Mathcad

I am trying to sum of array elements. can someone help me to do this.the attached picture is extracted from vba.

Dear All,I was struggling with a strange problem in Mathcad. First, I could not change the unit in the result.Second, all the units in the equation are in same format, still it is showing error.Please guide me how can I change the units to psi. I have attached my mathcad sheet.

Рисунки к задачеСм. готовящуюся статью здесь http://twt.mpei.ac.ru/ochkov/Ship.pdfСилы, действующие на судноСхема задачиВвод формул для расчета высоты центра водоизмещения (hв) и центра масс (hТ)Ввод формул для расчета высоты центра водоизмещения (hв) и центра масс (hТ)Расчет остойчивости суднаГрафик остойчивости судна в зависимости от плотности водыОстойчивость перевернутого суднаОстойчивость исходного судна суднаДомашнее задание - создать анимацию опрокидывания судна-деревянного бруска.См. попытки создания анимации в аттач

Im still working on a routine and im stucking in defining a routine for each row of the vector.I need to define a certain condition and apply it to every row of the vectorsThe rows are depending on the Loadcases, which are read in mathcad.I still dont really understand 😞Thx 😃In this case i need to write the maximum value of the calculated 5 pressures to excel for every loadcase.

Hi,I am just now discovering all that Mathcad can do and I am having trouble with solving a system of equations that includes a conditional statement.  If I manually input the statements into the system of equations (at the end), it solves it correctly, but I would like the equations to change based on the selection of LL case.  Any help would be appreciated!Thanks,Nichole

I'm trying to create a title block for a calculation document, but whenever I create my heading with multiple lines the lower lines don't show up in the print, only the top one. Has anyone encountered this issue before?I've attached a little document showing the issue

Сайт статьи "Как вы корабль рассчитаете, так он и поплывет". The Journal Информатика в школе №04’2016 — Издательство «Образование и Информатика»See please one variant of the article http://twt.mpei.ac.ru/ochkov/Ship.pdfThe article discusses the calculation of sustainable ships in fresh and seawater based on re-viewed the forces acting on the ship. A laboratory work, covering physics, mathematics and infor-matics is given.Mathcad Prime 3.1 file in attachPictures of the articleРис. 1. Реставрированный корабль «Ваза» Рис. 2. Сайт, на котором можно оценить плотность морской воды Рис. 3. Модель судна и центральная секция реального судна Рис. 4. Силы, действующие на «судно» (слева — без балласта, справа — с балластом) Рис. 5. Вывод формул для расчета высоты центра водоизмещения (hв) и центра масс (hТ) Рис. 6. Расчет остойчивости судна с балластом в пресной воде Рис. 7. График остойчивости судна в зависимости от плотности воды

Hi I want to use the "on error" function to assign a value after an error occurd, however it seems that the "on error" function is not able to cope with an undefined variable, see example. In this case it is obvious that there is no sollution, however I would like to continou with the value 0 (or whatever) if no solution can be found. Can somebody help me how I can tackle this problem?I have also attached the example.

Hi!I am using Mathcad 15 and Excel 2013. I need help regarding this. This problem is only illustrative of the one I want to solve.Suppose that I have a Mathcad file wherein I am embedding an Excel Component. (See attachment).Say if the value of Cell A1 is not "Happy", Picture 1 will be hidden. It will be shown otherwise.Normally, it would be easy to do this in Excel. The code would be:Private Sub Worksheet_Change(ByVal Target As Range)If Cells(1, 1).Value = "Happy" Then    ActiveSheet.Pictures("Picture 1").Visible = TrueElse    ActiveSheet.Pictures("Picture 1").Visible = FalseEnd IfEnd SubNow, I am trying to make this code run inside the Mathcad embedded excel file by coding it there. However, I am confronted with the error:I am thinking that maybe I cannot refer to the embedded sheet as simply "Activesheet."Can anyone help me sort this out?Thank you very much!

can any one help me in finding T.max_2_10k_relief in the attached file i would be happy if the solution is obtained by not using symbolic solver here vonmises stress (sigmavon) is 120000psi

There is sth I miss abt matrix in Mathcad. I have 3 values of yyyd and I insert and compute the value of bb. Instead of computing individually, I put them in matrix and try to get the final answer in matrix. I try two times as shown in the green box but couldn't make it. Any help will be appreciated.Best,

Dear All,I was trying to solve the variable d, diameter of the pipe.I could not get the solution. Can any one help me to solve in mathcad.

My new installed MC14 on my new Laptop (Windows 7 prof) doesn't display 3D-Diagrams. What could be done?  W. Issel

I am looking for a way to invert the screen colors or to use high screen contrast colors. Under the Format tab, Colors, it is possible to change the background color, which is helpful. However, I have been unable to find a true inverted the screen colors or high contrast screen colors feature. Any advice?

Hello folks,does anybody know how to turn this oiecewise defined graph into a 3D plot?Thanks in advanceRaiko

please see the attached file and can any one explain me how the variable given T.max_2_10k_relief is not affecting the algebraic equation to get the end result.can some one explain what is going on in the background and is it the correct method to follow.

Ladies and Gentlemen,It has been about four years since I have touched MathCAD. I'm having a little trouble figuring out how to solve for two variables in a symbolic equation. Please see the attached file. This is in MathCAD 15. I've looked through my previous MathCAD files but haven't come up with a resolution yet. I didn't think I needed to define every variable, but I tried doing that and I just end up with 0's.

Hello,I have a quick question.I am using the MINIMIZE and MAXIMIZE function, to find parameters value that optimize a funciton.I am wondering how I can set the solver to find the GLOBAL max or min of the function, or to set to give me LOCAL max or min.Is that possible?Thank you in advanceRegards

Hi....I am trying to compute the standard errors for specified return interval years using bootstrap methods..I have computed  the bootstrap values at  the indicated return intervals but am not able to compute the standard errors of these return intervals  and could  use some help.ThanksDick....

Hello Expert,I have some trouble with Jacob built in function. when I calculate the partial derivative with respect to L1,L2,...L6, the answer should be 2L1,2L2....2L6. but the feedback from Mathcad shows all zeros matrix. as long as I know the answer should be diagonal matrix with 2L1,2L2,...2L6.I am really appreciate if someone can give the advice. Thanks in advance.P.S, enclose file, you can see the last equation, called Eqn(X,Y,Z,r.1,r.2....L.1,L.2...L.6)=~~

How can I change floating point in MathCad Prime 3.1? I am tring to short this 41.666666666666666667 (^ x 3)) (* 1058.3333333333333333 (^ x 2))) (* 8956.25 x)) 25251.75)  but I can't!!!and how can I change the equations shape from fractions shape to linear shape like this for example {(10*x-81)*(5*x-43)*(10*x-87)}/12 ??Message was edited by: ggg hhh

I have a large worksheet that was converted from 15.Today I made a number of corrections to some of the assumptions that new data has clarified.When I try to save the file, I'm getting this error:similar to the error I receive when I'm trying to open a Prime 3 file...the information in the log file is uninspiring.here's an extract:Exception data:File being saved: ..\Desktop\48V ph1 dcdc Full bridge 2tx 25 1 2016 with litz - Copy - Copy.mcdxSystem.NullReferenceException: Object reference not set to an instance of an object.   at Ptc.Controls.EquationControl.GetDisplayMatrixCell(IMatrixResultNode matrix, MatrixFormat matrixFormat, Int32 r, Int32 c, Boolean useEagerMatrixForSmallMatrix)   at Ptc.Controls.EquationControl.ConvertToEagerMatrix(IMatrixResultNode originalMatrix, MatrixFormat matrixFormat, Boolean useEagerMatrixForSmallMatrix)   at Ptc.Controls.EquationControl.ConvertToDisplayMatrix(IMatrixResultNode originalMatrix, MatrixFormat matrixFormat, Boole

Dear All,I am new to the mathcad. I tried to solve the variable d, which is diameter of the pipe.Where I am wrong? I could not solve for variable d.

Hello,I am new to Mathcad. I am having hard time to solve a simple matric equation like this mx is a 2 by 1 matric and  '2' is expected to be added to each row. Can any one please help me.Thanks

Hello,I am new to Mathcad. I am having hard time to solve a simple matric equation like this mx is a 2 by 1 matric and  '2' is expected to be added to each row. Can any one please help me.Thanks