Windchill

Version: Windchill 12.0 Use Case: windchillDescription: 我在 .asm的页面可以看到它出现在content 里，但是无法下载 .asm 文件，而且我的权限被允许下载，谁知道问题出在哪，我该如何解决，谢谢！ 

Hi all, I am currently using Windchill Risk and Reliability version 11.1 I have a few questions which I hope can provide more clarity in my work.Currently, I am working to analyse and produce the most optimal RBD calculation options.Scope: I am looking to analyse the availability and reliability of an electrical system in a time span of 5 years (43800 hours).I would like to know the correct and optimal procedure to input my data for my distribution to account for every equipment. Currently, I have used Expontential Distribution settings for respective equipment that have provided in failure rate and MTBF data.  Currently, the failure rate is being included as failure rate per year, whereas the MTBF is shown in years. Q1)Am I supposed to convert the values into Failure Rate Per Million Hours (FPMH)? Q2) Do I need to adjust the distribution into Normal, Lognormal, Weibull, Rayleigh, Uniform. Time Independent or Constant Time variable? Is there a respective settin

I am using Windchill PDMLink Release 12.1 and Datecode with CPS 12.1.2.0How we can handle the exit of employess in an organization. Once the account is deactivated in AD, what will happen in Windchill.

Version: Windchill 12.1 Use Case: I need to export the assembly data with the children to local drive without opening it in Creo or without adding it to workspace.Description: I don't see any option to export from Windchill directly to local drive without adding the assembly to your workspace first. Is there anyway or tool or some method to export cad data from Windchill directly to your local drive? Windchill 12,1

I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.2.3My current PLM configuration is using basic authentication (APACHE, OPENDJ & Windchill PDMLink). I have been requested to use mTLS login and authentication method. mTLS is configured and working. I now need to map Apache mTLS authentication attributes to OPENDJ / PLM user attributes. Where can I find documentation or explanation describing how to proceed ?

Hi,I have mapped some mass properties of Solidworks to Windchill 11.0 M020, but the values displayed are upto 13 decimal points.Is it possible to reduce the value to get only upto two decimal points. If yes, please suggestThanks & Regards,Irfan

I am testing DTI in Windchill 13.When creating a new document from an Office app, the layout is empty and I cannot create the document.Why is the Create Layout f=defined for the document type appear in the UI? --Kirk Wemple

Version: Windchill 12.1 Use Case: How to configure basic auth for test users to register worker and cad toolDescription: In an SSO configured environment if the test users need to login in to workgroup manager and CAD tool using Basic Auth how can that be achieved?

How to configure a worker with basic auth in a windchill sso configured environment.

Hello! I am looking for some help with updating the value of an attribute that exists on resulting objects of a change activity through the use of an expression robot in the workflow of the change activity. The resources I've been able to find all seem to call out the object that's having its attribute modified as the primarybusinessobject, so where I am having trouble is calling to the resulting objects while the change activity is the primarybusinessobject of the workflow. I tried the following, but had the error returned "WTChangeActivity2 cannot be converted to FormDataHolder" wt.change2.WTChangeActivity2 changeTask = (wt.change2.WTChangeActivity2) primaryBusinessObject; java.util.Vector results = com.ptc.windchill.enterprise.changeable.ChangeableDataFactory.getResultingObjects(changeTask);

I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.2.3可视化无法启动 Launching doc2pv in worker modeLaunching sw2pv in worker modeLaunching doc2pv in worker modeLaunching pvsthumb in worker mode

Version: Windchill 13.0 Use Case: I need to hide the CAD Document attribute SAP_MATNO dynamically based on context in the windchill UIDescription: Windchill Version: 13.0Object Type: CAD DocumentInternal Name: com.trw.ssc.DefaultEPMDocumentAttribute: SAP_MATNO (IBA)RequirementI need to hide the CAD Document attribute SAP_MATNO dynamically based on context in the windchill UIExpected behaviorWhen the CAD Document is created/edited/viewed inside the container named “Training”, the attribute SAP_MATNO should be visible in windchill ui.In all other containers, the attribute must be hidden in windchill uiAdditional requirementThe logic must work consistently across:View information pageWhat I’ve triedI implemented an AttributeDataUtility class to check:The attribute nameThe CAD Document type (com.trw.ssc.DefaultEPMDocument)The current container (resolved via NmCommandBean + TeamCCHelper)Then the utility sets:attrState.setVisible(false)attrState.setReadOnly(true)attrState.setValue(null)

I am using Windchill PDMLink Release 12.1 and Datecode with CPS 12.1.2.19在任务详情页面中，操作下拉列表部分被隐藏，看不到重新分配选项

It should be possible to delete latest iteration of multiple WTParts in bulk in Windchill PDMLink.

I've been asked to run some dependency scanning on existing repositories. From what I can tell, scanner is looking for pom.xml where we declare the packages were we reference. I know Windchill itself is based on a number of open source packages but cannot seem to find that. Is there a list of this anywhere?  I kept getting directed to the Release Advisor. Not sure what I was looking for was listed there. 

Under a custom tab I have created on a part, I have included the "Part Instances" table (accessed via the "Customize" button when the tab is selected > General). I would like to include a custom attribute in this table view to compare the attribute value against all part instances included in the table. Does anybody know if this is possible?

Hi There, We are planning to move from Windchill PDM Essentials 11.1 M020 (since this has no more support since January 2023)  to   Windchill PLM 12.1.2.1 We plan to provide/implement a "Disaster Recovery" during this fresh install/upgrade Is there any document to guide us through the exact steps + the architecture involved in this? We intend to use a SQL Server database and the in-built HTTPD web server. Thank youRaj    

Version: Windchill 13.0   Use Case: After Revise the new Rev isn't showing as latest Description: I am testing an upgrade to Windchill 13 and have this weird issue where after a Revise, the new revision isn't showing as latest.  Anyone with any ideas?    

Version: Windchill 12.1 Use Case: Need to delete old representations. DeleteRepUtil could be used, but how to find the input OIDs for it.Description: Does anyone have a report or query to list "Copied from" representations on EPMDocuments and preferably their OIDs to be used as input for the DeleteRepUtil on the server? I'm looking to delete also old "Derived from" to restore disk space and there's some handy report provided by PTC, but I noticed that didn't pick the "Copied from" (which would be more important to get rid of as it's incorrect data on the object..). We use WTParts, just mentioning as I learned that may affect how the reports work.

Hello,I am working on an integration project and I need to perform the following actions using Windchill OData REST APIs:Create a new WTDocument.Update attribute values (IBA/Soft Attributes) of existing WTDocuments.Link (Associate) the created WTDocument to an existing WTPart (e.g., as a Described By or Reference link).Could you please guide me on which standard Domains (e.g., ProdMgmt) and Endpoints I should use for these specific operations? Is it possible to achieve the linking process within the same transaction or does it require a separate API call?Any examples or documentation references would be appreciated.Best regards.

Version: Windchill 13.0 Use Case: How to export structure report with cad documents? Including level information? Multi-level report. If it is via custom table builder with custom action . Guide me how to achieve this. If you have any implementation , it would be great if you can share?Description:  

Version: Windchill 12.1 Use Case: For one context, the users do not need to see a few document sub-types or a change type. Hide that option from just that one context.Description: I have solved this before with an OIR for that object that calls out a none existing Lifecycle. It has worked but now for some reason, It does not. Granted, I do not understand HTML so perhaps I have this formatted incorrectly.<!-- set the lifecycle --><AttrValue id="lifeCycle.id" algorithm="com.ptc.core.foundation.lifecycle.server.impl.LifeCycleTemplateAttributeAlgorithm"><Arg>nope</Arg></AttrValue></AttributeValues>

Wondering who has implemented this?I did at one med device to allow pre-production CAD items to be promoted to Production when no data had changed if they provided appropriate supporting (validation) documents in the change. Why:Forcing a revision creates work that is not needed for the data authors and approvers.We use the same rev scheme and we can watermark / stamp (cover page) to show the effectivity and state.

Is it normal that Windchill does not consider Object Initialization Rules (or Access Control List) at all when creating parts with edit associations or auto associate? Or do I just have some kind of configuration issue? I have hidden some subtypes of parts in different organizations and contexts from the part creation drop down menu by defining a non-existing lifecycle template in the OIR of those types that I want to hide.When I'm creating a part in Commonspace or Workspace, the OIR is checked before showing what types I can create and the dropdown list of type selection filters out the ones that I cannot create:  But when I'm using "Edit associations" or "Auto associate" on an existing CAD document, it seems that Windchill just shows *all* subtypes which have "Instantiable" flag on and doesn't consider the context-specific OIR.Auto associate: And same thing with "Edit associations":  I can create and associate any of those types of parts in Workspace. Bu

Hi.Is it possible to add Standard or Global attribute fro WTUser?In my case only Alias and Calculated are available.Thanks.