System Administration

I am using Creo Parametric Release 7.0 and Datecode7.0.2.0We have our company drawing format where we want to lock/freeze the format [.frm file] just to prevent editing during the drawing preparation.Here are the errors that I facedUnable to find any such option to do so

I am using Creo Parametric Release 4.0 and DatecodeM050We need to renew the following expiring licenses:NC-PRODUCTION_SETTool_Design_SETThese are expiring in 7 days.Thank you!

I am using Creo Parametric Release 5.0 and Datecode5.0.0.0I recent have a new laptop Dell Precision 7560 (graphic hardware NVIDIA T1200 Laptop GPU). experiencing Creo crashing during save or regeneration models about two weeks ago. The crashing be progressing day of day. At the beginning the crashing happened on different model from time to time. Since Oct 17th it started consistent crashing when tried to open the main assembly model. My Old laptop is Dell Precision 7510 (graphic hardware NVIDIA Quadro M1000M). I tested the same models on the old laptop. It's opened and running very well in Creo on my old laptop. So that means not the model with corrupted or other issue cause the crashing, But something else.

I am using Creo Parametric Release 4.0 and DatecodeM150When trying to create WTPart from Creo using Auto-associate function, it ignores the mandatory attributes of WTPart

I am using Creo Parametric Release 4.0 and DatecodeM100Hello, I recently renewed and updated two my licenses. I used the reconfigure tool and that seemed to work license check mark appeared and license said available. I closed and launched Creo, I had to re-register my server the old one was gone from before the license reconfigure. I put in the same server location and I get the error: server location is incorrect. I still have other users that are signed in using untouched licenses and there server location works works fine. and they can see all the folders etc.

I am using Creo Parametric Release 4.0 and DatecodeM120現在中国でノートPCにインストールしたCREOで作業をしていますが、リモートでサーバーからダウンロードしたモデルと異なってしまいます。ノートPCで呼び出したモデルはデーターベースのステータス項目に修正済みと表示され、日本のワークステーションはダウンロード済みと表示されます。チェックインは正常にされています。PC側で作業するのにダウンロードファイルはどのように変更すればよいのでしょうか？   I'm currently working with CREO installed on my laptop in China, but it's different from the model I downloaded remotely from the server. The model I called on my laptop shows as fixed in the database status item, and my workstation in Japan shows it as downloaded. Check-in has been successful. How should I change the download file to work on the PC side?   Translated by Iuliana Lazar with Google Translate on 25 oct 2022.

license transferOld network card address：6C-62-6D-00-2E-37transfer content：Creo parametric *1New network card address：00-BE-43-BB-EA-2E

I am using Creo Parametric Release 8.0 and Datecode8.0.6.0We are trying to get the license file/server to load the Design Premium Professional first, then load the design essentials licensesCurrently we have 2 floating for Design essentials and 1 for Design Premium Pro the license file is installed on the server and when people run the parametric link on the desktop it loads desin Ess. not Premium. and when you got to use functions under the premium license it fails saying there are no options loaded. even when there is no one having the design premium license checked out. The only way we can get it to run right is to have someone log into two workstations using up the design ess licenses and then running Creo it will check out the premium license and allow us to use the advanced features. Is there a way to add something to the options file that tells it to either choose or pick the Premium by default?

I am using Creo Parametric Release 7.0 and Datecode7.0.5.0I received a file (.asm) that contains an sub-assembly with a icon that I do not know. Similar icon to assembly type, but gray color...What is it? how is it created and how is it modified?

ModelCHECK is telling me that I have views that do not have scale assigned, but my views DO have Default scale assigned. Is VIEW_SCALE working as intended here? I would think that Default scale would count as an assigned scale.  

I am using Creo Parametric Release 3.0 and DatecodeM190license transferOld network card address：6C-62-6D-00-2E-37transfer content：Creo parametric *1New network card address：00-BE-43-BB-EA-2E

I am using Creo Parametric Release 6.0 and Datecode6.0.5.1One of the users is unable to import the word documents inside the Creo drawing. The user is able to import only once when system is restarted and unable to import the document again.

Hello,today I tried starting Creo (9.0.0.0 Student Edition), but it did not work.Also tried running as admin of course.So i decided to uninstall it and reinstall it. Now the setup.exe does not want to start.When i copy the files in a virtual machine (Windows Sandbox), the setup.exe does actually run.I also tried deactivating Windows Defender, but also this did not work.Absolute path is: C:\Users\chris\Documents\MED-100WIN-CD-460_9-0-0-0_Win64Restarted the PC multiple times.All drivers are updated to the newest version.Does somebody know what could have happend? GreetingsSpedex

I am using Creo Parametric Release 9.0 and Datecode9.0.0.0Totally new to Creo. Trying to open up the ability to edit the configuration settings in ModelCHECK (Check Files, Start Files, etc.) so that we can create custom defaults- currently these options are greyed out. Can these settings be unlocked or what is the procedure to accomplish this? Thanks!

I am using Creo Parametric Release 6.0 and Datecode6.0.5.1unable to import word files in drawing.Once i did its going to not responding in creo

I am using Creo Parametric Release 9.0 and Datecode9.0.0.0I am running Creo Installation Assistant. Every time I enter the sales order number under "Node Locked License Generation" in the License Identification section, I keep getting an error message.Here are the errors that I facedError! License request for this SON is in process. Please verify that this has completed successfully and contact PTC License Management if necessary.I saw that there is a support case made on my behalf. But does it usually take this long?

We are planning to upgrade Creo Parametric to Creo 7.0.9.0. Could you please provide what are the main updates in Creo 7.0.9.0 vs Creo 7.0.5.0?   Thanks KB

I am using Creo Parametric Release 9.0 and Datecode9.0.0.0About Model CheckMy model check report is coming up blank.I only use it for overall size of part.

I am using Creo Parametric Release 4.0 and DatecodeM130使用VPN时，Creo无法连接对应的License.提示7788@xxxx （-9）Invalid host.(license服务器所在电脑已开放7788端口)Here are the errors that I faced提示7788@xxxx （-9）Invalid host   When using VPN, Creo cannot connect to the corresponding license. It prompts 7788@xxxx (-9) Invalid host. (The computer where the license server is located has opened port 7788) Here are the errors that I facedPrompt 7788@xxxx (-9) Invalid host   Translated by Iuliana Lazar with Google Translate on 17 Oct 2022

Creo 4.0 There are a couple checks that can be setup to point to another file to compare data. I've had success  pointing to files on a share drive. Since we are connected to Windchill, I would prefer to point directly to our start parts/dtl files stored there. With the current setup we have to maintain multiple sets of files. I've tried pointing to our wtpub directory just like we do for config files and that didn't work. Anyone know if there is a particular syntax or way to point to Windchill for these comparison files? Settings I'd like to point to a wtpub directory. (Let me know if I'm missing any other good ones?) STD_DTL_SETUPTEMPLATE_LAYERSTEMPLATE_DTM_PLANESI did also run into a bit of a snag where the reapply standard doesn't seem to work for my test user account. Though I fear this is a permission issue for the share drive and not Modelcheck related. Though if anyone has experience here, would also be appreciated.

I am using Creo Parametric Release 4.0 and DatecodeM090When you change the parameters of the 3D model, normallyThe drawing parameters are also changed, but the changes are no longer reflected.As an example, I wrote "TEST" in PART_NANE in the 3D model,The "MODEL 50 ID INPUT" previously described in the 3D model parameters remains.The 3D reference has not changed, but once again the 3D parameterIs it possible to reflect the contents in the drawing?

I am using Creo Parametric Release 4.0 and DatecodeM120Hi,We are working on a Creo Toolkit application to traverse structure of a Creo Assembly that contains ~650 objects at different levels in which there are Family table instances associated with ~200 Family tables using Creo 4 or later versions. The total number of instances in these Family tables is about ~5600. We are using the Creo/Toolkit (Pro/Toolkit) APIs to traverse through the structure to retrieve the details of all objects available in the structure including all instances of all Family tables associated with this assembly structure. Do you have any benchmark timing for traversing this kind of a Creo assembly using Creo/Toolkit (Pro/Toolkit) APIs to retrieve information about ~6000 objects? If so, could you please share the information of the appropriate APIs to be used for traversing the Creo assembly structure and also to retrieve the details of all instances in all Family tables? Also, we would like to have a sample pro

I am using Creo Parametric Release 4.0 and DatecodeM110Having issue to find several number of roundoff values in drawing annotation for huge size drawing sheets.

I am using Creo Parametric Release 7.0 and Datecode7.0.3.0Good Morning dear,I'm tryng to use de UDF tool, in assemble mode, to customize a project and the follow message shows:"You have not checked out the license option. Please click "File->Options->Licensing" and choose required option from "Refresh license list".In the part mode I can acess the tool.I'm using a locked license.Here are the errors that I faced"You have not checked out the license option. Please click "File->Options->Licensing" and choose required option from "Refresh license list".

Hello, What is the Creo license model in the case of cloud deployment? We would like to test deploying Creo on Azure VD to be streamed through the browser. Is there a way to configure Azure VD Creo application in order to use the license servers we already have? Currently they are used by users with local copy of Creo. Can location specific licenses be used, do we need to use global ones or is there another type of license required?