CAD

In Creo, flexible components such as springs, mounted in an assembly, do not graphically show their flexibility when dragging. How to solve this behavior? What can I do? And without using the mechanism! In short, I would like to see the spring that stretches and compresses when I drag the purple component without having to regenerate at the end of the drag. thanks in advance to anyone who can help mestarting position after dragging the purple component after regenerated  

So, I got this model, that has an "Inherited Model Reference", so it should have an external inheritance feature inside that cannot be retrieved by Creo (Version 8, and 10). After you try to load this model, your session is corrupted in the following way:The File > Manage Session > Object List is empty [1].The Folder Browser > In Session shows the reference model [2].The Folder Browser > Workspace does only contain the model I want to open [3].Opening the reference model from In Session does not work (cannot be retrieved—expected, Object List).Opening the reference model by itself works fine. Having the reference model in session does not change the issue.Erase Not Displayed looks like [4], and results in an "All the objects which were not displayed have been erased." message, but the session remains unchanged (Object List, In Session, Erase Not Displayed).When we try to visualize this model in WVS I get the error "Failed to erase 1 files in session (-1 1)" and the pub

Hello all, first time post, long time lurker.    I've recently dabbled into CREO simulate. I'm having trouble working with fasteners and understanding why such low fastener preloads produce insanely high stress values. I'm using CREO 7.0 When I apply only 10N of preload to my fastener (1/2"), I get thousands of MPa on the metal plates. I have no external loads applied. 25000MPa. WHY? Here's a look at my fastener.And here's my material.Please help me understand what is going on. Thank you.

I have the step by step hand calculations for this type of problem but I really would like to learn the ptc Mathcad analysis for it and somehow the ODE Mass Spring problem doesn't help me make the connection. Could someone please help get me started with this?

Using Solid Model Tools in Creo NCLee Goodwin Principal Solutions Consultant PTC/Colorado 

excelente servicio

For the Creo drawing BOM.The BOM level should be automatically adjusted according to a size A3, A4 etc. , If needed move to the next page.Is it possible?

Tried placing Decals on models...they must be invisible?  Went thru the prompts, searched in the HELP section, did the Mapping Shape and wore my tin-foil hat for a bit...???!!!   It's on a flat surface and the model is brought in as a STEP file?   Screenshots show the application of the decal...invisible.  

Hi,We are working on chassis design for off-road vehicles and we have very large assembly files. (Approx 10.000 parts) I am working on projects by excluding or including components but sometimes it takes time to process easy tasks. Our computers are workstations and they are very good but in very large assemblies it does not help. I know some ways to do but it didn't help much.Is there possible ways to increase performance? Thanks in advance -Enes

Hello Folks, I am using Creo 7.0 and partial or detail view generates as full view in pdf file when working online (windchill connected). But when I generate pdf file offline (with standalone creo / offline) same view remains as is as they are in creo drawing.I wonder if anybody faced this issue. Any help is appreciated!! Regards,Mani

Hi all, when processing a save as of a creo parametric assembly in whindchill, I would like to include the illustration work.Unfortunately creo illustrate file is not embedded. what is your workarround whith for this use case? Mine is to save in local the c3di, break the link to the source, reconnect windchill and reconnect to the new published PVZ...

Hi everyone, I am having an issue with fixing parts in Creo Parametric 6.0. We are a team which works on chassis manufacturing and we have a lot of parts in our assembly files. Sometimes we have some reference issues and we have to delete all constraints and fix all parts in assembly. I created a mapkey for this but it just does one part with one keytap. So we need to fix all the parts but faster. We are using Windchill PLM by the way. (If you need this information.) Thanks in advance for the help!

On the Creo 2D drawing, For the Sheetmetal fabrication BOM table, is it possible to show weight of each component and total final weight?

Hi,I cannot for some reason get a license file. Whereever i search i have reached the maximum number of requests, although i have never activated it. Please help.- Dennis A

Hello Everyone,   We are working on an assembly having lots of sublevels. While creating some relations , when try to "Insert" -> "From List" , it shows the error message "Requested filtered table exceeds the number of allowed rows.Re-edit the filter or cancel."   Please help me to solve this issue.   Regards  

I am using Mathcad Prime Release 10.0 and Datecode10.0.0.0We had a group recently convert their files from MathCAD 15 to Prime and they are experiencing latency and performance issues. It now takes several minutes to perform the calculations.Also, this was reported by one power user - one alarming thing is that sometimes it takes multiple minutes to finish calculating the worksheet, but what I thought was a status indicator turns back to green before it is even done calculating (So I've either misinterpreted what that icon is, or its not working correctly)

While creating a 2D drawing, how to achieve to have a default automated center line for oblong rectangle or hexagon

Creo Elements Direct Express won't open. Get the One Time Activation dialogue box then the proxy server dialogue box, then the request license dialogue box. Get the 72 hour activation code and enter it and it says it is invalid.  Anyone else having this issue??   Thanks,       

So a drawing that has been in our system for sometime has suddenly lost all the views on each sheet of the drawings. the views still appear on the drawing tree but on the page no view can be seen including dimensions and balloons. 

Is it possible to create a custom hole file (.hol) for holes that are only drilled, not tapped?  I'm trying to recreate a standard drill chart with our standard countersink sizes and hole callouts. For the life of me I cannot figure out if Creo will allow me to do this.  I have a number of custom threaded hole files but this one is an enigma. What I have so far is attached.  When I go to select a size from it, I just get a -1.000 for the diameter.  Remove the .txt if using the file.  Thanks..

How to add user desired symbols like Half moon Topic posted from under the tips section - https://community.ptc.com/t5/Creo-Parametric-Tips/How-to-Add-New-Symbols-to-the-Text-Symbol-Palette-in-Creo/ta-p/821114.    

Long ago when I created UDFs for various holes, I could put the corresponding tolerance with the hole.  When I showed my dimensions in the drawing, tolerances came over.   I'm creating some new .hol files now but can't seem to figure out where to include any hole tolerance.   Ex:  If I pick a .250 dia hole from the dropdown, what I'd like to see in the model is .250 +.005 / -.001. Obviously I can add a tolerance later, but having it stored would help standardize things for our users Creo 8.0.0.0 Thanks..

Hello dear Community,I am a student having worked with Autodesk Inventor for a while but i am switching for a future employment.When trying to make a threaded hole i select ISO as the thread type and M20x2.5 as the size but then it spits out sizes like 0.6890 for the inner hole diameter wich is propably in inches, but since everything is set to mm it tries to make a hole for the thread thats just 0.689mm in size.Screenshot is attached aswell i couldnt find any solution via google / this forum but maybe i was just blind, if you could give me an answer or point me to an already existing Answer i would greatly appreciate it.Software: Creo Parametric Education Edition (Version 10 i belive)

I recently made some CDF-Live Simulations and thought that the particle animation is really slow.It turns out, when dragging or rotating the part the animation is fluid.GPU = 3080 ti also happens with 2070 Super, and 1660 TI MobileDrivers - Newest and i also tried the latest WHQL driversWin 10 and 11 I checked the Monitor and found that Creo (once the object stands still) lowers the refresh rate to about 3-5 FPS, (usually wanted) , but it also happened when a particle animation is running. When dragging the model the refresh rate jumps to the usual 250+ and the animation is smooth. I attached a short Video demonstrating the effect (sorry for the music and outro, i tried some presets)I searched quite some time for a config Option, but i didn't find much related to refresh rate or CFD-Live.The few Commands i found didn't solve the issueMFG Raimund

HI,Could someone explain to me how to calculate the summation operator? I have attached a picture where you can see my formula. If I understand correctly, my condition formula should work like this: 0.1 + 0.2 + 0.3 + 0.4 + 0.5 = 1.5. However, Mathcad only gives 0.1. What am I doing wrong?