PLM

Version: Windchill 12.1 Use Case: creating recipe overlays so that different 3dpdf templates can be used when publishing CATIA product and partsDescription: I have read the help documents on recipe overlays and understand the mechanism to invoke them in the publishing rules, but theres no instructions on how to create an overlay, is it just a recipe file with only additional or changes recipe options you want that then gets appended to the original recipe, or does it replace the original recipe and therefore should contain all the options in the original recipe?

Version: Windchill 11.0 Use Case: Windchill in our customer; methode server cann't start with error: "ORA-01017: invalid username/password; logon denied".Description: We are using Windchill PDMLink Version 11.0 M030/Oracle 11Since last week, CAD Creo users cannot/slowresponse access to the server. First I was check via status server >> average response time (red).Then, I restarted Windchill services (WC shell ; Stop >> Start).But in this point, windchill methode server cann't start back to stopped status in services.msc windows. Users can not acces anymore (Service unavailable).We checked  log,result at screenshot below :Next ,we checked the DB server ( we use separate server for DB Oracle).Storage almost full,then we extended storage tablespace.Then we try again to start the Windchill,but unfortunelly it stills no started.Do you know what happen? Server manager likes hangUp! methodserver fails to start.Information in log :We follow the resolution CS125275 be

I am using Windchill PDMLink Release 12.1 and Datecode with CPS 12.1.0.2Windchill performance advisor does not have the transmitted data Windchill is configured to send. The test transport reports that it was successful but I can only see a few license reports in the performance advisor tool. No other reports are present.

Version: Windchill 12.0   Use Case: Wcadmin account removed from all license groups except License Exclusion per CS329469. Description: After removing the wcadmin account from all groups except License Exclusion, I cannot open files in Creo. System says user is not authorized. I had to add wcadmin back to the PTC Windchill Advanced and PTC Creo Data Management and Visualization licenses to work in Creo. When I did, it used one of each of those licenses. What does the License Exclusion really do for an account like wcadmin?  

Hi @HelesicPetr, @Hari_Vara & @Hari_Varadh, Version: Windchill 12.0 Use Case: Used case: Add preference "include.genericname.with.instance=Yes" in the wgmclient.ini file. But due to this it is appending generic name for each and every instance of Family Table.Description: Add preference "include.genericname.with.instance=Yes" in the wgmclient.ini file.But due to this it is appending generic name for each and every instance of Family Table. Expected output: If Family Table instances having more than one top-generic only in this case it should                                  append the generic name in instance.

Dear @DKWc，   I encounter this problem that visualization failed with warning "Child lost connection to parent". Has your issue been fixed now? If so could you please kindly share your experience and solution? Thanks a lot and waiting for your reply.   Allen

Can some one give me insight of how many objects can we load using Windchill bulk migrator in a ideal situation(like hardware, network speed and other factors are optimal).I want to know how many number in objects load can we accomplish per day, for the below category:1. CAD(EPMDocument)2.Non-CAD(WTPart,WTDocument).Total objects to load is 850K objects(among them, 350K is CAD)

When I tried to create a new Dynamic Document from a DITA template, I did not find any button/action item that allowed me to create a Dynamic Document. Is some kind of add-on required to get this functionality?

Looking for a way to upload and download DITA files into Windchill that does not require Arbortext.

I am using Windchill PDMLink Release 12.1 and Datecode with CPS 12.1.1.0I am getting an error trying to login with an wcadmin account.The password has not been changed, but all the other accounts can still loginHere are the errors that I faced[Fri Jul 26 12:35:36.829964 2024] [auth_basic:error] [pid 5768:tid 3040] [client 10.225.178.106:62245] AH01617: user wcadmin: authentication failure for "/Windchill/app/": Password Mismatch

I created two subtypes through my bursting configuration: DITAtopic and DITAmap.<dmsobjtype><typerule sourcetype="text"targettype="wt.epm.EPMDocument|com.mycompany.DynamicDocument|com.mycompany.BurstConfiguration|com.mycompany.DITAMap"/></dmsobjtype>When I tried to create templates for these subtypes they did not appear as a valid choice under "Dynamic Documents". When I go to the Organization Utilies, DITAtopic and DITAmap appear as subtypes of Bursting (Bursting is a subtype of Dynamic Docs).If I re-create these 2 subtypes under Dynamic Documents, how should I be declaring them in my bursting configuration?Would the following be the proper way?<typerule sourcetype="text"targettype="wt.epm.EPMDocument|com.mycompany.DynamicDocument|com.mycompany.DITAMap"/>

I am using Windchill PDMLink Release 12.0 and Date code with CPS 12.0.0.0  Change Request Select Affected Objects page needs to add custom editable columns.Contact: Mr. Chen ----------------------------------------------------------------Translated the topic from Simplified Chinese to English using Google TranslateSubject:- 更改请求Body:- 更改请求选择受影响对象页面，需要实现增加自定义可编辑列。 联系人：陈工 - By community moderation team----------------------------------------------------------------

Version: Windchill 12.0 Use Case: Dear Community, I would like to integrate the windchill with thingworx. My usecase is that we already have done the part where we have pvz files in windchill. I want to integrate it with thingworx that i can get the pvz files from windchill so that i would be able to use them in vuforia studio. I have been working on thingworx and vuforia studio since more then a year and i dont know how to get this connectivity done between thingworx and windchill so that from expereince i would be able to get these file dynamically with the help of thingworx. Anyone can please help me to do this task.Description: We are using vuforia studio to show models and animations from pvz files for our customers and we have a case where we can expect changes often so our designers do the changes in the animation and then the pvz file would be saved in windchill and i want to get these files dynamically in experience with the use of thingworx so that customer can be able t

Version: Windchill 12.1 Use Case: wt.util.WTRuntimeException: wt.util.WTException: javax.crypto.BadPaddingException: Given final block not properly padded. Such issues can arise if a bad key is used during decryption.Description: Hello experts,I have done the cluster set up (identical nodes) as per the documents and suggestion given done the changes in wt. Properties file.When I try to access the load balancer URL it gives error shows in attached snapshot.I have done below steps so far1.Belwo ports are open on all nodeswt.manager.port=5002wt.method.minPort=5003wt.method.maxPort=50112.I have added the load balancer host name in /etc/hosts of the all node server.3.I have updated the required properties in the wt.properties asper the documentwt.rmi.server.hostname = my load balancer host name (using AWS loadbalancer)wt.cache.main.secondaryHosts = node1, node 2, node 34.ll method server are running on all nodes with these changes.5. When I hit the URL it is asking for the username and

Version: Windchill 12.0   Use Case: I want to perform Custom code deployment from source Windchill system to a new windchill environment, where I have the custom java files stored in WTHome\src directory. Also the custom configurations like loadFiles and workflows and templates to be deployed to target. I'd need help with steps to prepare Build.xml and create a .jar file and how to deploy it to target system Description: Required help with the steps to perform the ant script and build deployment on WIndchill 12.0

I am using Windchill Aerospace & Defense Release 11.1 and Datecode with CPS F000I moved the Windchill Database to a new SQL Server instance and services are not starting and the application is downWindchill Risk and Reliability Long Running Task Service 11.1 - Service not startingWindchill Risk and Reliability Object Broker Service 11.1 - Service not startingCould not connect tonet.tcp://************:12202/Relex.BusinessObjects.IService.The connection attempt lasted for a time span of00:00:02.0625271. TCP error code 10061: No connection couldbe made because the target machine actively refused it*.*.*.*:12202.Here are the errors that I facedin Event Viewer under "Windows Logs > Application":Service cannot be started. System.Data.SqlClient.SqlException (0x80131904): Invalid object name 'FileInfo'.at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)at System.Data.SqlClient.SqlInternalConnection.OnError(SqlExcept

Version: Windchill 12.0 Use Case:I have custom MVC table with some pre-defined columns. I want to add one more column which is uploadContent i.e, it swould be similar to add attachment so that user should able to browse particular file and add it to this table columnDescription: Hello Community, I have custom MVC table with some pre-defined columns. I want to add one more column which is uploadContent i.e, it swould be similar to add attachment so that user should able to browse particular file and add it to this table column

What stack does Winchill run on?I've always assumed Struts and Spring but not really sure. 

Hi Guys,One WT Part with CAD is assciated each other if i change the attributes in WT Part not updated in CAD. How we can over come this issue. [First time which i enter that value and attributes came in CAD,  but only thing edit in WT part is not updated in CAD] Regards,AJ

I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.1.0Windchill12： API for create Reusable Attributes and Global Enumerations then link with Type and Parts Link.Windchill12 如何使用API的方式创建可重用属性、全局枚举，并且应用于类型WTPart上和PartsLink上。

Version: Windchill 11.1 Use Case: Is It remove/hide the attribute based on the value of other attribute while Creating WTPart and Editing WTPart?Description: Is It remove/hide the attribute based on the value of other attribute while Creating WTPart and Editing WTPart?

Version: Windchill 11.2 Use Case: Restricting auto numbering for part creation in windchill rest api.Description: Im trying to create a WT part file using rest api.I'm able to create that without providing number property in the request .The part file is created with number generated from windchill. But when I try to provide a value for the property number in the request ,it throws validation error.Can you help me with creating a part file with any number provided in the request.Error message for reference:{    "error": {        "code": null,        "message": "The value for Number cannot be changed."    }}

Hi Folks,I'm a mechanical engineer, and wanted to learn the Windchill Data migration and Customisation process.Please let me know if PTC has some courses, or as mechanical engineer, what new things I need to learn to fullfill the requirements for Windchill data migration or Customisation Engineer. Thank you in advance 😊

Version: Windchill 11.1   Use Case: Uploading large files using windchill rest api Description: Hi ,          I'm trying to upload a large files in windchill using rest api. I'm not able to upload  large files using rest api . Is there any ways to upload large sized files .But when I try the same request using postman, the content gets uploaded. Is there any ways ,other than file path in the upload section, can we provide chunks of files that combine all those chunks into single file.

Hello,   I would like to use Apache Maven as a development platform for my Java projects (Windchill customizations). It seems that the structure of Windchill Java libraries and codebase is quite specific. I am looking for some tips on how to represent Windchill codebase as Maven artifacts.   Has anyone tried to develop custom Windchill applications in Java using Apache Maven? Would you share your experience?   Thank you in advance   Michal Palicka