PTC Education

Hi there, can you please help me. I registered my student email to creo student, but I didnt received any email with the license code and the download for the software. At last one week ago I emailed at creo support, but nothing happend. Best regards Philipp

The new Creo 4.0 is now available for Students and K12 schools. It has lots of improvements and it's really cool. Here are a few of the new features in Creo 4.0 (please note that some of them are not available for Student edition):Please note that Creo 4.0 will only run on 64 Bit Windows. Find the minimal requirements here.  

Hi,   I download CREO4 for student. But, i have an error when i try to install the licence.  I follow the roadmap write here:https://community.ptc.com/t5/PTC-Academic-Program-Discussions/Licence-Issue/m-p/536850#M9685%3F&art_lang=en&posno=2&q=student%20licence&source=search   But my issue remains.   Could you help me?   Regards  

Hello,   I am a mechanical engineering (university) student trying to install Creo v4 with a student license. After I filled out my information on the PTC website, the site gave me links to download the installation files (~4GB) and a PDF with instructions. Those instructions included a product code BE410708EDSTUDENTEDK12. When I enter it in the Installer, it prompts me to enter my email address and password for PTC.com. After I do that, the software hangs for a few minutes. Eventually the bottom half of the screen shows a path to a file in C:\ProgramData\PTC\Licensing\, and a status of "invalid file or format". The Next button is disabled so I can't go any further in the installation process.   From reading other threads, I have (unsuccessfully) tried the following:   Rebooting and deleting all files in the folder C:\ProgramData\PTC\Licensing before installing.   Disabling all network adapters except for the adapter that's connected to the inter

Hi, I'm trying to add a NC path to one of my models to allow it to be milled out of a bar by a CNC machine, but every time I go to start a NC manufacturing, or any sort of manufacturing for that matter in the Creo 2 student edition, I don’t get the manufacturing tab or any options. It thinks about it for a second then doesn’t do anything. I get no change from whatever screen I'm in. As a stopgap, I created a NC work piece over the top of the model in assembly, but I can’t get manufacturing to load or open to do anything else. I feel like I’m missing something, pointers?

Creo 3.0 Schools Standard Edition: http://apps.ptc.com/schools/references/relicense_creo3_schools_standard.pdfSchools Premium Edition: http://apps.ptc.com/schools/references/relicense_creo3_schools_premium.pdfNote - You will need to request a product code by submitting an Academic Request Form http://support.ptc.com/appserver/support/academic_case_logger/academic_case_logger.jspUniversity Student Standard Edition: http://apps.ptc.com/schools/references/relicense_creo3_unistudent_standard.pdfUniversity Student Premium Edition: http://apps.ptc.com/schools/references/relicense_creo3_unistudent_premium.pdfCreo 2.0Student Edition: http://apps.ptc.com/schools/references/relicense_creo2_student_k12.pdfAcademic Edition: http://apps.ptc.com/schools/references/relicense_creo2_academic.pdfNote - You will need to request a product code by submitting an Academic Request Formhttp://support.ptc.com/appserver/support/academic_case_logger/academic_case_logger.jspRegards,Abdul

hi i am ganesh. i had downloaded creo 4.0 and started to install.but i had found this message. what i have to do?

Hello Folk's,   Just wanted to know whether IOT based ThingWorx platform supports in-production Java application and database porting. I had already worked on Google App Engine and it supports database(with data dump) porting available for selected DB with Crystal Reports. What all needs to be done if I am having Java rest api based project and port it to ThingWorx platform to utilize M2M communication.   Help me on this!   Thanks

Hello. My student edition of Creo 3.0 M070 is shutting down every time i attempt to add a sectional view to a drawing sheet. The error is "Fatal error encountered. A traceback has been written to C:\Users\Public\Documents\traceback.log Please send to technical support."   I have attached the traceback in question.   I use a Dell XPS15 9550, with 64-bit Windows 10 Home, Intel i7 6700HQ processor, 16Gb RAM and a Nvidia GeForce GTX960M.   Any help is appreciated. Thank you.

please move to the appropriate product boardLink to post: (Creo 3.0 M070 Fatal error) by @adrien_legris https://community.ptc.com/t5/PTC-eSupport-Help-Discussions/Creo-3-0-M070-Fatal-error/m-p/539045#M684 <p>Hello.</p> <p>My student edition of Creo 3.0 M070 is shutting down every time i attempt to add a sectional view to a drawing sheet. The error is "Fatal error encountered. A traceback has been written to C:\Users\Public\Documents\traceback.log Please send to technical support."</p> <p> </p> <p>I have attached the traceback in question.</p> <p> </p> <p>I use a Dell XPS15 9550, with 64-bit Windows 10 Home, Intel i7 6700HQ processor, 16Gb RAM and a Nvidia GeForce GTX960M.</p> <p> </p> <p>Any help is appreciated. Thank you.</p> This message has 0 replies

I ran the normal licensing process like its described in the pdf file you get after downloadig the creo 4 version for students. When i open creo 4 it shows me the error attached (second picture). Where did i fail during the installation? Thank you for helping me out 🙂

I have a ESP8266 script that uses the urequests module to put to a property on the academic ThingWorx. The same ESP8266 script, with appropriate changes in URL and appKey, generates an ssl handshake status of -40.   Anyone have any ideas as to why?

I apologize - that first message/topic was lousy.   I have a ESP8266 Python script (below) that uses the urequests module to successfully put to a property on the academic ThingWorx.   This same ESP8266 Python script, with appropriate changes in URL and appKey, generates an ssl handshake status of -40 when trying to put to a property on an evaluation server.   Anyone have any ideas as to why?   ---script follows-- import micropythonimport network import urequestsimport ujson   yourWifiSSID = "SSID"yourWifiPassword = "password"   sta_if = network.WLAN(network.STA_IF)sta_if.active(True)sta_if.connect(yourWifiSSID, yourWifiPassword)   while not sta_if.isconnected():    print(".", end="")    pass   print() print("connected to network")   url = 'https://academic.cloud.thingworx.com/Thingworx/Things/OfficeWX_userName/Properties/LightLevel' headers = {'Content-Type': 'application/json', 'appKey': 'xxxxxxxx-xxxx-xxxx-xxxx-xx

hello, I am facing a problem while saving my creo model file as a PDF U3D file. image of the error message is as below. I tried changing the values of some options in the configuration file but it didn't helped. can anyone please help me to figure this out? traceback file is as follows.   Exception EXCEPTION_ACCESS_VIOLATION has occurred in the thread 5932. Main Thread 5932=====================0x00007FFBF520075A NULL (NULL:0) (coretools_sh:0x00007FFBF5180000) ( 0x3ed, 0x0, 0x0, 0x0 ) 0x00007FF69544B0AD NULL (NULL:0) (xtop:0x00007FF68F370000) ( 0x2000, 0x87823d00, 0x2000, 0xf9ddacd8 ) 0x00007FF69420E02B NULL (NULL:0) (xtop:0x00007FF68F370000) ( 0x4df64138, 0x2000, 0x7b9a85a0, 0x87823d00 ) 0x00007FF69420D7F1 NULL (NULL:0) (xtop:0x00007FF68F370000) ( 0x7b9a9570, 0x7b9a9570, 0x7, 0x7b9ad430 ) 0x00007FF69420E97B NULL (NULL:0) (xtop:0x00007FF68F370000) ( 0x0, 0x7b9ac090, 0x87823d00, 0x7b9a9730 ) 0x00007FF69420E55F NULL (NULL:0) (xtop:0x00007FF68F370000) ( 0x0, 0x7b9a9e60, 0x87823d00, 0

Hallo zusammenIch habe soeben Creo 3.0 Student auf meinem PC installiert.Nach dem Start erscheint die Fehlermeldung sh. Anhang ...Nach Bestätigung der Meldung schliesst Creo automatisch. Weiss jemand einen Rat?Besten DankRolf

After Windchill was upgraded last week, I was unable to connect ("unsupported server error").   I upgraded from Creo 3 version M030 to M070 and could now register the server.   However, whenever I tried to look at my workspace or Windchill cabinets, I'd just get a bunch of script errors and a spinning logo.   I can load Windchill files from the Open dialog, but can't do anything with them without the workspace interface in Creo.After trying to clear my cache, restart Creo, etc. with no success, I gave up.   I then went to another thing that irritated me - the "MicrosoftAgent/..." being added to my login dialog every time.   I found the solution in a Windchill CAD integration thread - change your default Creo browser using the windows_browser_type config.pro option set to chromium_browser.This made my login problem go away AND it also solved the script problems!!  I am now able to use Creo and Windchill like normal with Chrome under

Please help

Dear community,I tried to do thermal analysis using Creo 3.0 (educational edition) but I can't. The thermal mode is not active, I just can add loads (force, pressure and gravity), please see the attached file.I tried to choose Simulate Lite under Compatibility Mode, but the thermal mode is still not active!Kindly, how can I solve this?

CREO reported a fatal error and asked me to forward the traceback file to Academic support

I've followed what I can find to re-license our schools installations but with no joy.  We need to teach several  groups and have the prospect of non licensed computers and no lesson with Creo.  Any one got a straight forward work around that  can be implemented between lessons?

I have this blue circle on the side of my screen, and cannot rotate my models. Creo is being slow and nonfunctional.

Hello eveyone,My English not good. But I have a trouble problem.I have C++ program create menu,and some button can call vb.net COM object. I create a  form to test creo connect.I tried connect(Nothing,Nothing,Nothing,Nothing)Then Creo show error XToolkitCommErrorplease help...thank.enviroment variable:PRO_COMM_MSG_EXE = C:\Program Files\PTC\Creo 3.0\F000\Common Files\x86e_win64\obj\pro_comm_msg.exePRO_DIRECTORY=C:\Program Files\PTC\Creo 3.0double click => vb_api_register.batCreoTest.vb

your kind support is needed Thanx

Hi Folks,For a simulation we are currently using WebGL and the WebFrame Widget to display a few 3-dimensional objects (e.g. cars) in the MashUp. Those cars exist in real life as a toy model and in Thingworx, displayed in the mentioned way. The purpose/idea is now, that you open a door on the real model and the displayed model does the same. A sensor is sending the information to Thingworx. My question now is: Is there any way to use a CAD-model/Unitiy script or file/3D-Model that helps me realising the project without using WebGL and the WebFrame-Widget?E.g. importing the CAD-File as in a CAD-Widget and if the sensors gives the information, the car door opens. It doesn't have to open in smooth way, I just need the two conditions "open" and "closed".I hope my explanation is clear, if not just ask. I am new to Thingworx, so I really hope to not bother you with a noobish question..Thanks for helpingBenedikt

HI,I have Web Application . contained html pages. in one of the page i want to show Thingworx mashup in iframe/DIV . Here i am providing my code for better understanding<html xmlns="http://www.w3.org/1999/xhtml"><head runat="server">    <title></title>    </head><body>    <form id="form1" runat="server">  <div>    <iframe id="if1" width="800" height="500" style="visibility:visible" src="http://localhost:8080/Thingworx/Runtime/index.html#mashup=KPIUnassignedMashup&__fromBuilder=682940d1-235f-4d4f-b528-59e897e95ce6">   </iframe> </div>        </form></body></html>=============================In the above code i have given  mashup URL for "src" attribute of iframe control. But unable to see my mashup in iframe.Please help me to resolve this issue, Thank youRegardsSpandhana