System Administration

I am using Creo Parametric Release 9.0 and Datecode 9.0.1.0I need to upload a transparent image into a Creo format file (.frm). I can upload images into the format files but Creo always gives them a white background. I have tried to insert transparent images of many different file types and none have retained their transparent background once uploaded into Creo format.

I am using Creo Parametric Release 5.0 and Datecode5.0.5.0   Good morning,I would need to know which electrical CAD is more compatible with Cabling between "Siemens Capital" and "Zuken" to be able to do 2D imports and exports ----------------------------------------- Translated text from Italian to English using google translate. Subject: compatibilità di Cabling Body:       Buongiorno,avrei bisogno di sapere quale cad elettrico è più compatibile con Cabling tra "Capital di Siemens" e "Zuken" per poter fare importazioni ed esportazioni 2D. - By Community Moderation Team -----------------------------------------

I am using Creo Parametric Release 4.0 and DatecodeM150I tried renaming a part its model name changed but the common name remains the same.I tried to rename it using change in session as well as on disk but after saving the part and restarting the application I found the common name unchanged.

We have one Workstation which is outdated but we have Wildfire license against this Host, so shall we install same license in new workstation.?

Hello, I need to download Flexnet admin to manage my Creo Schematics licenses where can I download the latest version for Windows server 2022

I installed creo 10 some days ago and did some designs in that. later again I moved to creo 9, but after installing that I can't able to open the designs that I did in creo 10. Ps : I am using student version. please comment for any solutions ! When I open only I can see blank screen as shown in picture I attached.

In Creo Parametric, is there a way to search/filter the model tree for a list of part numbers at once instead of searching for part numbers one at a time?    In Creo View there is a "Multiple Search Values" option where you can search for a list of part numbers at once. In Windchill there is "OR" Boolean logic that uses a semicolon ";" to allow the search of multiple part numbers.

Good morning, I recently reinstalled Creo 6. I didn't pay attention to my configuration options and the "save_file_iterations" configuration was set to yes. I modified my configuration options to no longer have iteration for my next files and I understood that if my existing files have the iteration extension they will continue to have the iteration extension each time. registration. Hence my question: Is there a way to remove this iteration extension to have "classic" files again? (I don't use Windchill) Thanks for your help.   Translated by the Community Moderation using Google Translate ----------------------------------------------------------------------------------------------- Bonjour, J'ai réinstaller Creo 6 récemment. Je n'ai pas fait attention a mes options de configuration et la configuration "save_file_iterations" était sur yes. J'ai modifier mes options de configuration pour ne plus avoir l'itération pour mes prochains fichiers et j'ai bien compris que si mes fichiers

I am using Creo Parametric Release 6.0 and Datecode6.0.6.0Hi, I need help Copy geometry and Publish geometry tab

I am using Creo Parametric Release 8.0 and Datecode8.0.9.0after new installation, logged as Administrator I started Creo Paramertic normally.But whem I am log on as common user, Creo did not start. Only when user is member of Administrators group, Creo starts, otherwise not.

Hello, My company has asked the question if Creo 10 & Simulation Live can be run from the AWS App Stream 2.0 service?The idea is to potentially save on purchasing specific high end Computer Hardware and utilize the AWS system that should technically always have the latest GPU's.Does anyone run Creo this way and how have they found it?Thank you for any input or suggestions. 

I am using Creo 10 and had a Windows 10 update that wiped out a number of my settings, one of them being my weld symbols and dialog box in drawing mode. config.win is directing to the correct folder, but nothing is showing up. I have two pictures attached. One is the weld dialog box before the Windows update and the other is after along with my directory setting.

Last week we upgraded to Windchill 12 and Creo 9.0 with CreoView Adapter 9.1. When we submit a job to the CreoView, the model files (parts and assemblies) publish fine and benerate thumbnails that dhow in Windchill. The drawings do not publish a viewable or a thumbnail. When I open a drawing in CreoView, it only opens a blank page, no drawing. Models open fine and can be viewed and manipulated.

Hello,I reinstalled Creo 6 recently. I didn't pay attention to my configuration options and the "save_file_iterations" configuration was set to yes. I modified my configuration options to no longer have the iteration for my next files and I understood that if my existing files have the iteration extension they will continue to have the iteration extension at each save.Hence my question: Is there a way of removing this iteration extension so that I can have "classic" files again?(I don't use Windchill).Thanks for your help. 

I am using Creo Parametric Release 5.0 and Datecode5.0.3.0We are trying to run the Creo Plug-in for ModelCenter and we are getting an error.Here are the errors that I facedError: Cannot open Variable Selection Form.Reason: Could not start Creo.Error: System.Exception: Got Creo error code:PRO_TK_GENERAL_ERRORat Phoenix.ProePlugin.PTCCADTool.checkStatus(Int32statusMsg)at Phoenix.ProePlugIn.PTCCADTool.Connect()at Phoneix.CADUtils.CADSession.Connect()

When we run ModelCheck, I have it set to check for certain parameter values. This works fine if the value is not in the list or the parameter is not designated to Windchill. With some older files from another design group that we have inherited, the parameter may not be in the file. Is there a method to report that a parameter is not in the file?   These will report if the parameter is not designated or the value is not on the list. PRT_PARAMETER CLASSIFICATION STR EQ LIST_CLASSIFICATIONPRT_PARAMETER CLASSIFICATION NONE EQ PDM   We are running Creo 9.0.5.0 with Windchill 12.0.2.10. ModelCheck files were created with Creo 7, but I don't see any significant changes in the setup files.  

I am using Creo Parametric Release 4.0 and DatecodeM110 I want to set 2 or more directories for formats because of the format version up (in company). Is it possible to specify multiple directories when setting the configuration to read the picture frame file?When the version of the picture frame is updated, I would like to store the picture frame in a separate folder and use it. Currently, only one frame storage folder can be loaded, so even if you save a drawing with a new frame stored in another folder, when you load the drawing again, the new frame will not be loaded and the default Displayed in status.   Translated by the Community Moderation using Google Translate ----------------------------------------------------------------------------------------------- I am using Creo Parametric Release 4.0 and DatecodeM110I want to set 2 or more directories for formats because of the format version up (in company).図枠ファイルを読み込むコンフィグの設定において、複数のディレクトリを指定することは可能ですか？図枠のバージョンが上がった際、図枠を別のフォルダ

Hi all,Any recommendations for a high end laptop for running Creo?Processor speed?RAM: 16G or more?Graphics card?Thanks,Stefan

I am using Creo Parametric Release 3.0 and DatecodeM140Hi,i need a installation for Creo 3 - M140. Can you send me the weblink for the download please?Thank you.

Hello,  I am looking for a parameter in Creo 7.0 how I can avoid to set a working directory to a network share folder.  Kind regards, Michael   

Hey!I have licence problem after installation Creo 10.0 - student version. I start the program and I always recieve a messege: I have to renew my licence. I don't know why, because I used the right code from PTC's website.I've also got a 'txt' file per email (Creo licence), but I don't know exactly, in which order should I copy it after dowload. Thanks for the answers!        

hi,In eSupport it won't let me download the PTC CREO 10.0.2.0 files and an advertising window opens that I can't remove. Why?thanks

Good day,I am encountering a customer if we can run Creo Parametric 10.0 on MacOS via Parallels (similar with bootcamp emulator of MAC to make it windows OS) . We know that Creo has no version for MacOS but once Parallels was used will be there an issue or problem with it still? Let me know also if there is a article case of creo connected with Parallels. Thank you.     

While opening Creo, an error occurred, and Creo automatically closed, please suggest a solution to resolve this issue.   Refer attached screen shot for your ref  

When I try to open creo parameter application in my user unable to open, it is continuously processing. But same application run in administrator working but some features not able to work. kindly help on this issue.