Windchill

Hi All,I am trying to add a checkbox "Create AML Part" in the create new part wizard (as shown in the image)I have also created an additional wizard step which should appear after this checkbox gets ticked. The functionality is similar to the working of "Create CAD Document" checkbox. When I click on the checkbox, I want the "Create New AML" step to appear and rendered when I click on the Next button. How do I do this?Thanks in Advance.

I can't get Creo View to work in the Chrome browser after following PTC instruction on their support website. I'm on Windchill 10.2 m03 and CreoView 3.0, any help on work arounds.Also does anyone know how to have shrinkwrap parts show up in Creo View.

I was asked to grant a read-only access to contents in a single folder (and its sub-folders), within a product context to which this particular user does usually have access (they're not part of any team that has access to this product context).Is that feasible?  And if so, how do I go about doing this?I tried to use the "manage security" function and have granted "Read" access to this user / group, but now I don't know how they can navigate to this folder and add objects to their workspace etc...  - in other words, the product context does not show up in their list of places to browse...

Anyone used Rehost Utility 3.0 and do you have documentation, instead of using PTC documentation? Thanks,

I have 2 users user1 and user2 who have access to doc1.I have denied access to user1 by applying Deny acl on doc1;but when I use user2 and send the document to user1 for review/approve;user1 has access to this document from his task page.How do I prevent user1 from getting access to this doc at all.

We have a oracle 11g R2 DB around 100 GB with Windchill PDMLink10.2 M030. Need an estimate of the data migration time needed for TEST and PROD environment conversion ?

Attempting to install.  Can't figure out what software download it's looking for for Service Pack - please see attached.  I've installed Windchill many, many dozens of times - never ran into this before.

Hi All,Can some one provide me an SQL query that will list all WTParts in the system along with the folder they are stored in.for example a test part: 0000000123 is stored in GOLF_CART / New_Folder/New_Folder2/New_Folder3 location. Query result   Part Number      Location                     0000000123       GOLF_CART / New_Folder/New_Folder2/New_Folder3

According to the software matrices,FlexPLM is supported on RHEL 6(64bit).So, wondering if the support is extended with RHEL 6.9(64bit)?

How to export a document (WTDocument) structure, including content and attachments. The OOTB export from the document information page provides a zip with xml and content (including attachments) for the primary document but NOT it's children. Is there a way to expand this to include children and their attachments?

Hi, I am trying to explore the Change Promotion utility in Windchill 11. Can someone please share your experience in it?

Hello,Currently, the auto-numbering kicks in and renames all components according to the auto-numbering scheme when opening a 3D model in CATIA that is not saved in Windchill. I would like to delay this action until the 3D model is saved in Windchill. I came across this preference in Windchill 11.0 that seemed to be what I need, delay.autonumber.generation which allows you to switch behavior and delay number generation. Does anyone know if this setting is available in 10.2 and if yes, would it change the above behavior to what I want? If not, is there an alternative way to do it?Thanks much in advance!

Is it possible add to the action menu on clipboard the action "Add Download document to compress file"Thank for any helpBeniamino

I have parts updated with wrong Effectivities applied, and i want to remove those applied effectivities bulk using Info*Engine task, is there any tasks to remove effectivities?

I have a running promotion request that I need to abandon or stop so that I can replace an approver with another approver.  My thought was to simply abandon the running workflow and start over.

In WINDCHILL Real number Attribute showing in the object detail page 14 place decimal scientific notation. How can I display 3-digit decimal standard after decimal for WEIGHT ATTRIBUTE IN windchill as Type REAL NUMBER??.

We are actually a chemical company, but it occurred to me that some practices for managing a software type product might apply to us (in part) rather than a typical manufacturing environment. Actually there are two things that could be managed: The architectural/electrical construction drawings for building the process buildings and equipment for making the chemicals (not mass produced) and the actual chemicals themselves that are mass produced.Any suggestions?

Hi,we are using DTI and mapping attributes from PDMLink to Word or Excel.One of the attributes is a Temperature and measurement unit is defined in "Celsius".The attribute value and the corresponding measurement unit is displayed correctly in PDMLink.However, when mapping the attribute to Word document, then the value is converted into Kelvin and the measurement unit is shown as "K".According to PTC support this seems to be spec, and they asked me to create a product idea.How can I create the product idea?User would never accept the temperature in Kelvin and therefore I need to apply a workaround for this, but on the other side I want PDMLink to improve.Kind regards.Tom

Hi,How can we get the workspace/s of a particular user from Info*Engine WebServices ? Is there a way by querying the Info*Engine WebServices with criteria and typeReference or any other.Thanks in advance.

Some users got this message when trying to start WQS 10.2 M060"Recordset 'Relex.DocumentModel.Recordsets.ProblemRecordset' failed to open".How can we solve this problem?

Hello,I am working on project and shared few cad files from product to my project. Now I see Out of sync share error for shared files. I tried updating project folder and updating selected shares options, couldn't get rid of this. Any other ways to get latest files in my project?

Hi..I would like to know prerequisites to understand the customization in windchill..could you please help me with this...??Regards Madhu.

How do you work with Windchill?We are configured to have WT parts the same number as the CAD part for integration with SAP. Currently the auto associate function does not create a WT part that is the same number as the CAD part and we are told to rename the WT part to match.Is anyone else dealing with this situation?We work in CAD parts all the time and some functionality in pro will be more difficult, like rename in an assembly, if we have to create WT parts first.Let me know how you work with WT parts, thanks

For only some users, for a CAD Doc in a workspace or in commonspace, selecting the viewable image from within the browser inside CAD (either Creo Parametric or SolidWorks WGM) results in nothing.  Actions, Open in, Creo View is grayed out.  For other users, this works perfectly.No help from tech support on what may be causing this difference.Ideas?thanksshown below is on my machine which works - for others, no effect from selecting the image and Open in Creo View is grayed out.

Do the CAD part to be revised / iterated when classification update