Mathcad

HiI would like to use simple "if" operators in my computation, just because I'm used to do so with Mathcad 15.Is it so that I also need to use "also if" statements with Prime?In some of my computations simple "if" statements appear to work, but for some reason the attached computations result into different results.Could someone clarify why I cannot use only "if" statements? Thanks

Hello everyone: This thread is a continuation (and different question) resulting from this thread: https://community.ptc.com/t5/PTC-Mathcad/Mathcad-Prime-Breaks-in-Integral-Graph-Causing-Problems/td-p/755864 The replies in that thread were helpful. However, I still have to take the integral of Werner_E's equation to get the moment graph; and now, I'm trying to take the integral again to get the deflection graph. Is anyone here good enough at taking integrals that you could provide formulas for the integral (as opposed to just using the software to taking the integral) and second integral of the equation in Werner_E's more efficient function V formula? For convenience, here is a link to his formula: https://community.ptc.com/t5/image/serverpage/image-id/48045iEF9ADF38676B3B81/image-dimensions/752x76?v=v2 Thanks in advance. 

Hello,i bought the prime 5 student version and in the installer i cant install the applicationwhat can i do ? 

Whilst playing around with a Newton-Raphson solver for a simultaneous set of functions, I noted a disparity between the Mathcad 15 and Mathcad Prime 7 results for the Jacobian of one set of functions.  To eliminate the possibility of other parts of the worksheet contaminating the environment, I copied the function to a blank worksheet.   Unfortunately, I get the same results.      Why is the derivative d/dξ for just cos(x₀) yet isn't when multiplied by x₀??     Mathcad 15 returns the result I expect.   Does this happen in Mathcad Prime 6 under the legacy symbolic engine? Is there a valid reason why this MP7 behaviour occurs? If so, should it? If not, is it a bug?   Stuart

Hello everyone, I am working on a specific case and I have a problem writing the correct code. Let me explain it.The file is attached. Even though some parameters are red, they are all known. I just had too much data to include in the file, and I just wanted to keep it simple. My goal is to obtain n1,n2,n3,n4,n5 coefficients, along with T1new, such that f(T) for this T1new will be equal to zero. Moreover, f1,f2,f3,f4,f5 must be equal to zero as well. As a result, I want to achieve such n1-n5 and T1new, that f1-f5 will be zero and f(T1new) will be zero. All other parameters are known. I am not even sure if I am on the right track to find the solution.Any help would be appreciated. RegardsMurarz  

Hello. I am trying install PTC Mathcad Prime Tryal version for 30 days but i am not being successful. After all procedure in PTC Web Installation Assistant, in the end, after download files, i have an Error: "Some applications failed or cancelled. Click information icon of failed application for details". I click on information icon and i have this message: "Installation failed. You can Restart the failed application installs or click Exit to close the installer". Can you help me install this trial version?

Hi all,I've a question regarding the use of the ODESOLVE function.In the attached file, I solve a ODE with the ODESOLVE function. It did work before, but now I changed 2 paramterers: How it was, and when ODESOLVE did work. How it is now. I've changed all the formulaes which include PB(rb,HL) too. But now ODESOLVE isn't able to solve the system. What could be the problem? Thank you lots for your help in advance!

Hi, guys,I am a teacher and would like to install MathCAD by usind an education license (which one don't need to pay).I alreadx created an ptc-account, but still can not find out, how to get an education license. Can someone help me?It would be greate, if my students also would be abel to get an education license.Best regards,Jake B.

Hello. I bought the product on 4th of January with a "erweiterten Downloadservice". Now 1 wanted to install MAthcad, but I cannot open the site http://www.findmyorder.com/de. I tried it serveral times but it didn't work. Therefore I couldn't download Mathcad. Can you please help me? I also didn't find another way to login on the ptc website.

Can't get WRITEBIN to output to a subfolder in Prime 7.0, although other write functions such as WRITETEXT will. Does anyone have a workaround for this, or is this something Prime will support in the future?

Hello, I have a problem with my file and I don't know how to solve it. It should be pretty simple, but I don't know how to solve it. I'm including the files and my program. My question is as follows. In the first for (counter j), when it starts from zero to 3, it gives me some values, when I start from 3 to 3, it gives me another value. Somebody can help me?Thanks

unable to find file for trial installation(windows 7)

when im trying to get trail license programm license unexpected error happendSection+ResponseHeader DetaIl=Po CR must be followed LF

Licenz lässt sich nicht aktivieren   ------------------------------------------ License cannot be activated   Translated with Google TranslateTranslated by Hedy Jin, Jan 10th, 2022

Hi AllHelp required as below. Thanks and Happy New Year.  

Hello everyone!In-depth study of the propagation of the electromagnetic field in a rectangular section metal hollow waveguide, with a Mathcad 15 worksheet. Please report any errors. The animation could not be made. Hope the zip file is accessible.Greetings

Ich habe die "PTC Mathcad Prime 5.0 Student Edition - One Year Term License" gekauft und anschließend den Installationsassistenten heruntergeladen und gestartet. Ich konnte den Lizenzvertrag akzeptieren und auf weiter klicken, auf der nächsten Seite "Anwendungsauswahl" erscheinen in der Liste jedoch keine Programme, die ich auswählen kann. Eine Installation von Mathcad Prime 5.0 ist daher nicht möglich.   ----------------------------------------------------------------------------------------------------------------------------------------------------- I purchased the PTC Mathcad Prime 5.0 Student Edition - One Year Term License and then downloaded and started the installation wizard. I was able to accept the license agreement and click on next, but on the next page "Application selection" there are no programs in the list that I can select. It is therefore not possible to install Mathcad Prime 5.0.   Translated with Google TranslateTranslated by Anurag Singh, Jan 10th, 2022

Hi!,Basically I have to draw the surface distribution given by the function f (y, z) on the plane of the tube section whose position on the axis is changed by moving the cursor of the slider. The fact is that unexplained phenomena occur when the cursor is moved, such as enlargement or shrinkage of the tube. Is anyone able to put order into that program? I solved a similar problem for a community member about ten years ago or more, without the use of createmesh but only with programming. I can not find it anymore.

Hi, is it possible to use Mathcad for optical ray tracing? I am able to do the ABCD gaussian beam propagation but wish to visualise the rays i.e. bouncing off mirrors.I am running Mathcad 15Thanks

i want to check this out, seems pretty fun to begin

I am still using MC 14.0. I had to re-install it because the motherboard on my computer went bad. Now, when I go to the Trace tab in plot format it comes up blank and clicking on anything but cancel crashes the program. Other tabs are fine. I installed the M020 release but that did not help. Any suggestions?  

I used the Mathcad to derive equations, but I noticed that the program gives a wrong derivate for the followingd[(x-1)/(4x*(1+x))]/dx, Mathcad gives the answer as [(-x+1)*x'*(x+1)+x(x+1)]/[4x*(x+1)^2], which is wrong. Would you please advise if anything caused such wrong answer?Thanks!

My students and me decided to check which oval Paint draws. It seems to be an ellipse. See pictures below and Prime 6 in attachment.But there was a suspicion that these are arcs of two pairs of circles - see Oval - Wikipedia. Problem. There are the coordinates of the four vertices of the "horizontal" oval. It is necessary to draw an ellipse through these points (this problem is solved) and an oval made up of arcs of two pairs of circles. What oval does Paint build? Maybe there is a third way?

Hello,Although not new to mathcad, I have never attempted anything other than a simple if statement with programming before. Today I decided to use a while loop so that I would not have to show all the iterative calcs written out in mathcad prime 6. Instead of having a condition attached to the while loop (for example "while n>0") I wanted to make my check based on an if statement at the end of the while loop. Essentially I would like the while loop to ALWAYS trigger unless a "break" or "continue" statement is reached within the while loop. I have posted my spreadsheet because I am really not sure how to even begin to guess what the issue is. In the mathcad sheet I wrote all of my initial calcs on the left. When I decided I wanted to condense them using mathcad programming, I developed the program on the right. Note that in the program my iteration check tolerance is based on the norm of the strain vectors which is different from my initial calcs where it was based on the distance t

I prepare my Mathcad figures for publication so that they are on a white background, not on a paper background. One of the solutions is to move the operator to the plot area with a white background.Are there any other solutions?