Creo Modeling Questions

Hallo zusammen,ich bräuchte, zur Untersuchung, um einen Seashell zu gestalten (siehe Beilage).Jemand hat bereits versucht oder hat bereits Beispiele? Ich habe diese als stl aber ich wollte das bearbeiten, zB in zwei Teile teilen.Vielen Dank!Grüsse aus Tessin!

Can anyone tell me what version of the Y14.5 Creo 2.0/M140 is utilizing, OOTB? And can I change it from one to another?

Hallo zusammen,ich habe eine Hubschrauber entworfen, der zuerst nur aus 2D-Teilen besteht.Nun möchte ich die Seitenteile des Hubschraubers auf der Mittelachse zusammenfügen.Und das will mir einfach nicht gelingen.Kann mir da Einer eine Lösung anbieten?Ich lege mal alle Dateien bei.

Hello All,I am using Wildfire IV and am looking to setup Microsoft Office as the default email system for ProE.Currently when I click on "File /Send To/ Mail Recipient (as Attachment)" I get errors that there is no default email system.Thanks,Dennis

I'm trying to develop an asnyc application that is excuted by MFC GUI.I made GUI with MFC and code like below.It's compiled well. But Creo is not started.How can i excute Creo asnyc application with MFC UI?void CCALCDlg::OnBnClickedStart(){ProError status;status = ProEngineerStart("D:\\ptc\\wildfire50\\bin\\proe.exe",");}

Does anyone teach CREO parametric in their school? I'm teaching CREO to my 6th formers at the moment and its not going in! Any tips or decent tutorials that anyone has found useful?Thanks in advance, Liz

Running Wildfire 4.0. Just plugged in an Evoluent VerticalMouse 4. I have no “query” and no “alternate menu” functions (right mouse button). Anyone know anything about this? Thank you all, Matt Palazola Axcelis Technologies, Inc. mathew.palazola@axcelis.com<">mailto:mathew.palazola@axcelis.com> 978-787-9219

Hello Every one, any buddy guide me how to create a geometry based on points?Kind regards,

How can I check in creo, what type of corner relief can I use to bend the same material with less bending force.

this should be an easy one for all you guys out there.How do I make these dimensions larger?

Hihow to delete the objects located in different folders in windchill? the objects are referenced by each other.GN0----95205955-->need to deleteGN0----Tpye6 BG800 DR4400--------95205954 and other objects--->need to delete95205955 referenced by 95205954,95205954_skelshowed in followed printsreen:

Hallo zusammen,wo finde ich in PTC Creo die Einstellung zur Fang- bzw. Schrittweite in der Annotation?Im Moment springt mir der Cursor in etwa 1mm Schritten. Wäre gut, wenn ich den Fangganz ausschalten könnte, damit sich der Cursor stufenlos verschieben ließe.Mit freundlichen Grüßen zum neuen JahrWerner

I have a table cell with 2 lines of text. Would like to change the color of a word in the second line.Red & Green = zero, Blue = 255 Is this possible in Creo 2.0Also - just want to say that I'm really going to miss this exploder tool. You guys have been a valuable resource for me.I'm not sure when the kill date is so I just wanted to say.... Thank you to everyone.Tw

Hi,I am facing trouble in displaying chinese fonts in my template. All I get is boxes. While righht clicking and selecting properties, I am able to see the chinese font, but i want the same in template view. Kindly help me ASAP.Thanks in Advance!!RegardsPrashanth Gb

Hi All,I have spherical shell that I made in Creo 2. Now, I need to cut circular holes in the thin shell of the sphere. How do I set up a plane(s) to draw a circle so that I can subsequently cut/extrude that circle's profile down into the spherical shell at any weird angle I desire? In other words, I need to execute cuts not just along the X, Y and Z axes, but I need to be able to arbitrarily define my own cut directions. Plus, those directions will need to be "tilted".Or, is thare another way to do it? See attachment for an idea of what I am trying to achieve.Thanks

Hi All,I'm in Creo Parametric (not yet 3.0, or 3.whatever; I haven't yet updated) and I want to wrap those little black tank-tread pieces (22 of them, I think) around one of those white thick plastic gears (I don't know the proper name or model number [I renamed it]; it's the sort of counterpart of the tank pulleys. I have no idea how to constrain these for Creo. Has anybody done this before? Would anybody know how?Thanks,Jack

Maybe better to share this on other exploder lists as well... not many people are subscribed to the [ptcuser] list...

Hi Fiends,Can anyone help with details of how to download Demo Catalog content for Creo Parametric and its Modules.

Santa Ana College in Santa Ana, Californiais offering introductory and intermediate classes to Creo Parametric 2.0Including, Hands On Workshop to Creo Parametric 3.0

here is the case 12253254and here is an earlier thread.http://communities.ptc.com/message/258156#258156also is anyone else having this issue?thank you,JG

Hi I am trying to setup a users group at my current job. Does anyone have any experience at there current or previous position that could help me get started with ideas on how to set up a users group? How often do you meet and for how long?What content works well?etc..Any help would be appreciated.

I am new to PTC, and I need to make a chess piece using the revolve tool. Anyone who could give me some guidance would be greatly appreciated!

I have been a Solidworks user for many years, but I am new to Creo and studying it through the eLearning Library. There is a very simple exercise in eLearning that aims to teach how constraints work, but for some reason when I try it on my own I am having 'conflicts' when no conflicts exist. I have attached a small snip of the exercise (from eLibrary): The procedure (and the accompanying video) act as I would expect. However, when I try the procedure using an identical sketch (as shown): I receive a "resolve sketch" dialog box that prompts me to delete "conflicting" constraints. None of these constraints conflict in the traditional sense of the word, nor are they any different from the constraints shown in eLearning. Does Creo treat redundant constraints as conflicting? If so, why does the identical eLearning procedure work without problems when mine does not? Thanks for the help.

How can I convert commercial .prt files to academic .prt files?I am using the academic version of Creo 2.0, and I downloaded a .prt that was made in a commercial version of Creo (not sure which version).It says"The file 1001_15_cl.prt was created with a commercial version of Creo Parametric and is not compatible with the version of Creo Parametric you are running."