Creo+ and Creo Parametric

About Creo secondary development replacement interface is incomplete and irrelevant component interface is not found   Case: About Creo secondary development replacement interface is incomplete and irrelevant component interface is not found Application scenario: In the Creo component model, select the model to be replaced in the model tree, and replace the part or component model under the model by right-clicking - "[Replace] - [Irrelevant Components]" function.     Problem description: Only the interface "using component interface and family table" is found in Creo_protookit. No development interface related to "[Replace] - [Irrelevant Components]" was found. This interface is now required to achieve the need for automatic replacement.   Translated with Google TranslateTranslated by Hedy Jin, Mar 14th, 2022 ------------------------------------------------------------------------------------- 关于Creo二次开发替换接口不全且不相关的元件接口未找到问题   Case： 关于Creo二次开发替换接口不全且不相关的元件接口未找到

Just created a new part and when I do the following to Create a Diameter Dimension for a Revolved Section:     1. Right-click and choose Dimension from the shortcut menu or click Sketch > Normal.     2. Select the entity to be dimensioned.     3. Select the centerline that will be the axis of revolution.     4. Select the entity again.     5. Middle-click to place the dimension. The dimension is created.   I get " this dimension type is not allowed" and "cannot create specified dimension". This was working in a different part seconds ago.  Why won't it work in the new part?

I am using Creo Parametric Release 7.0 and Datecode7.0.7.0Can ModelCHECK fix mass property units?I can see that MC can report on mass property material type, but can it automatically report or convert/fix unwanted mass property units?Ex: Model received from suppliers is in metric tonnes; needs to be checked & converted to standard inches.

Hi,There are separate machines for Creo view adapters. I configured them as Windows service (GSworkers).In some machines, the service needs to be manually restarted after the machine restart.Some machines, its get started automatically.All machines' service settings are the same and the config is also the same in Windchill UI. The below error is coming after the restart of the machine in those machines.  Help to fix it, so that the services get started automatically.

Hello All, I am trying to create a drawing for a composite layup, does anybody know how can I add the different rossette symbols to indicate the direction of the plies? Thank you in advance,

 The above image shows simulation result of a random vibration analysis. This is the first time I see a vibration simulation result with the total effective mass greater than 100%. How could it be allowed by Simulate to do this? Is there any software patch to prevent this kind of error? 

See pictures above. I am having trouble editing the tolerance on a drawing. Only the one that I want to change isn't working of course. I think it might have something to do with it being a draft dimension. Thanks in advance!

ive searched, and cant find a solution.  creo 3.0 M120 crashes when i try to save as a .pvz file.  the assembly isnt even that large of a file.  any input?

I am investigating the usage and implementation of MBD fro my division and have come across several road blocks.  I understand that while I am using Creo Parametric 2.0 and it is not "Truly" MBD friendly, I am still attempting to create a complete set of drawings for a product.  I have been able to create the 6 basic view orientations and save them as presentation "tabs" under Annotation.  I have also been able to create full view sections and detail them.  I have an assembly view that has a lot of little components in a small area, in order to define these, I need to create a detail of a section view or a partial section view.  Where I am having problems is creating either a partial section view or a detail view of a section view.  Does anyone have experience with these type of view creations?  Or does anyone have a suggestion to get around this? Thanks in advance for your time and assistance.

As per the post, Having the same problem.  Datum Feature Symbol appears at the same place on every single sheet of a drawing.  Creating a new sheet results in the same problem.  Symbol cannot be selected while on any ribbon tab, whether alt is held down or not.

Hi,  I am having this weird issue where a random datum feature has appeared on every single sheet I have on a drawing I am working on. This feature shows up on even sheets that have no drawing model associated with it. Has this ever happened to anyone else and does anyone know how I can get rid of this? I literally can't even click on it and it comes up on each sheet in the exact same place. Any info would be appreciated. 

I am using Creo Parametric Release 2.0 and DatecodeM250CREO crashed unexpectedlyHere are the errors that I facedFatal error encountered. A traceback has been written.We had several cases with crashes.

HelloI looked and I search and didn't find any references to this.Is it posible ? and if yes, how would you define a composite material such as concrete in a simulate analysis? As a start I was thinking of setting the material properties, I got this far  

Hello, How  can I download Creo View Watermark Editor?I have Creo View MCAD 7.0 licence.

Hello everybody,Is it possible to export a multi-sheet .drw file into a single dwg file using the Distributed Batch?Now, selecting the dwg_2d_export export .ttd file, a file is created for each sheet. Matteo.

Hi all,I have been asked to get data on license usage, specifically looking for what user's request at launch and comparing it to the license they get.We want to know if the majority of users are selecting the Essentials license and getting the Advanced license only because our pool of Essentials has ran out, or if they actually selected the Advnaced license.Now, I have made a custom launcher, so I can see what users pick, but I am struggling for a way to see what license they received ultimately. Does anyone have any solution?Cheers!

Hello. It is possible to find a reference in the component of a main assembly? Using SEARCH_MDL_REF I'll try to find a CSYS in the skeleton part of a assembly. I know about SEARCH_MDL_REF ASSEMBLY.... But how to search in sub-components of this assembly?

Hi. I'm new to animation.  I can successfully take snapshots of different part assemblies to create an animation, but how do I incorporate the whole assembly rotating as part of the animation (so the view start from viewing from the front, and rotates to end up viewing from the back)? I rotated the whole assembly when I took my snapshots, but seems when you create the animation, the specific viewpoints are not remembered in the snapshots. Hope this makes sense and you can help. Thanks!

I am using Creo Parametric 7.0.4.0Hello,The measure tool is not giving the shortest distance between and edge and surface. Has anyone figured out why this happens? It seems to use the edge of the surface instead of the surface geometry.   

I have a main assembly and within that assembly, there is a motor assembly. The motor assembly is an assembly with 5 different motors, controlled by a family table. Is it possible in the main assembly, to control the family table with parameters?I want to choose a motorassembly with an parameter or relation. Right now i choose the right motor with ''replace selected component or UDF'', but i think it can be changed in a smarter way than that. Hope you guys can help me out! 😄

Is this possible in Creo 7 without moving the detail view back to the sheet where the parent view is to redefine the spline  or the reference point? By now you would think that PTC would have figured out that this can all be done on the detail view itself without having move it to a different sheet.  When working on a large drawing like I am now it is very inconvenient. Does anybody have any work around techniques I may not know about? Cheers, Airfix    

Hey guys,I'm trying to design a cylindrical part with 2 normal ribs on it. But first I like to have a curve on the outside of this cylindrical part.What I've done is: I've created 5 points on the cylindrical part. These points are used to lead the curve through and then I've created a curve.The problem is that this curve isn't staying on the outside surface of the cylinder...Does anybody know how to solve this?Next I want to create 2 ribs on the part. These ribs need to stay parallel with the centerline of the part.I like to do this with a sweep, but the problem is that I'm struggeling with the settings of this sweep.Anyone who knows how to solve this?

Hi, We're using Creo 3.0 M190 in our environment, which is deployed through SCCM. It gets installed fine. Detection method used is to check 2 properties (Release and Shipcode) in registry key SOFTWARE\WOW6432Node\PTC\PTC Creo Parametric\3.0\2018360.  Is this the right way to check existence of Creo 3.0 M190 in a computer or is there any better way? Thanks,

Hi,I've create a restricted parameters table of fastners and it's working nice as expected. The only issue I'm having is, that I want the restricted parameters table to follow the part without having the file read each time Creo is started. I know it works with a restricted parameters file (not restricted parameters table) when you save the part. With the restricted parameters table, when saved off, it keeps the parameter name with only the last selected option from the drop-down list.Is there a way to accomplish this?Thanks

Hi, What's the proper way to use the windows system token(variable) for user id in a mapkey?I would like to replace johndoe with windows %username% token. I have tried $USER and $USERNAME with no success.Could someone point me to the correct syntax for using a system variable in a mapkey?    mapkey(continued) ~ Select `file_saveas` `ph_list.Filelist` 1 `c:`;\mapkey(continued) ~ Activate `file_saveas` `ph_list.Filelist` 1 `c:`;\mapkey(continued) ~ Select `file_saveas` `ph_list.Filelist` 1 `Users`;\mapkey(continued) ~ Activate `file_saveas` `ph_list.Filelist` 1 `Users`;\mapkey(continued) ~ Select `file_saveas` `ph_list.Filelist` 1 `johndoe`;\mapkey(continued) ~ Activate `file_saveas` `ph_list.Filelist` 1 `johndoe`;\mapkey(continued) ~ Select `file_saveas` `ph_list.Filelist` 1 `mydocs_pb`;\mapkey(continued) ~ Activate `file_saveas` `ph_list.Filelist` 1 `mydocs_pb`;\   Thanks for any help you can provide, Don A