CAD

Hello everyone, I created a component in 3D, and then created any simplified representation, such as NO-A, N0-B, and then saved it. Then I created a new engineering drawing and selected a simplified representation such as NO-B, but the repeated area still shows component B. How can I solve this problem? Thank you  --------------------------------------------------------------Translated the topic from Simplified Chinese to English using Google translateSubject - 工程图简化表示不起作用Body - 大家好，我在3D建立一个组件，然后建立任意一个简化表示，如NO-A，N0-B，然后保存，接着新建工程图,选择一个简化表示如NO-B，但是重复区域还是会显示元件B,请问这个问题如何解决，谢谢-By Community Moderation Team--------------------------------------------------------------

I am using Creo Parametric Release 11.0 and Datecode11.0.2.0Why is the next version of Creo 12.4.0.0?

Hi, I have a parameter called cage_code. I want the blank cage code in the bom column to read 96906. I have another parameter called part_number. I want part_number MS51959-15's cage code to read 96906, which is currently blank. I saw a tutorial on Youtube that showed the following relation that worked: IF asm_mbr_part_number=="MS51957-15"asm_cage_code="96906"ELSEENDIFThis looks pretty straight forward and looks like it will work. Why does it not?Do I need to do something to the cage code in the bom that reads &asm.mbr.cage_code? I tried something like &rel.asm.mbr.cage_code. That does not work. Please help. WayneF

Error message when entering PTC permanent licenseReboot attempt on wrong systemI have confirmed and the system data is correct, but the message continues to appear when entering the key

We want to export multiple Creo drawings to PDFs that are in a windows folder. I am considering to export using Excel based VBA macro. I combined the sample macro provided as a part of installation, Async_Mode_Example.xls & the VBA code provided at https://www.ptc.com/en/support/article/CS141963. When I run the macro it fails at model.Export line. The error thrown is pfcExceptions::XToolkitNotDisplayed. I am stuck and not able to proceed. Please help. Let me know if additional information is required. I tried with Creo7 & Creo9 but still I see the same error. 

Have an imported STP file.  Using the IDD repair too, have selected Repair, Fix Tangency option.  Seems to  just make it worse every time I run it.  End up going from 7 'Bad 2 side edges' to 141.   Can someone point me in a direction to solidify this part?  Path of least resistance, hopefully.  

Hi,I am currently working on creating an interface between Creo 9 and KISSsoft. I am following the manual provided by KISSsoft (2023) to complete the necessary steps, but I am encountering difficulties. Additionally, the information available online is quite limited, which makes troubleshooting challenging. (I have tried all three variants from the manual) Issue: When I click "Create New Gear" in Creo 9, an error message pops up. The message refers to Applisoft, which I´m have also contacted. However, when I check the specified folder, there is no such file present.If I create a file with the suggested name and then click "Create New Gear," nothing happens — not even an error message anymore. So what is wrong? Also this text is in the Creo console: (Nothing there is linking to the Folder above) Or is there a specific procedure I should follow to make this work (e.g., opening certain files first, executing specific steps, calculate a gear first, etc.)? Thank you

The bug is present in Prime 10 and Prime 9 (can't test with P8 and P7). Its not present in Prime 6 using the new engine! Prime 10 & 9:   Prime 6 with new engine (FriCAS/Axiom)   I hate to say it, but the very same example also fails (in a different way) in Mathcad 15 with muPad as engine, too 😞 Prime 6 sheet attached  

Hi everyone,  I'm struggling to write a program in mathcad ... I have A , C  points each one of them has its own x and y coordinate as showing below... what I need is to. 1) compare the two arrays2) choose the nearest point in A to C 3) calculate the distance between the near pointsfor example if A1 is ( 2, 3) and A2( 10, 30) ...and C1  is ( 6, 4)  and C2 ( 2, 7) .... the program will choose A1 for both C1 and C2 since A1 is nearer to them then it will calculate d1 =( A1^2+C1^2)^1/2 ,,, d2= (A1^2+C2^2)^1/2I'm using prime 9 Thank you in advance Yusra

I am having trouble with using the spring idealization in simulate. We are on Creo 9.0.8.0. I read through the different PTC resources and have tried a variety of different tactics to see if I could get a model that makes sense. At this point, I think it has to be a lack of experience/understanding on my part. I attached the files I could. I am at the point now where I will probably just create a surrogate material with the properties I need to continue, but I would like to understand where I am going wrong. I used Spring point-point pairs where the point is on the surface of the model. Tried constraining the points to be rigid and leaving them free. Tried "burying" the point inside the material. Tried using holes in the material with the points centered on them with both rigid and free connections. We tried to go through our reseller to have their consultant help, but unfortunately that guy had some recent medical trouble and is unavailable. Any help or advice would be great

Morning,I was using the free trial until the order was processed. The order has now been processed and I have received the PTC licence pack but cannot install it.

For my master degree education at Riga Technical University

Hello, I would like to know if it is possible to measure radial forces, axial force and moments acting on beam.I' ve been trying to achieve it by compouted measure but than quickly realized that moments which also acting on the same beam completely ruins the result of a calculations. Example:How can I measure radial forces and moments acting on a beam so at the end i can draw two vectors of forces and moments?Example model is in description. Idea of example model is following: model has known forces and moments acting on the middle of the beam(they are given by load case). Measures has to measure the same values given by loadcase.  1N in X, 1N in Y, 1N in Z, -1Nm in X, -1Nm in Y and -1Nm in Z 

Hi Folks, The 'Chart Component' plot assumes an X range of -10 to 10.  When I zoom in on a plot, it doesn't recalculate so Delta-X doesn't change.  Curves are sometimes longer smooth (example below).  It seems like there should be a way to recalculate a plot after zooming in, but I don't see anything.  Am I missing something? Thanks for your attention 🙂 Mark    

While working in Creo, I see that the “view change” window opens every time in the assembly parts we open in the Windchill system, which I share as a screenshot below. Although I have corrected the errors in the system, this screen appears every time I open the assembly file in Creo. Actually, I found the solution to the problem, but I want to know what the root cause of the error is. In which error situation this screen appears. Can anyone write if they have information about this subject?

Hello, is it possible to create a flat harness with wires that are not in direct contact?As in picture 1, it is composed of separate wire. the problem is when I decide a start point, I can not go and look for another point on a non-attached wire.I would like to know if it is possible to do everything in one flat harness or if it is necessary to separate each wire that does not touch into different harnesses?

when I try to create a flat harness, with a multitude of wires stuck together, it places the wires in relation to the z axis. therefore, I cannot move my threads so that I can see them all in profile.How to make the flat position like image 2, I can move my segments in this direction

Hi, I am doing an integral in mathcad prime. The function inside of the integral is a summation of series of if statement functions and a step function (for loop).  I plotted the integral twice (see attached figures), one with a TOL of 0.01  and one with a TOL of 0.1. However, the peak values along the graph are not the same at the same depth and I don't know why they are different since I am integrating the same function. However, the function stops at the same point (where the Moment is 0 kip*ft) at the very bottom.  I am wondering why the peak values are different by changing the tolerance. Thank you.     

Hi all, I'm in quite a pickle here. I have a multibody part, but the performance is getting horrible (file size is nearly 1gb), so I need to split it up into a new part file for each individual body, and remove unused bodies I have done this part, but now I am left with a single part, but it of course still has all of the features from before the 'Remove Body' feature. I am looking for an expert's take on what the best course of action is. Do I manually go through and delete each feature that doesn't contribute to the end-body needed? I have thousands of features, and about 10 individual bodies that I care about. As such, individually selecting the unused features that I want to delete will be very time consuming. I am wondering if anyone has a better way to do this, or has been in a similar situation. I would appreciate any advice! Thank you,Jeff Houston

Hi everyone,I'm trying to customize our drawings. We need to display the Wtpart version in the drawing format or template.Are there any methods to do this?How can I use this information in the drawing?Thanks!

Hi,Could somebody to say, why I could not write labels unit of temperature coefficient of copper 

I need to create a list of solutions to a function based on tabulated inputs see the below not sure how to do this in Mathcad

Hello PTC Community,I'm currently working on a project related to heat exchangers, specifically focusing on an economizer. I've attached some temperature characteristic curves showing the temperature profiles for both co-current and counter-current flow arrangements. However, I'm having difficulty adjusting the axes for both the x-axis (distance) and y-axis (temperature) to improve clarity and presentation.What I Need:Guidance on how to adjust the x-axis and y-axis scales appropriately to represent the temperature profiles effectively.Any tips on ensuring that the axes align properly with the temperature values and flow direction for better visualization.Your insights and advice would be greatly appreciated!i have added a mathcad prime file and a screenshot from my book, Thank you in advance for your help!Best regards,Michael

Is there a way to embed a font in an *mi file created by Annotation? I'm afraid that my customer can't display a drawing correctly if he has not that font in his Windows computer. Related question: is it possible to do the same (embed fonts) when exporting to DWG or PDF file format? I'm using Modeling 20.5 on Windows 10

In Creo 10 Is it possible to move the location of the Section to the Top of the ModelTree or even attached this to the Insert Here line.  Is there a setting controlling this location.