System Administration

According to article CS400725 Creo Parametric exits in many scenarios with tracebacks. Corrected in Creo Parametric 8.0.10.0, 9.0.7.0 and 10.0.3.0 So download one of these and one will never crash again. 😎

is there a way to have a floating license and be able to remotely point to it ? would like to have creo on my personal laptop and be able to point to a generic floating license that is on our server AT WORK without having to team viewer in to my work computer FIRST and work thru my work computer. Seems to be slower going thru a third party approach.

I have created a mapkey that users use for updating legacy Creo parts (Creo 6 and earlier).  We are now on Creo 9.The mapkey checks for missing relations and parameters (including restricted) then adds them if they are missing.  The issue is that it will duplicate relations that already exist.  I put a pause in the mapkey telling them to delete old relations before continuing but we know that doesn't usually work. I also have Modecheck running looking for the missing relations and errors if they are missing.  It tries to add them even if they exist due to the fact that they are in the Post Regeneration relations. The relations that Modelcheck adds appear in the Initial relations. The reason for locating them in the Post Regeneration was that it was overwriting legacy relations located in the Initial relations.  It is causing a regeneration issue that Modelcheck flags.In my mapkey I have relation written to bypass a couple relation (these came from PTC

I am using Creo Parametric Release 6.0 and Datecode6.0.6.0In sheet metal mode, are there any function to set limitation of Sheetmetal to protect overlap each other when unbend?Now user use Flat pattern preview to check after finish Sheetmetal design.However, user don't want to fix after check by use Flat pattern preview.They want some command to alert overlap when during design sheetmetal on that time.Please share some technique to help me.

Has anyone else noticed that sometimes ModelCheck will flag a word as misspelled even though it is in the user_words dictionary file? I even cut and pasted the word from the ModelCheck results flagging it as an error into the user_words file and the next run it gets flagged again as misspelled. The word is CONTAINMENT. We are running Creo 9.0.5.0.

I am using Creo Parametric Release 5.0 and Datecode5.0.6.0 The 3D Sketcher dimensions are marked with (E) like a symbol. I am inquiring because I cannot find any correlation between modifications, relations, and parameters.   Translated by the Community Moderation using Google Translate ----------------------------------------------------------------------------------------------- I am using Creo Parametric Release 5.0 and Datecode5.0.6.03d 스케쳐 치수에 심볼 기호처럼 (E) 표기가 되었음. 수정 및, 관계식, 매개변수에 연관관계를 찾지 못해 문의 드립니다.

I am trying to modify the built-in weld symbol (ISO) to be used with the Weld Tool for 3d annotations. However, it seems that the Weld Tool is building the symbol from left to right in the code from a bounding box around the individual elements (weld size or weld length). The tool will stretch or shrink the symbol to fit, however if I try to add elements it will also try to place a bounding box around the elements that I add and it ends up way too long. A manually placed symbol looks correct, however, a symbol placed by the weld tool will show spread out with empty space in between the elements. If I move the custom lines from one group to another, they will stretch the symbol in different ways.Creo 9.0.2.0Does anyone have experience with this? Any suggestions on how to modify the existing symbol without disrupting this built-in auto-spacing?

Can someone help me? I have installed Creo 3 and Creo 10, on both it looks same. I can select the part but it is not visible at all, just a white window. jk

Where I will find my sales order number for creo 10.0?

I am using Creo Parametric Release 7.0 and Datecode7.0.3.0How to round a feature that goes from pocket to protrusion.

I am using Creo Parametric Release 6.0 and Datecode6.0.6.0See pictures and log when importing an STP file. We have already updated grpahics drivers to latest releaseHere are the errors that I faced-------------------------------------------------The trace creation timestamp is: Fri Dec 15 10:02:35 23The executable build timestamp is: Thu Feb 04 00:03:18 21The datecode is: 2020354The pro machine type is: x86e_win64The process ID is: 11188The traceback type is : CRASHThe logger exit status is: 00003The Trail is: trail.txt.51The release is: 6.0The product version is: 6.0.6.0The product title is: Creo Parametric-------------------------------------------------Exception EXCEPTION_ACCESS_VIOLATION has occurred in the thread 11100.Main Thread 11100=====================0x00007FF68C074086 NULL (NULL:0) (xtop:0x00007FF683C80000) ( 0x1a180b90, 0x1a188248, 0x0, 0x0 )0x00007FF6880845A4 NULL (NULL:0) (xtop:0x00007FF683C80000) ( 0x5d0cd1a8, 0x0, 0x1a188248, 0xffffffff )0x00007FF68BEFFD96 NULL (NULL:0

We just recently updated to CREO 10 (10.0.2.0) and found something interesting.  when we save our models, some are being saved with the wrong owner.  We were on CREO 6 and this didnt seem to be an issue at all.  We have our file versions turned on. For example, we have a part named stud_end_locking.prt.82 with owner as "XXXXXXXX" saved on 5/18/2023.  Today, user "YYYYYYYY" saved stud_end_locking.prt.83 and the owner is displaying as "ZZZZZZZZ"If I save an assembly with say 15 different parts, some of the new versions that save will have my user name as the owner and some will have other user names as the owner, even though that other owner hasn't even been in CREO parametric.  today I saved a part and a new version was created with the owner of someone who left the company over 6 months ago.in the screenshot, i saved .82 and today i saved .83, but as you can see, the owner is not me.  The owner of .83 is someone who left the company over 6 months

Community members... I'm making a cavity and every time I make the part it comes standard with "Units"=millimeter Newton Second (mmNs) AND Precision = Absolute 0.01. I would like to create a different measurement standard. As I am in Brazil, we use millimeters and the precision would like it to be Relative 0.0012. What configuration should I use? Thank you very much!   Creo 10.0.3.0   Translated by the Community Moderation using Google Translate         Membros da comunidade... Estou fazendo uma cavidade e toda vez que faço a peça ela vem padrão com "Unidades"=milímetro Newton Segundo (mmNs) E Precisão = Absoluto 0,01. Eu gostaria de criar um padrão de medição diferente. Como estou no Brasil, usamos milímetros e a precisão gostaria que fosse Relativa 0,0012. Qual configuração devo usar? Muito Obrigado!  Creo 10,0.3.0

I am using Creo Parametric Release 8.0 and Datecode8.0.5.0When using IFX I am unable to create an instance for PEM fasteners. I set the folder to create the part files and then select any of the OOTB dat files provided for PEM fasteners and CREO returns a PRO TK error. I have had no problems when creating any other type of nut, washer or screw, it is only PEM fasteners that do not work.I have noticed that there are no nut_80.prt or nut_99.prt files in my folder C:\PTC\Creo 8.0.5.0\Common Files\ifx\parts\ifx_fastener_templates\nuts (if that is relevant)Here are the errors that I facedError message reads "An unknown error occurred (PRO_TK_E_NOT_FOUND)

I need to find this file inside creo , I've searched and all the PTC folder , but it doesn't find anything pmech_conn.TXT

Hi, when running ptcstatus.bat from a users PC, it writes "counted" at all licenses.    running it from the server it writes who are using the license and etc. Any one know what setting to adjust.  I guess it is either the VPN or Firewall that need to allow access.   I hope someone can help me, thanks

I am using Creo Parametric Release 4.0 and DatecodeM150INTRALINK：11.1 M020-CPS19Creo：4.0 M150If I lock a part in the workspace, I can't modify the hatch interval of that part with DRW.Is this normal?

I am using Creo Parametric Release 8.0 and Datecode 8.0.7.0Hi,While running a Multi-Objective Design Study, we find that a regen backup of the model is stored in the working directory before being deleted.We do not have "regen_backup_using_disk" set to "yes" in our config file, so this was surprising to see. Is it possible to turn off this feature of temporarily saving a backup?The Study is 20+ hours and we're wondering if turning this off will reduce this time?Thank you.

I am using Creo Parametric Release 7.0 and Datecode7.0.4.0I am making a drawing for an assembly. I want to be able to change the appearances/colors of various parts for different drawing views (the drawing views have their "Display style" set to "Shading With Edges"). This way I can highlight the different parts in each drawing view.To accomplish this I have created multiple bodies of each part. Each body has a different appearance/color assigned to it. I then have a family table in each part that can suppress/resume each one of the bodies. In the assembly I have multiple simplified representations that use the various instances of each part. This allows the different appearances/colors of each part to show up in each of the simplified representations. This works great in the model, but the different appearances/colors do not show up properly in the drawing views. The colors are all wrong in the drawing. Its like the appearances are brought into the drawing properly or something How ca

We've been having a bit of trouble allowing offsite folks to be able to access licenses for Creo (we're using V9.0). The IT folks have tightened up access to the network, and thus the random assignment of ports that is normal for the ptc_d daemon is not working well. lmadmin is okay, because that is at the "standard" 7788 port. I'd seen posts on these forums implying that I could add port to the end of the DAEMON line in the license file and that it would thereafter use that port for the ptc_d daemon. I did this, with 7799, but it doesn't seem to be having any effect. Is this the correct method to specify that second port? It deviates from the method suggested by Flexura, but I figured this is PTC and they have their own setup for licensing. Am I wrong?   P.S. I know it is possible to set up the firewall to allow communication with ptc_d.exe and lmadmin.exe, but I'm just looking at the port issue at the moment.

hello everybody, we are using FLEXNET PUBLISHER 11.19is it correct that PTCSTATUS on server machine is not showing IN USE license even if they are used by users?ptc_d.log shows license as INACTIVE but the licenses are in use by designers.thanks   

As per this thread - same problem   Yes, I can confirm that this issue is present again in 8.0.1.0 Oddly, the scaling seams only to appear, when a browser window is pop-out (e.g. you click a link, that opens a new window with Windchill). But this instantly scales also the content of the docked window. (before and after) I tried the solution/workaround described by llie, but unfortunately this did not solve the problem.

As per the original post.    The company that I work for, is using Windchill Release: 11.0 M030-CPS11 with Creo 6.0.4 I wonder if we can go to Creo 7.0.  Do you know where I can get that info? Thanks  

 I am using Creo Parametric Release 7.0 and Datecode7.0.2.0What is the best way to set up a diamond screw for mechansim design? The principle is a helix groove in the shaft and a "knife" or tap in a follower to drive the follower over the distance of the groove. I tried using cam follower over a curve in the helix, but it will only take a partial of the length of the screw.Anyone tried something similar or have any ideas?

Hello,I have a problem with the firewall of my Windows server 2022 blocking the FLEXnet Admin License Server program, when I go to Private network settings and set it to turn off the machines access normally, I have already released the path C:\Program Files\PTC\FLEXnet Admin License Server\lmadmin.exe but it still gives an error that there is no license something else needs to be done?