Windchill

Version: Windchill 11.2 Use Case: I want to roll back a drawing revision.Description: Using Creo 10.0.8.0.  We created a drawing weeks ago and assigned a number at rev _-. Checked the drawing in but never released it. Engineering decided to change the part number and when I renamed it, the number change was accepted but the rev level seemed to auto-advance to _A without any prompting from me to do so. The only way I can see to get back to rev_- is to delete the drawing and start over. Is there another way to do this? I have this same problem with a couple of other drawings that had been released but not signed off by everyone (so not 'officially' released in my organization) and now there is a part number change required for those drawings that should not necessarily require a revision either. What seems like not so many years ago (to me), this was a drafter level function, pull down tab and you could go backwards if needed.  Any ideas? Thanks.

Version: Windchill 12.1 Use Case: Version: Windchill 12.1 Use Case: We are trying to Extract Windchill As-stored BOM Information from Windchill DB, We are not finding the child information instead of same parent information is repeated equals to child rows.Description: Version: Windchill 12.1Use Case: We are trying to Extract Windchill As-stored BOM Information from Windchill DB, We are not finding the child information instead of same parent information is repeated equals to child rows.Please check attachment for the query used and the result.

Hi everyone,I’m currently working on performance testing with a load balancer using JMeter integrated with Windchill. I’ve been following the article provided by PTC, but I’m unable to download the EDCCadMultiUser.jar file mentioned in the instructions.Could anyone please guide me on how to download this JAR file or share if there’s a more recent article or updated link available?Thanks in advance for your help!

Version: Windchill 13.0   Use Case: Classification of multiple documents from Desktop Integration Description: Hi everyone, do you know if with Desktop Integration, when you select multiple documents from local and drag them into Windchill, it is possible to assign the classification immediately in the interface? The same behavior that happens for the selection of the softype would be needed, which is rightly always the same for all documents dragged in that operation. At the moment it allows me to assign it only if I do it for one document at a time.     The attribute appears in the column selection but then you don't see it ty,Matteo

Version: Windchill 12.1 Use Case: Based on object affected (type, state, attributes) and the selected end state, the change process automates a minimal list of required roles/approvers.Description:  Wondering if this topic has already been covered?I have seen customization that checked that a given set of Roles in the change process were populated based on affected objects (type, state, attributes).I have also seen the use of a questionnaire with cascading additional questionnaire to define the change process path and approvers. 

Version: Windchill 13.0 Use Case: Republish is not working - Publish will work only when we do check in and check out. Windchill version is Release: 13.0.2.6 I checked online and tried adding below lines to xml. OR · It says our Windchill version does not support on="republish" or on="manual-post" in publishrules.xml. You cannot fix this by editing XML. To get PDF/STEP on republish, you need either: A check-in/schedule trigger, or A custom workflow/JPO that explicitly calls the publishing API. <publish on="manual-post" additional-files="publish_drawing"/>OR<publish on=" republish" additional-files="publish_drawing"/>Description: Attached xml file used. Ca you help on this. 

Version: Windchill 12.1 Use Case: Our users want to use the WRS via scripting to create relationships with WTDocuments like those available in the UI.Description: We used Article CS285572 to implement WRS customization that allow users to create WTPartDescribeLink between WTPart and WTDocument using REST Service(OData).  We need similar directions for WTDocuments so that our users have the ability to create the same relationships with WTDocument via REST that are available in the UI.       

Version: Windchill 13.0 Use Case: I have created a custom API to create Option, Choices and option set by providing respective inputs. I have observed that, after creation, option has been persisted in Windchill with linked choices. Also newly created option set is associated with specific container. So far it is fine. However I am looking for custom API to link Option Set with Option. Can anyone help me on this ?Description:  

Is there a api which lets us add multiple users to single role. 

Reference topic: https://community.ptc.com/t5/Windchill/Limited-access/m-p/582062#M58429   Is it still possible in Windchill 12.0 to change the domain of a folder? When I edit a folder (by right clicking it -> Edit) I don't see the 'Domain' attribute. I'm logged in as a site administrator (but not the default wcadmin if that matters). Or maybe there's some preference/property required?   Here's how the Edit page looks like for me:  

Version: Windchill 13.0 Use Case: Expand fields of search for PSB action Replace with ExistingDescription: We would like additional search fields for the following PSB action Replace with ExistingWe can do this for the Insert Existing; but not Replace with Existing. Based on our research, the following was observed: The Replace With Existing action search window is implemented with a search UI which is tightly coupled with OOTB AdvancedReplacementAddPartAction class, which we we were not able to add custom IBA as search criteria field.  Is there a way around this limitation? 

Version: Windchill 12.1 Use Case: At the time of migration, we have used few attributes which are used at the time of migration, now they are not at all needed, Since there are many, we need to delete in Bulk.Description: At the time of migration, we have used few attributes which are used at the time of migration, now they are not at all needed, Since there are many, we need to delete attributes in Bulk from.SoftTypeManage Reusable Attributes.

Version: Windchill 13.0 Use Case: Currently i using windchill 13.1.2.0 version Based on creo view adapter 12.1.0 Microsoft Office 2019 , 2021 , 2022 ,2024 and 365 is it supported OS version 2019 and 2022 ?Description: Currently i using windchill 13.1.2.0 versionBased on creo view adapter 12.1.0 Microsoft Office 2019 , 2021 , 2022 ,2024 and 365 is it supported OS version 2019 and 2022 ?

Hello to everyone,I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.2.19 I'm making a query that extract a specific Bom in a specific version and View (ex. manufacturing View).I need to know in wich table of the Database there is the View Part information. I need the manufacturing view. Can someone help me? thanks.

What is the use of Record Variable Changes property in Workflow?  

Version: Windchill 13.0 Use Case: I have to do a mass update of the "Default Trace Code" attribut that is located on the Part Master.Description: typically use the LodFromFile utility to update attributes on WTParts and WTDocuments. To do this, I first create a CSV file following the format outlined in [Windchill_Home]/loadFiles/csvmapfile.txt. I then convert the CSV file into an XML file using the csv2xml utility.Currently, I need to update the "Default Trace Code" attribute across multiple parts. However, I haven't found any documentation or guidance on how to create a suitable loader for Part Master attributes.

Version: Windchill 12.0 Use Case: Article - CS365094 I followed for QML report for the lists of all the object types in Windchill.Description: Hello Team,I need QML report for the lists of all the object types and usage description in Windchill.

I am using Windchill PDMLink Release 11.0 and Datecode with CPS M030-CPS19问题：取消protocolAuth配置联系人：余民军手机：19170373592邮箱：yumj1@chint.com

Version: Windchill 13.0 Use Case: We use ESI to transfer data to ERP, flat xml transfer of the changed data.Description: Problem is in analyzing and restarting the ESI/ERP Queues. Where can i find the right queue and how do i restart this, or re-offer/restart processing the xml's.(and why might they be stuck in pending mode, in the q).This doesn't seem to be in utility's > queues management but a different gui/control in Winchill? Any documentation or advice would be great, thanks. 

Version: Windchill 13.0 Use Case: what version of Solidworks does Windchill+ SaaS PLM supportDescription: what version of Solidworks does Windchill+ SaaS PLM support

Version: Windchill 12.1 Use Case: Mapping of attributes from CAD drawing (Assosiation: Calculated)Description: We have different parameters/attributes defined in the CAD and in the Drawing - The attributes are mapped to the WTpart, but are only synced from the CAD part (as it is associated as Owner). Association: Calculated does not show up on any of the lists of mapping options.  Is it possible to set that the attributes should be mapped from a "Calculated"?Is there another workaround (besides putting all the attributes/parameters in the CAD)? 

Version: Windchill 13.0 Use Case: I would like to hear from anyone able to meet data sovereignty requirements for multiple countries working in the same global implementation.Description: For some industries, there can be requirements for certain data to not leave the country. In a global implementation a data sovereignty requirement can apply to more than one country while the Windchill server can only physically exist in one. Meaning certain data from some countries can never be managed using Windchill. Theoretically if an organisation defines "data" as only files (so not including meta-data), by using correctly configured security labels in combination with vaulting rules, data/files always stay in country. I don't want to get into a debate about what "data" really is, that is a discussion for a legal compliance team. I want to hear if anyone is successfully doing this at their organisation, if so are they able to share any challenges they had to overcome to get things imp

I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.1.2what is the format for the CSV file to use with LoadFromFile when I have 10 or more documents to load. I can load a single document ok but not when adding another document to the same csv file. file will convert to XML ok but not load?? CSV & XML files attached. MS log as well

In Windchill 11.0 M030 version, since it is necessary to receive from other systems through interfaces, sample code related to the addition, deletion and modification of classification nodes and classification node attributes is required. After checking, I learned that in Windchill11.0 version, there is no supported API for direct operation.

Version: Windchill 12.0 Use Case: Need to append string at the start of the subject line.Description: I have been trying to add string at the start of the subject line and it is working for General.html and NotificationRobot.html templates. ex: my email subject look like this:  Custom String + Analyze Problem Report Now trying the same for templates  ApproachingDeadlineNotification.html, CompleteNotification.html, OverdueNotification.html and it is not working. String always attached at the end of subject line no matter what.  In screenshot attached see "MY STRING" is at the end of subject line.  <html><body><table border="0" cellpadding="3" cellspacing="0"><SCRIPT LANGUAGE=Windchill>getPJLNotificationTitleRow</SCRIPT><tr><td align="right" valign="top" nowrap><font face="Arial, Helvetica, sans-serif"><b><SCRIPT LANGUAGE=Windchill><!-- getDeadLineLabel resourceKey=D