System Administration

I'm trying to create a script for silent installation of creo 9.0.2.0. In documentation it is said that some xmls are needed to do that. So,  i installed creo 9.0.2.0 manually once and found that quality agent xml is missing. How to generate quality agent xml? 

I am using Creo Parametric Release 6.0 and Datecode6.0.6.0Hello sir,I need to one help from your side.I have import the company logo using paintbrush in format. but how to lock the aspect ration when importing time.One more i have created format in that i have import sketch logo.When using this this frm in drw geometry color and sketch color is same , can we set using pentable in different color.

Hi, By default, the Creo installation defines the path for Start in as C:\Users\Public\Documents (marked in yellow).Our policy prohibits writing to the C:\Users\Public path, and each user can only write to their own path, which is C:\Users\USERNAME\Documents\.How do you customize the path so that it is unique to each user who logs into the computer and launches Creo?

Hi!I want to reduce the number of Creo 8 licenses either in the license file itself, on the Flexnet-server. or somehow elseHow do I do that immediately?(Flexnet Release Version: 11.17.1.0) I don't want to have suggestions like "Cancel them". For Windchill I can just allocate a smaller number as I understand it.For Creo: I login to PTC, go to Support - License Management, License Actions, Advanced Search, put the server host ID, click Search and see the licenses that I can retrieve.But there is no option to put in a smaller number. Thanks!

I am using Creo Parametric Release 4.0 and DatecodeM080The colour coding of the model changes after regeneration.Here are the errors that I facedNo warnings or messages.

I am using Creo Parametric Release 4.0 and DatecodeM130 CREO opens the model and the mouse aperture keeps spinning: error dbg_err_crashO - continuing from serious error (ORDER_DEBUG) Here are the errors that I facedError dbg_err_crashO - continuing from serious error (ORDER_DEBUG)   Translated by the Community Moderation using Google Translate ----------------------------------------------------------------------------------------------- I am using Creo Parametric Release 4.0 and DatecodeM130CREO打开模型鼠标光圈一直转圈:报错dbg_err_crashO - continuing from serious error (ORDER_DEBUG)Here are the errors that I faced报错dbg_err_crashO - continuing from serious error (ORDER_DEBUG)

I had to format a computer, logos after configuring CREO this option that follows print is no longer enabled, before formatting the machine was normal, and same license and everything.

Hi, I have figured out how to borrow a license and to set it in my system valiable. I have a few questions: 1. How do I return a license before its due date? 2. If I do not return the license before it's due date and check out a licence for more time, for example.....will the first one I borrowed still remain borrowed for the time left? I guess what I'm saying is.....do I have to return the license back before borrowing another? I don't want to monopolize the licenses. Thanks, Wayne

I had Creo 8.0 installed on my machine, and I needed to install Creo 10, but my Flexnet wasn't compatible, so I had to remove everything and install Creo 10 again, but now it doesn't want to install Flexnet again, is there any way to do this?

I am using Creo Parametric Release 4.0 and DatecodeM070When I opened the 3D model, particularly complex in shape, it ended up resembling radiation or an explosion, making it unusable. What could be the cause of this issue? Could it be due to insufficient specs on my computer? Please help.

Hi, I have a very simple question. How do I see the status of licenses on my network at work? I tried ptcstatus.bat and don't really see what I am looking for. I would like to see all the creo parametric licenses in particular and if used or borrowed. Thanks, WayneF  

I'm installing Creo 10 when I put in the license it accepts it, when I open Creo it gives a license error

We have both Design Essentials licenses and Design Advanced licenses. The one difference is that Design Essentials does not have the optional module Assembly (#6) in the list of modules. We can create assemblies with the Design Essentials license, so there has to be something more in the module besides just assembly creation.  Does anyone have better definition of what is provided by using the Design Advanced licenses with the Assembly module over the Design Essentials license?

Hello,   Does anyone used Creo on MS Azure ? If yes, can you please describe your rendering experience and the hardware specs you are using ?   Thank you. 

I could open parts fine in Creo 3 M120 / WC 10.2 fine for years but then recently I get the "cannot be retrieved" error whenever I try and open something from my workspace.  I have tried the following so far:1. Using another PC - same error2. Logging in with another user on my pc - works fine3. Reinstalling Creo 3 M120 on my pc - error persists4. Clearing cache - error persists5. Deleting all existing workspaces and creating a new one - error persists6. Deleting user and re-adding in WC - error persists I think it must be a Creo agent issue or something similar? I have run out of ideas...  

Software: Creo Parametric 7.0.10.0   I want to assign some sheet metal design rules and have created one. Can we verify those rules in the model. I tried using "MODEL CHECK Rule Check". But I'm getting this error "Cannot read rules from file". I have saved the rules in this filename "design_rule_test.rul" (as saved from Model properties). But in creo documentation, it is mentioned that the file should have ".rule" extension. I have also created "RC_MODEL_TYPE" parameter. How to do this correctly. Am I doing something wrong?    

How do you modify the config.pro file on Creo 4.0 M-150.

I am using Creo Parametric Release 8.0 and Datecode8.0.8.0Is there any possibilty to copy as external representation in toolkit? (similar to Copy As External command in Creo)

Hi everyone,   Please help me adding the full file path name in drawing print out. Is it a printer setting or creo config's setting? Let me know please.

Anyone can tell how do we change the font size of the creo UI. I mean the overall size in ribbons, model tree and all?

I am using Creo Parametric Release 7.0 and Datecode7.0.9.0Hello,I want to create a custom balloon with two parameters (&asm.mbr.cparam....). I defined a new symbol and defined these parameters in the variable Text.When I want to display the icon as a custom balloon, I only see the parameters and not the value of the parameter. Can component parameters be displayed in BOM balloons?I also tried with an assembly parameter, but that value doesn't appear in the balloon either. Do I need to pay attention to the custom balloon so that I can evaluate parameters in the balloon?

Just came across article CS378421 for whitelisting certain URLs in Creo's embedded browser.  This is close to what we need, but it would so much easier to implement for our purposes if there was the possibility to Block certain URLs, rather than trying to document all possible allowed sites. Could we for example have a ZBrowser Registry Key called BlockListLocation and manage that like the AllowListLocation?  This would be a major win for us as it would solve an age old company specific Windchill cache corruption issue I wont get into here.. 

I am using Creo Parametric Release 6.0 and Datecode6.0.6.0Hello, I'm working on a project with several people, and everyone designes mechanically welded assemblies with AFX. It creates a part for each profile, each beam which is saved locally (only on the CREO session). Yet, when another colleague wants to open this assembly, no profile is found or displayed. Lots of parts are missing in the model and it's impossible to work with serveral people on the same assemblies (not in the same time).Is it possible to resolve this probleme so that the profiles and beams would be loaded regardless of the open CREO session?Thank you in advanceHere are the errors that I facedMissing modelMissing reference

HiI am looking for a drawing format for academic use. mm, ISO, 3rd angle.I'm looking for format that templates of standard part and assembly template will be linked to parameters (DESIGND_BY and DESCRIPTION) Thanks

I am having an issue accessing Creo 10.0. I had Creo 9.0 but had to update due to my files upgrading from 9 to 10 on my new laptop, so my old laptop running 9.0 could no longer open these files. I attempted downloading creo 10.0 using my schools access, however I am running into an error I do not understand, a screenshot is provided below.