Augmented Reality

I have an experience with multiple views.  Each view has multiple buttons that call different functions (all of which work as clicks) I am adding the voice commands for the Hololens and I am wondering if it's possible to have 1 voice command defined but have it call a different function based off of which view it's in at the time. Is this possible? I am assuming with js it is but I am not sure how.   I.e I have a Confirm Tare button and a Confirm Weight button on 2 different views.  Each button will call a function that handles visibility of the next button, within their respective views. The service isn't exactly the same, only because of studio ID's of the components in each view.    thanks!

Hi guys,   I am building a demo. I wanted to see if I can capture the instructions for each step through the audio when I record each step.   Is there such a functionality in Expert Capture yet? Or do I have to manually type the instructions for each step in the editor to export it to the Word document?

Hello, I'm working with Vuforia Capture to create a small procedure for demo. I've seen in other Vuforia Capture examples, that the thumbnail of the video would automatically start playing when you move to that work step, and when you opened it up, the video would pick up where the thumbnail had left off, and begin playing the audio.   Looking for guidance on how I can set this up through the Vuforia Capture Editor.   Thanks in advance.

I have an application where I'm reusing a popup (There are 4 different buttons that cause the same popup to be displayed). Each time the popup is displayed, I'm clearing out any data that was in it, but I can't figure out the syntax to un-check a checkbox. I've tried .checked = false or .selected = false but no luck. Any suggestions?

Hello guys,   I want to record my first procedure with Vuforia Expert Capture. I am an administrator user on the Vuforia Studio Admin site.   I have Vuforia View installed on a Halolens 2.  I tried installing Vuforia Capture but in my Microsoft Account it states that I own the App but I cannot open it. It does not allow me to install the application.   What am I doing wrong?  I can't figure out why I can install the App.

The Portal Login/Auto-Configure option within Vuforia Studio is designed to help Trial users  configure their Studio instance with their assigned Experience Service and ThingMarks.    Corporate networks may block communication to the Vuforia portal or the assigned Experience Service.  If you receive any of the below errors, follow our the resolution steps in our Knowledge Base article Vuforia Studio failed connection issues Auto Configuration failed and get message to Check log for errors Error: connect ETIMEDOUT <ip address> Error: read ECONNRESET If a proxy is in use on the network, it must also be configured within Vuforia Studio as Studio does not  inherit browser proxy settings. A protocol must be used when defining the proxy URL within Studio. Proxy configuration can be done on the Settings menu option.      

PDFs can be linked to experiences using a few methods. Below is an example of using the toggle widget or a toggle button to open and close a PDF within your experience.          Example of JavaScript code to add to Home.js file: $scope.toggleButton = function() { //if the toggle is pressed if ( $scope.view.wdg['toggleButton-1']['pressed']==true) { window.location='app/resources/Uploaded/%5BBD-Logbuch%5D20190208-20190310.pdf' console.log($scope.view.wdg['file-1']['url']) } //unpress the toggle button after 1,5 sec $timeout(function () { $scope.view.wdg['toggleButton-1']['pressed']=false;}, 1500); }      

Hello Roland: I browsed your experience using this link: https://mrerot7o.studio-trial.thingworx.io/ExperienceService/content/projects/bla/index-desktop.html?expIndex=0#/Home  but I can't browse my experience: https://pp-19102315304c.portal.ptc.io/ExperienceService/content/projects/YPF2/index-desktop.html?expIndex=0#/Inicio. My Vuforia project is "YPF2" and my initial view is "Inicio". My Default Experience Service URL is http://pp-19102315304c.portal.ptc.io:8080, and my Thingworx Composer is at https://pp-19102315304c.portal.ptc.io/Thingworx/Composer/index.html  Can you give me some help? Thank you   Related post

I have created a step-by-step sequence in Creo Illustrate and attached an annotation to one part to test out the feature's functionality. The annotation is visible in the Creo Illustrate preview, but when I transfer over to Vuforia Studios with the respectable files, it does not show up when I try to preview my AR project. I've heard that Vuforia Studios does not support the annotation feature from Creo Illustrate. My question is, does anyone know of a workaround specific to what I want to achieve? (Goal: give instructions on proper disassembly of my object/model for each part. This will be so for each part associated with the model)

  javascript   ItemList = [{"checked":false,"title": "title0"},{"checked":false,"title": "title2"},{"checked":true,"title": "title2"},{"checked":false,"title": "title3"}];   $scope.app.params["ItemList"] = ItemList;     I made 2D Widget   Left Panel  + repeater    + checkbox   i bind ItemList to repeater   checkbox Label is {{item.title}}    it's well display title   i bind ItemList to checkbox Value   and How to write Add Filter?   Can I Change CheckBox Value By DataList   Filter Body return (  HowToget( item.checked ) === true ? true : false )          

does anybody knows how to stable the image target to not blink or shake while we are seeing with vuforia view? yes, I already checked "extended tracking" "persist map", but still instable.

Can we do multi Y-Axis (In this case i would like to show level and salinity in the same graph on y-axis , timestamp on x-axis)in properties, i think it can'tAre there any trick?  

Hi all,   We have Vuforia licensed service with 100 Thingmark. Could any one tell me how to use 100 thingmarks in vuforia studio ?   Regards, VR

Hi,   I want to connect a new project in Vuforia Studio with the Azure cloud. Therefore I have to install ThingWorx (TWX). According to an other questions in this forum, it is impossible to connect TWX trial version to Vuforia Studio (trial version). Is it possible, that I copy the data from the azure cloud to a server or save them local and connect the project to those data, just using Vuforia Studio?   Thank you

Hey, according to this, it is not possible to connect the trial version of Vuforia Studio with the trial version of ThingWorx. Is this correct? Post: https://community.ptc.com/t5/Vuforia-Studio/How-to-connect-vuforia-studio-Trail-with-thingworx-foundation/m-p/582829#M4698   Thank you

Hi,   I have created the mobile experience using the Vuforia studio and Published it into the "Default Experience Service URL". Now I have installed the "View" app in my andrioid mobile and provided the Default Experience Service URL in URL section of Settings page. But in Library-->Studio Experices section I can't find the my published experience. Please suggest. Thank You!    

Hello,   I'd like to know if it is possible to view the same Vuforia experience simultaneously on multiple different HoloLens headsets? Will the experience be loaded as separate instances on each device, or is it possible for one person's real-time actions to be seen by the others viewing the experience?   I would also like to know how to share an experience across different types of devices, as is demonstrated in the experience shared between a HoloLens and a tablet in the following video from PTC's website:https://www.ptc.com/en/products/augmented-reality/vuforia-microsoft-hololensThanks

Hello, I am new to the Vuforia studio and would like develop the 2D eyeWear project using the Vuforia Studio. Can you suggest me the reference document or article for the same. Thank You!

Hello everyone,   I am developing an 2D Experience where a list of files of a "fileRepositoryThing" is displayed. When clicking on one of the items the file should be downloaded. For that I use the GetFileListingWithLinks of the Repository Thing. When clicking on a item the link is displayed in the "file-Widget" (Remember: 2D widget) and by clicking on the link the file should be downloaded.   This works for all file-types for the Experience Preview in the Browser. But when using this experience on my phone, pictures can not be correctly downloaded. When trying to, I get the following window:   PDF, Excel and so on works on the phone.    A simple scenario looks something like this:   Any Ideas what could be the reason for that? I also tested that on a colleagues phone and it didn't work as well.   For your information, the structure of the link is something like this:https://mythingworxServer/Thingworx/FileRepositories/myFileRepository/myFirstF

I've been trying to change the background of my chalk widget depending on if my model has loaded. I've been able to write the css to put my icon in instead of the default. However I can't get the json code to change it.  CSS: .twxChalkIcon { background: url(#{$resources}/Uploaded/Support32x.svg); } .gray{ filter: grayscale(100%); } JSON: $scope.modelTarget_acquired = function(){ $scope.view.wdg["image-3"].class = 'buttons gray'; $scope.view.wdg["chalk-1"].class = 'twxChalkIcon gray'; }   Change the class on the "image-3" widget (an image) works just fine, however the chalk widget will not change. If I enter twxChalkIcon gray into the Class property manually it changes to gray no problem.

Hi, Earlier i did installation for http protocol without SSL. and now want to configure self-sign certificate to vuforia ES server. so please can some one guide how to configure it.   I have created self-sign certificate i.e. server.key, server.csr and server.crt and want to configure.   I have modified configuration.json and modified below parameters as, "httpsKeyPath": "./cert/server.key","httpsCrtPath": "./cert/server.crt",   "proxies": {"0": {"target": "http://<Thingworx server IP>:8080/Thingworx","autoRewrite": true,"protocolRewrite": "http","secure": false,"appKey": "f034e968-6abf-4f3d-ae78-98f8a122711f","blacklist": {"file": "proxyBlackList.json","redirect": ""},"changeOrigin": true}   and restarted start-es.sh but not seems working.   - Prashant pandarkar 

Does Chalk presently support the Samsung Galaxy Tab Active2 tablet, I have a customer that says it does not?  If not, when will it be supported?   Kyle

Hi folks-- This is primarily aimed at PTC support folks. We have suddenly stopped being able to publish to our Vuforia experience server (PTC-hosted). Everything was working last week, but now we can't publish. We get 403 errors, "Insufficient permissions to access resource". We are able to log into Thingworx Composer and seem to have all the correct permissions there. It seems to be something between the ES and Thingworx that's broken. We need to get this fixed as soon as possible, because we need to be able to publish and test demo experiences for our customers. @ytella or @tmccombie can you help get this resolved please? Sorry to ping you directly like this, but apparently this is the only route for tech support available to PTC partners, and the need is urgent. Thanks!

Hi, Can any one suggest me the possibilities to add voice command to RealWear HMT-1 device using Vuforia Studio? If yes, is there any user manuals to create the project using the voice command? Please suggest

Hello, I am trying to rotate a model I have across the Z rotational Axis.     I was using the following code to move the model around the movement axis, but am not sure what i have to change to move it along the rotational axis.   Please help!   $scope.Rotate = function() {$scope.view.wdg['755OM'].z = 0.35;}