CAD

Hi,Change variable a from below and look at the V2(t)...Why odesolve block is behaving like this? Is it normal?Prime 10 file attached.The expected behaviour is like a =7.              

Hi,How could be made this kind of pulse signal in Mathcad?  

Hello, I am trying to export a model so that it will be shown correct in a web 3D viewer tool. This marketing tool is called "Spline.Design" and opens the possibility to show a 3D Model on a website like other tools can do too - nothing special.  The formats GLTF, STL, FBX, OBJ are possible to import / use with the tool. Unfortunately the colors which I can see in creo will not be shown in this web tool. I want to understand if this is a problem of the tool or my process by exporting the model to one of those formats. To exclude one half of the possibilities I would like to show you my export process so you could inspect the process / steps. I am exporting assemblies (.asm): - File - Save as - Save copy- The "save copy" window opens.- I define a new file name and choose the right type, in this case wavefront (.obj)- the wavefront export settings I dont change:- the wavefront export window opens. I choose the coordinate system of the assembly to define the expor

Newbie here.  How can I create a hole pattern on a conical solid?

In this gear design work, I want to find a suitable x1 and x2 to make the sliding rate of each gear equal or close to equalnow I was stuck here, do you mind telling me which place is wrong and how to solve this question?Really appreciate your reading and help!    

Does anyone know if there is a way to get a report to show only when a "Total" is greater than 1. I have a report setup for our user that gets generated when they do checkin to windchill. This report pops up showing all the Harnesses in the Design. The intent being to check that each harness has only a quantity of 1, If any harness is a quantity of 2 or more that is an issue since the harnesses are labeled with that harness name. Users many times do not look at the report since there can be multiple pages of harnesses in complex designs. An alternate thought might be is there a way to limit specific datasets to being applied only once? Since in order to get 2 harnesses, the design has the same dataset applied twice (to 2 different cables). Attaching my report for reference.

Then I have assemblies with mechanism constrains, Creo wants to check out the components then I drag it.Are there any config options to set, or any things to do. So the components didn't get an update in the workspace?

Hi everyone. I'm using Mathcad Prime 10.0. Was using 8.0 before the update. I tend to use vectorization this way before and never had a problem. Since I switched to 10.0 this way doesn't work anymore. It should be a vector or matrix but none of the operation for matrix or vector work anymore.  Let me know if there is any error on my side, Thanks for your help! 

Hellowhen open one file of other cad system (like Cathia, SolidWork, ecc) Creo Parametric create a new file with extension (.creo) in the same folder of the original file.I'd like to controll the option to create or not create, and the position of cration.

IMPORTANT UPDATE:   I have been struggling through a file I created originally in Prime 9 that has 3 chart components. The first is a simple chart component with absolutely no modifications made to it, containing 24 curves. The second chart has 6 curves with customized legend, line styles, title, etc. The 3rd chart has 10 curves and all elements of the chart are customized heavily (chart title, legend, trace names, line type/color/thickness, axes names and tick mark font sizing on all elements, etc.). This 3rd chart continues to become corrupt after saving it - of course this is the one that needs to be published!   NOTE - Prime 10 seems to be "behaving" so far - hopefully this has been addressed in this latest version. Stay on the lookout for this issue with your chart components using Prime 9!

Hi, I'm a young mechanical engineering student and at my school we use Creo. I would like to know if in the "manufacturing" module it is possible to add "holding tabs" between the blank and the part to be machined (as it is possible to do in Fusion360). I use a very basic 3-axis CNC machine.   Thanks in advance for any help! PS : i'm a beginer, so don't hesitate to correct me if i use wrong words !

how do I set the units of a drawing to display mm regardless of the units set in a part model.i.e. Part model is in inch units but I want the drawing to display in mm.    

I have a cross section using a hatching we have been using for rubber since Creo 7. We have upgraded to 10 (version 10.0.4.0) and I have created a directory to store user defined cross hatching. When I call up the drawing and pick the hatching in the detail view and try to save under "User defined" the program locks up, waits about 10 seconds, and then winks out. No write-back, no nothing, just a fast crash. Any ideas as to what it is doing? It is repeatable.  

Can you tell me if the Creo Parametric trial license include all the Creo design essentials modules?

Hi,Why I cannot do like f2(x,y,z) as we can see the derivative result is depending on all 3 variables x, y, and z? Should be like that for f2? Prime 10

i Mathcad experts,I have some questions about Mathcad function. I don’t have any useful idea to solve my issues.I have one equation, and I can draw the curve of this equation.And then I try to solve the peak value of curve (fig.1) by using the method in EX2.Below are my questions.1.Any method I can solve this equation to get the fn_Y2, please see EX1?2.How do I use solve function to get the fn_Y2, if I have different inputs Q2 at the same time (please see EX3).  I can do this when I only have one input, please see EX2.3.If the issue 2 can be solved, and then I would try to input the fn_Y2 to get the peak value . Also I would like to draw the relationship of Q and peak value, please see the fig.2 (this fig is from TI’s datasheet), could you please give me some suggestions.

I'm troubleshooting some unexpected behaviour with frameworks. My company works in metric, but the steel profiles we use are imperial. Building a weldment with plates and beams, I usually make the plates in our metric template and the beams through whatever frameworks uses to generate the parts. There are no problems until I make the drawing and detail the parts. The plates show metric dimensions just fine, but the beams show imperial values with no unit indication. In the picture attached, the R18.4 and R20.44 should actually be R467.36 and R519.176. Am I missing some settings that would correct this?

Creo Parametric 10.0.4.0Problem: With implemented auto assignment of material for new parts, Using the create workpiece option the material assigned does not have a density assigned. With company wide standard config option "mass_property_calculate automatic" a notification about Outdated Mass Properties is displayed and adds time to resolve.No option to define template when creating a new Workpiece in NC.No option to assign a Default density on newly created parts for workpiece.You can create Solid parts, assign density and reuse those part for workpiece using “Assemble Workpiece”.  This is NOT a good solution takes longer to perform. Default material PTC_SYSTEM_MTRL_PROPS is not accessible to change.  Article CS160794, incorrectly defined a way to use a template during creation. This only applies to Mold. This is very sad that this option has been available in Mold but not in NC for a very long time.

Hi In my drawing i have place 3 types of view with different different scales and I deleted the default scale note but now i need to create a new scale note for each views again. Suggest me with a best way to create that note again easily.  Ramaniedharan R  

HiA pros vs cons question... do people find the built in rendering functionality better than 3rd party apps like Keyshot? I'm restarting animating a model in Parametric, and watching lots of videos, but then I see some people still discussing questions on how to export mechanics to apps like Keyshot. Is the animation rendering in Creo Parametric more difficult / longer to complete / not as sophisticated / etc in comparison? Should I not bother trying to learn Creo Parametric animation rendering and instead export to Blender or Keyshot and do there? I know Blender is free, and I don't have a Keyshot licence. I have just updated my software to Parametric v11 (educational licence). Thanks

Hi,can anyone tell me which standard 2553 complies with the Creo welding symbol library?Could it be ISO 2553:1992?Thank youI'm using Creo 9.0.8.0

Hi everyone,   I have a problem with interpolating data in Mathcad. Please see the attached file. In Excel, I have defined materials and temperatures. I want to replicate this in Mathcad so that when I select the material and temperature, the corresponding stress value is automatically displayed. Additionally, for temperatures ranging from 100 to 250, if I select a temperature like 120, the stress value should be determined through interpolation based on the material and temperature.   I have also attached my Mathcad file. I approached this in two ways: The first method works for standard temperatures like 100 and 150 but shows an error if I select a temperature like 120 that is not explicitly defined. The second method involves interpolation but only for one material. If I have multiple materials, I have to repeat the process for each one.   If anyone has encountered and solved this issue before, please let me know.   note - these materials and temperatures ar

Hi All I'm a newbie in CREO simulate. Please guide me how to run a dynamic shock analysis on model with an input shock of 280g for 3 ms. Thanks in advanceDilip

Hi,I am new with mathcad, Could somebody help solve problem. Why temperature value is marked red color?

So I have had this issue randomly for some time now.  It has persisted from Creo 2 M060 to the M200 release I am currently running, even persisting across multiple computers.   In rare instances (could be a part drawing, could be assembly drawing)  then the model is altered the drawing does not update the views.   No amount of regeneration updates the views.  So far the only consistent way I found to get the views to update was to rename the views (and then rename them back).  That sort of works but it means that every single drawing view (incl. detail and section) has to be renamed and renamed back to verify that the changes in the part/assembly show up on the drawing.  It really is strange, and no one here has been able to figure it out.  any ideas?thanksGreg