assembly Annotation State.  I expected the Simp Rep would prevent Creo from loading any data from the unwanted components.  Instead, the presence of the 3D annotations seemed to override the data limiting features of the Simp Rep.  While the excluded comp