Creo Modeling Questions

There are several students out there that are receiving error code 0x06000003  for a failed quality agent. this is causing a lot of problems with no answers!!

How can i generate a 3d-modell of an epoxy resin including short fibres. this fibres should be in statistical order in the matrix which is made out of the epoxy resin.is there a possible to create this model and if yes can you gibe some hints to create it (e.g. define material data of the fibres and the epoxy resin)?for germans:Ich habe eine Frage pb die Möglichkeit besteht ein 3D-Modell eines verstärkten Kunststoffes zu erstellen. Ich würde gerne Kurzfasern in eine Epoxidmatrix einbringen. Wie kann ich ein Modell erstellen in dem die Fasern in der Epoxidmatrix statitisch verteilt sind?Könntet ihr mir Hinweise geben wie ich vorgehen könnte (Definition der Materialeigenschaften der Fasern und der Epoxid Matrix)?

The video starts with an Autodesk logo... anybody fancy taking up the challenge? 3D Printed Sculptures Come Alive When Spun Under A Strobe Light | SF Globe

Hi,I need to write the date    /MM/YY in a sketch in Creo Parametric 2.0.I use the Text tool.I need to update automatically this date every time that i open the file.I know... I can use a parameter from the model parameter list, but i don´t know how to create a parameter with the actual date and always update it.Anyone knows how to do this?Thanks.

Bonsoir,J'ai un problème, lorsque que je lance Creo, une fenetre s'affiche et me dis " L'application Creo Parametic va s'arrêter car elle ne parvient pas à exécuter l'agent de qualité, nécessaire dans cette édition. Si vous contactez le Support Technique à propos de ce problème, signalez l'erreur 0x06000003."Voila donc mon erreur, j'aimerai savoir ce que je dois faire.Cordialement CHABANE.A

On my system is a customized command "OberflaeSymbole" its not a bad one. But unfortunately there is a small error in it and for me that means I have to change the symbol height to change every time from 2.5 to 3.5.I'd like to fix that but I don't know how to find the file in which the command is located.Help will be appreciated.

how to create a new supplier in emx8.0 to our requirements? i.e i want the set of plates only used in my projects how to create a such supplier?

With the advancements in problem resolution with "No Resolve Mode" you are still able to produce a backup model.  How do you access this backup model?  Can you only access this model in the old "resolve mode"?http://help.ptc.com/creo_hc/creo30_pma_hc/usascii/index.html#page/pma/part_modeling/part_five_sub/About_the_No_Resolve_M…

are PTC Creo Parametric 3.0 initial maintenance versions more stable than Creo Parametric 2.0?And does PTC Creo Parametric 3.0 have less bugs also,again compared to initial versions of Creo Parametric 2.0?

When open hyperlink to the new windows with Creo Parametric 3.0 chromium embedded browser, the new windows is blank. The link "emailto:" does not launch the email editor.

Hello, this is my first post. Im just wondering what are the best up to date books available just now for learning wildfire 4? Any suggestions? Thanks

  Hi,  I wonder if it is possible to make a ”proper” review-cloud, that can be scaled, and dragged in 2 directions as symbol, and even better make it so that I can type in Revision?Staale

Hi report wizards - I need some help.I am trying to create a report for an audit on changes to documents. Ideally I would like the Change Request number (and some info on the CR) and what documents were on the CR (doc info etc) and it would be wonderful if I could also add in who approved the CR (but that could be a different report).I am stuck at this point (report attached) in that the document numbers so several times in the row?

Running Creo 3.0 M070.  Why does the notification area show Copy Geometry out of date but not Merge/Inheritance. (Example below is copying from the same model)Why do you get update control on Copy Geometry in the RMB but not Merge/Inheritence.Is Manual update with Notification only available if you have DEX?

HelloI'm looking for a way with VB.API to get the regeneration status (Green, yellow or red light) of a model opened in CREO session.Do you know if it's possible?Thank you for your feedbackRegards,

Does Pro E support S3D out?

We're having a difficult time trying to load our title blocks from a text file into annotation via the macro scripts (open_infile and read_file  ) Whenever we have the degree symbol in one of the lines it always comes out as    ¯   and even if we change the font we get the same conversion.  Is there any way around this?

Anyone can help me to make centerline?

Buenas,Me he instalado la version de estudiante de Creo 3.0, y al iniciarlo me dice que sin registrarme en PTC Quality Agent no puedo seguir usando Creo. Que es exactamente esto?Gracias.

hello,why i cant launch creo 3.0,i installed properly but when i click icon on desktop,creo wont star,i really dont now what to do anymore

Can anyone help on the above error what does it mean?

THE LOST CHAPTER OF GENESIS:Adam was hanging around the garden of Eden feeling very lonely.So, God asked him, " What's wrong with you?"Adam said he didn't have anyone to talk to.God said that He was going to make Adam a companion...and that it would be a woman.He said, "This pretty lady will gather food for you, she will cook foryou,and when you discover clothing, she will wash it for you.She will always agree with every decision you makeand she will not nag you, and will always be the firstto admit she was wrong when you've had a disagreement.She will praise you!She will bear your children...and never ask you to get up in the middle of the night to take care ofthem."She will NEVER have a headache and will freelygive you love and passion whenever you need it."Adam asked God, " What will a woman like this cost?"God replied, "An arm and a leg."Then Adam asked: " What can I get for a rib?"Of course, the rest is history . . .

I am using the Measure tool to measure a sharpe angle between to surfaces, such as below picture shown, I thought the measurement result should be 60 degrees, but it turns out that the result is 120 degrees, I understand that the result Creo measured are from two perpendicular surfaces instead of the surfaces I measured, I can get the 60 degrees esult I want from some calculation, but it really annoying some times, especially if I need to take some picture to shown the measurement result to other people, every time I had to explain about this, I'd rather it give me a 300 degrees result, so that I can tell people that I am measuring the an obtuse angle between the two surfaces,   anyone can help on this? Thanks very much.

what is the specific use of Reflection analysis?

There is no a command that permit to you to do a mesh of revolution using the "advanced tool" introduced with the Creo release: the mapped mesh option and the prismatic element option.For example, I'm trying to do a 3d mesh on this quarter of screw.How can I do otherwise?Thanks.