Creo+ and Creo Parametric

I am using Creo Parametric - Release 6.0 (connected) Release 6.0 and Datecode6.0.6.0 A cosmetic surface is created, but does not display correctly in 2D drawings Translated with Google Translate by Emily on Jul. 4th, 2022-------------------------------------------------------------------------------------------------------------------------- Original Subject:创建了修饰面，但是二维图纸中显示不正确Original Body:I am using Creo Parametric - Release 6.0 (connected) Release 6.0 and Datecode6.0.6.0 创建了修饰面，但是二维图纸中显示不正确 

Similar to this thread:   Did you figure out how to do this? I am working on similar requirement, Please let me know if you have figured it out.   Regards, Prasad

I have a 3d note in a model assigned to 2 layers.  I need this note to remain on both layers.Modelcheck currently removing it from the last layer in the layer tree.How can I prevent this from happening when running interactive Modelcheck?This image is correct                    This image after running Modelcheck incorrectNeed Modelcheck to retain the second export statement noteI have attached the model-check config files.Any help would be appreciated! Thanks,Don A

the tolerance feature in unactive. as you can see i can't choose the type of tolerance in the feature in the blue circle. This doesn t allow me to change the tolerance. In the part i can, but in the draw i ve this problem. i tried to change tol_display in "yes" in the editor configuration but nothing changed. please help me.

Hello I have a question about the simulation part under Creo. I have an assembly that includes 2 arms connected by a plate, to make it simple. A force of 1000 kg is exerted in the center of this plate. To simplify the simulation, I use the mirror symmetry function. When we use the mirror function and we have a force that is right in the middle of the cutting plane. Creo simulate will exert a force of 500 kg on the arm that I use for symmetry or it will exercise the 1000 kg on the arm? Thank you in advance for your reply. ----------------------------------------------------- Original post in French Translated to English using PTCs Translate tool. Translated by & Date - vnamboodheri; 30.6.22 Bonjour,J'ai une question concernant le la partie simulation sous Creo. J'ai un assemblage qui comprend 2 bras relié par une plaque, pour faire simple. On exerce une force de 1000 kg au centre de cette plaque. Pour simplifier la simulation, j'utilise la fonction symétrie par miroir. Lorsqu'on uti

CREO 3 Analysis Slant not working. What to do? Translated with Google Translate by Emily on Jul. 4th, 2022------------------------------------------------------------------------------------------------------------ Original Subject: CREO 3 Analyse Schräge funktioniert nichtOriginal Body: CREO 3 Analyse Schräge funktioniert nicht. Was tun?

I am using Creo Parametric - Release 4.0 (connected) Release 4.0 and DatecodeM010How to set the text aspect ratio through code? The corresponding API was not found. Translated with Google Translation by Emily on Jun. 29th, 2022------------------------------------------------------------------------------------------------------------------------------------------Original subject: rsa-key-20220302 Original Body:I am using Creo Parametric - Release 4.0 (connected) Release 4.0 and DatecodeM010文本长宽比，如何通过代码设置，未找到对应的API 

As per this thread - same question:   I Am interested in this as well. I am looking to model something very similar to a 3D printer and seeing how everything moves would be great.   

Hi,I wonder if Mechanism can simulate a no-closed belt like the one you can see in the video.   (35) Timing Belt Telescopic Mechanism - YouTube The belt has the extremities fixed on a ground piece. Thanks

I am using Creo Parametric Release 5.0 and Datecode5.0.5.0The issue is that when we attempt to run a Flow Analysis we get the following error message: “The selected functionality requires Creo Flow Analysis license.” We are running Creo 5.0.5.0. with Creo Design Advanced Plus.Here are the errors that I facedThe selected functionality requires Creo Flow Analysis license

I am trying to write a new post in GPOST for our Siemens 840D controller, and I am having an issue trying to out put the PPRINT/ statements, the NCL file has the cl words in it, but the post is not outputting the statements. Any help is welcome Peter

Hi all, I am using Creo 4. Is it possible to find all the "not attached dimensions" inside a drawing?  When you have a big drawing, it could be a good tool to find them. Thank you

Hi guys,   we are working with Creo3.0 without Windchill and we are trying to generate some kind of "structural" BOM table to use in our assemblies. This BOM table will contain all parts of the assembly in the structure as the assembly is been assembled. So the table will look a bit as this:   ASSY-0001 (1x) ASSY-0100 (2x) PART-1000 (1x) -> (total=2x1 + 1x1 = 3x) PART-1001 (1x) -> (total=2x) PART-1023 (1x) -> (total=2x) ASSY-0200 (1x) PART-1000 (1x) -> (total=3x) PART-2000 (1x) PART-2010 (1x) ASSY-0300 (1x) WELD-ASSY-3000 (1x) PART-3001 (1x) PART-3002 (1x) PART-3010 (1x) PART-3011 (1x)   So far this isn't a problem, I just can sort my table on "rpt_level" and it will result in the correct structure. In this table I also can get the quantities of all parts, without any problem by using the parameter "rpt_qty". This will result in the quantity of all parts in that "level" (sub assembly)   But now I'd also like to have the total quantity of

I've got a family table of an assembly who's components are also family tables. The only thing that changes in the top level generic is the overall size and this is done by selecting the appropriate component instances for said size. We're using Windchill to manage all of our parts and workspaces. I am trying to add welds to the top level generic but when I do, it causes verified instances to become "modified in session" when retrieved. Even if retrieved into a brand new and empty workspace. This is an issue because a modified instance can cause the generic to become modified which in turn modifies all other instances in the table. This particular table is has hundreds of instances and it is simply not feasible us to bring in hundreds of instances and re-verify the table every time we need to use a member of this family table. I've tested this family table without the welds and did not run into this issue which is what leads me to believe that the welds are causing this. What

Hello,  I am a new user of Creo 8.0. I am trying to create a sketch for a flange wall in sheetmetal mode. It will not allow me to change the orientation of the sketch, because Sketch Setup is grayed out.   It doesn't matter if I am defining or redefining the sketch. Anyone know the secret to accessing this?

command errorFor example, the SELL command cannot be used.Hope to hear from the company soonThank you.

A handful of years have gone by since I asked the question on whether it was possible to either generate your own 2D text style font or import this from an outside source.   By any chance has this become easier to do?   My goal is to have a set of text characters that are matched to the text font used with our hand stamps.  The 3D characters do not machine correctly.   I did a lengthy Google search but couldn't find any solution.

I am using Creo Simulate Release 8.0 and Datecode8.0.3.0Fatigue extension advisor data sheet shared by PTC has a topic related to second order rain flow counting. Would mind sharing with us more information about the same.Here are the errors that I facednot applicable

I am using Creo Parametric Release 5.0 and Datecode5.0.5.0hi, I need to update my node-locked license for Creo Flow, but don't understand how. I have the new license file.

I am using Creo Parametric - Release 6.0 (connected) Release 6.0 and Datecode6.0.6.01. Inquiry about possible mechanism implementation / Coordinate system and shape position when importing step file / Interference check2. See attachments   Translated with Google Translate by Emily on Jun. 29th, 2022 --------------------------------------------------------------------------------------------------------------- Original Subject: 매카니즘 구현 가능한 방법 문의   Original Body: I am using Creo Parametric - Release 6.0 (connected) Release 6.0 and Datecode6.0.6.0 1. 매카니즘 구현 가능한 방법 문의 / step 파일 가져올때 죄표계와 형상 위치 / 간섭 체크2. 첨부 파일 참조

I am using Creo Parametric Release 9.0 and Datecode9.0.0.0When the creo user open main assembly model showing this message and closed creoven I attached parts in main assembly suddenly its closedHere are the errors that I facedFatal error encountered.A trackback had been written to C:\Users\Public\Documents\traceback.log please send it toTechnical Support

Hi there, I've been having a bit weird issue. I'm using Section Views in postprocessing, and it keeps messing with the color representation of selected values (as seen on images below). When I tilt the surface to some extent, the colors are OK, but as I'm moving it back to perpendicular view, the colors change as if there was weird light reflection going on (which probably is). I have tried to turn off the lights in Scene Editor, but it did literally nothing for the Flow Anaylsis modue, as if it had some lightning on it's own.  Any suggestion what might be wrong?Thanks

I would like to export a single step file with 5 bodies, with each of them retaining their individual color, like I have done in SW. However, no matter what settings I put in, it always applies the color of Body 1 to the entire list of bodies.  Am I doing something wrong here?  Thanks for the help!

Hi, I cannot open my creo software due to lack of connection to the licence, I have tried following the technical steps recommended by eSupport PTC without success, I need technical assistance as soon as possible.Thank you, Translated with www.deepl.com Translated by Corina Ionescu, June 28th 2022   Salve, non riesco ad aprire il mio software creo per mancanza di collegamento a la licenza, ho provato a seguire i passi tecnici consigliati da eSupport PTC senza avere successo, ho bisogno di assistenza tecnica al più breve possibile.Grazie,

1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Transportation Design. Mechanical EngineerStakeholders:  All Creo (ProE) users who model.2. What version of Creo Parametric are you currently running?Creo 8.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Sketcher Conflict Resolution.4. What is the use case for your organization? Modelling anything with sketch-based features5. What business value would your suggestion represent for your organization?Efficiency and time-saving in the design process. ================================================================Quite often, sketcher doesn't take into account all the correct dimensions and constraints that effect the conflict when a sketch element (line, arc or point) is over-constrained by too many constraints or dimensions. I know this, because I can delete a dimensi