IoT & Connectivity

Hi Team,   Suppose in one section of my mashup there is a chart displaying data (Chart can be of any type) and I want to put download button to down the image of latest appearing chart.   How it can be achieved in ThingWorx 9.1.   Is there any widget already present to download these type of images?   Thanks in advance

When we tried to open Composer and runtime it didn't open. Error is displaying as "HTTP Status 404-Not Found"    

While reading csv file, not able to store one by one rows in infotable during runtime. It is storing only in variable. why? 

we need to have a filter that helps us select a row from an infotable, we attach the infotatable in the question

I have a thingworx instance where SSL certificate is not there. I want to connect that instance with a Kepware without SSL.   I have set Trust self signed certificate to false but still the connectivity is not established.  

Hi all,    during importing SourceControlEntities I got following errors.This is only happening when I am importing complete .zip file, but when I unzip this and import entities as a single file, it works fine.   Importing the same "project" to the version 8.4.x. is without errors.   Is there any possible solution how to import SourceControlEntities from older version to the 9.x?     Unable to Invoke Service ImportSourceControlledEntities on SourceControlFunctions : null   ErrorCode(cdeb5a8e-1660-4035-97fd-12e3db90e19f), Cause(null), Reason(Access was attempted on a null reference variable.), Possible Resolutions(Remove the reference to the null variable within your extension code.)

Hi, when i create infotable from datashape with Primary key it is accepting duplicate key. below are some snaps..please suggest the correct solution. i want to store entries with primary key. when i enter duplicate key it should update automatically as datashape contains  a Field (Primary key ).   Thanks,

How can I get the list of all the alerts that are configured for each Thing.  

Iam checking each row of datatable in for loop. So iam using code: resultDT.rows[i].XXXXX  I stored the field definitions in array arr[] inside the same service. I want to pass them dynamically inside for loop to the code resultDT.rows[i].XXXXX . I dont want to hardcode them again. How to make this possible?   

I have been following this guide(https://developer.thingworx.com/en/resources/guides/use-edge-microserver-ems-connect-thingworx/mlp-connect-ems) to establish a EMS connection with Thingworx. after executing the wsems in cmd am not seeing either error or success message. no result is shown in cmd. However am able to see EdgeThing (Example device name as mentioned in the guide) in Thingworx and able to create a remote thing. But when I tried to access the files using BrowseDirectory there is no data. I am attaching my config.json file, config.lua file and log file for reference. Somebody Please help me to resolve this

I was trying to Import a extension ConnectionServicesExtension-2.2.4 as per the instructions given in the following link:  https://developer.thingworx.com/en/resources/guides/azure-connector-guide/import-extensionsThen I get the following error: [context: Extension Exception][message: Error parsing C:\ThingworxStorage\extensions\temp\ConnectionServicesExtension-2.2.4_8fa5c171-09fa-4acc-9cea-dbcdf80a2ecf\ConnectionServicesExtension-2.2.4\Entities\Things\ProtocolAdapterLeaderElectionTimer.xml: (20, 32): cvc-complex-type.3.2.2: Attribute 'inheritedValueStream' is not allowed to appear in element 'Thing'.]   The Thingworx version is 8.4.5   So what will be solutions to avoid this.@paic @slangley @c_lowy  Thanks !!Shashi

Hi krishnakomal123,   I am also facing the same issue, if this is resolved Could you please share what is the resolution for this?   Eagerly waiting for your valuable response. Thanks, HJo.

Hi Experts, I created a barcode reader and decoder in Thingworx. A product bag contains a paper with 3 barcodes. I read 3 different barcodes and split them. After  the splitting I get 4 different strings. All of splitted strings stored in an infotable.    var params = {infoTableName : "InfoTable",dataShapeName : "DS_BaleMgmt_Barcode"};  dataShapeName:STRING):INFOTABLE(DS_BaleMgmt_Barcode)var res = Resources["InfoTableFunctions"].CreateInfoTableFromDataShape(params); var newEntry = new Object();newEntry.IRMS = "splitted string"; // STRINGnewEntry.LOT = "splitted string";// STRINGnewEntry.SSCC = "splitted string";// STRINGnewEntry.QTY = "splitted string"; // STRING .......... res.AddRow(newEntry);   If I scan the top barcode the service run without fail. But if I scan the other barcodes, the previously splitted strings deleted from infotable and textbox on mashup. How can I save all of barcodes/strings while I read all of  them and write the strings to a dat

The display choice of OK and Cancel in the Edit Query Dialog of the composer should be put to discussion. Normally the OK option is to submit the changes and therefore should be green and get the check mark.   Please have a look at this. 

Hi, Any information how to add a route to the MPMLink OData Connector in Operator Advisor by code? Found the AddRouteDefinition but I don't understand how to use it. There is no GetRouteDefinition so I can't copy from there. Let's say I want to create a simple route for GetParts with the name: "GetParts" and Endpoint: "getParts".

I am using a collection widget to mimic a list function. The data i show in each of the cell is name of the item, state date and end date. Based on the number of selections from the collections im calling another service which will show sub items belonging to all of the items selected through the collection widget. Allow selection and Multi select are both checked. On the click over any cell, the value is being passed through the selected row. But as soon i click on the same cell to unselect the data from the selected row remains the same. Ideally it should go back showing no output since i have unselected the cell. I guess this is a bug with the widget. If there is any solutions kindly let me know.    -Sachin

Is there any widget available in Thingworx like Planner? Following functionalities should be available : 1. It should look like a calendar.  2. On clicking the date Task add/delete, assign a task, etc. options should be there.   I am attaching a snapshot of the Microsoft planner as a reference.      

Does thingworx 8.5.4 supports in mobile also including all of its widgets?

Hello,   I'm running into a strange issue in my mashup where if I select a short time range, I see data from my properties in the most recent timestamps but towards the beginning of the time range, values are missing. If I then select a longer time range, I will then see data populating at those timestamps that were once empty.   See below. Both are at the same timestamps but different time range. LEFT: 7/23 22:30 to 7/24 3:00, values are showing at 2:45 RIGHT: 7/24 2:45 to 3:00, some values are missing at 2:45    Looks like data starts showing when the value changes. I assume I'm setting something up in my properties incorrectly or there's something I'm missing? This post is similar, but didn't see a solution.    Thank you for the help!

I connected ems to twx and followed ems connectivity steps from connect EMS to Thingworx tutorial  I am able to see the list of files from ems. I tried copying, moving files from ems to twx repo but not able to complete the process.   Getting error in twx composer : Error executing service readFiles. Message :: Wrapped com.thingworx.common.exceptions.GenericHTTPException - See Script Error Log for more details.   Getting error in ems: FileTransferService::execute: EdgeThing MoveFile unsuccessful. Return code : 0xA0    

I'm having a heck of a time getting the thingworx foundation trial installed. I've tried both RHEL and server 2016 and the error happens during the 'waiting for thingworx' step for each install.The documentation is also very difficult with conflicting information everywhere. A few examples:  self-signed certificate generation steps are different between the foundation installation documentation and the guide.   - keytool -genkey -alias selfsigned -keyalg RSA -keystore keyStore.jks -keysize 2048 -storetype jks     https://support.ptc.com/help/thingworx/platform/r9/en/index.html#page/ThingWorx%2FHelp%2FInstallation%2Fthingworxfoundationinstallerforlinux.html%23 - keytool -genkey -alias tomcat9 -keyalg RSA -keystore twkeystore.jks && - keytool -import -alias tomcat9 -file "twkeystore.jks" -keystore "..\jre\lib\security\cacerts"     - https://developer.thingworx.com/en/resources/guides/foundation-linux-install-guide/foundation-linux

hello, i have converted infotable data in json data by using tojson() snippet. now i want to get that data in json format by using getjson() snippet but it got the blank data...please refer below attachment below is the getjson() code:-   var params1 = { proxyScheme: undefined /* STRING {"defaultValue":"http"} */, ignoreSSLErrors: true /* BOOLEAN */, headers : undefined, useNTLM: undefined /* BOOLEAN {"defaultValue":false} */, workstation: undefined /* STRING {"defaultValue":""} */, useProxy: undefined /* BOOLEAN {"defaultValue":false} */, withCookies: undefined /* BOOLEAN {"defaultValue":false} */, proxyHost: undefined /* STRING {"defaultValue":""} */, url: "http://{IP}:{Port}/Thingworx/Things/digitalTwinThing/Services/getallDataRefiner1" /* STRING */, timeout: undefined /* NUMBER {"defaultValue":60} */, proxyPort: undefined /* INTEGER {"defaultValue":8080} */, password: undefined /* STRING */, domain: undefined /* STRING {"defaultValue":""} */, username: undefined /* STRING */ }

Hi community,   To test the anomaly detection with a simple use case I followed the steps in this guide, imported the anomaly mashup and to not wait for too long I updated the cmoTimer update rate to 50ms.   I didn't get to the stage of modifying, for example the sine amplitude, because prior to any modification the mashup showed me that is detecting as an anomaly the same sine used for training. I think that updating the update rate to 50ms shouldn't be the reason of the false positive detection but I could be wrong. Any thoughts why the anomaly detection is firing when it shouldn't?   Regards

Hello,   I'm currently trying to use InfluxDB 2.0 as a persistent provider with Thingworx 9.1. I tried following the tutorials on the PTC support websites but they only explain how to set it up using InfluxDB 1.7 and 1.8. I tried following those same steps documented there but i realized that the Data Base concept had changed in the 2.0 version of InfluxDB, which made it impossible to go on with the tutorial. As i started getting errors trying to execute CREATE DATABASE function.   Thank you in advance  

Hello Everyone,   I am currently searching for the google Maps extension for the thingworx composer, but am not able to find it at the marketplace. Generally it looks like that many extensions that used to be available are gone from the marketplace The picture shows, that in total there are only 11 apps available.Am I missing something? Have the extensions been moved elsewhere?Any hints on this are appreciated very much.Best Regards,Dominik