CAD

I am using Creo Parametric Release 5.0 and Datecode5.0.6.0  Software version: Creo 5.0.6.0, File-Preparation-Model Properties-Tools-Shrink, click Change, the menu manager cannot pop up, and it does not jump directly. How to deal with it? The rest of the changes are clickable.Here are the errors that I faced Unable to pop up menu manager---------------------------------------------------------Translated the text from Simplified Chinese to nglish using Google translate.Subject - 无法弹出菜单管理器Body - 软件版本：Creo 5.0.6.0，文件-准备-模型属性-工具-收缩，点击更改，无法弹出菜单管理器，直接不跳转，请问如何处理？其余的更改都可以点击。无法弹出菜单管理器。- By Community Moderation Team---------------------------------------------------------

Hey, I wanted to ask if anyone knows which settings increases the distance between automatic dimensions. I am trying to pick the ones I need but they are just stacked on each other. I was trying to search through drawing settings and test every config named "offset" or having some value but couldnt find anything working. Cleaning up dimensions working okay, but I need to be able pick them out first.  

Hello, I have installed Creo 8 and choose to also install the c++ and java toolkit. When the installation is done, when I go to:   C:\Program Files\PTC\Creo 8.0.1.0\Common Files\otk\otk_java, I dont have the library files, I have only the  otk_java_examples ,which have all the example files. But for  the c++ toolkit folder, C:\Program Files\PTC\Creo 8.0.1.0\Common Files\otk\otk_cpp, I have all the library file and code examples..Did I miss a step for the Java toolkit installation ?? Thank you

Hi there,I want to write one equation for serveral matrics , however I can do that if I define a variable by equation not a funcation I want to write one equation for all of them like the one in the yellow box 

After downloading Creo 10 student per the directions given in the instruction PDF, I have continued to get the two errors in the image below. The 1st error says "Creo Agent did not initialize correctly. Please contact Technical Support if this issue persists." which is followed by "Creo Parametric Student Edition (for educational use only) is shutting down because it could not run the Quality Agent, which is required in this edition. If you call Technical Support about this problem, report error 0x06000012." I have tried deleting/redownloading Creo-10, as well as Creo-8. I tried looking through the Community forums, but no luck yet. I didn't have any initialization issues when I first downloaded Creo 8 a year ago, and I don't recall "disabling all firewall, anti-virus, and anti-spyware software" when I did that download. For this reason, this error feels either new in general, or might have something to do with me already having Creo 8 previously (even though Creo 8 is comple

Hello support,We are from Software.com.br, a software reseller, and we have a client who has a Mathcad Education - Student - Perpetual license, we believe it is version 15, and he lost his license on another old machine.The customer needs to activate their license on a new machine.Could you help us reset this activation key?Could you also tell us which versions you still support regarding MathCad?Best regards,Pablo Carral.

hello, I would like some help with: I inserted the text file, but I don't have a graphic.thank you very much in advance   Translated by the Community Moderation using Google Translate ----------------------------------------------------------------------------------------------- bonjour, je souhaite obtenir de l'aide concernant : J'ai inséré le fichier texte, mais je n'ai pas de graphique. Merci beaucoup d'avance

I want to insert steam and water properties from steam table. How do I integrate steam tables in Mathcad Prime 7

Newbie to Mathcad here and I'm struggling to find a tutorial for how to insert this table into Mathcad:- 'a' and 'b' are the length and width of a steel plate which will be defined values, but how do I replicate this table to then linear interpolate and give me outputs for both k1 and k2? Am I asking too much of the software? Thanks in advance 

Hello,I have a simulation including a stationary body and a moving body. There is a contact between them. I often see the warning: "Excessive displacement at contact region". A software suggests smaller time step but I can not reduce it. The full moving process is described with 100 step and the software does not allow to define more...1. What does it mean exactly the excessive displacement at the contact? Is the time step too large compared to distance between two mesh nodes? If I increase this distance (element size) - instead of time step reduction - is it correct?2. How can I define more steps under "User define output step"?Thanks a lot your help;Roland

Dear community,I am carrying out the coding of the optimization task in Matlab, from the attached sheet, to the Mathcad language. But I am stuck at this point.You can support me in this task.Any help is appreciated in advance.CarlosRomero

Hello, I have installed Creo 8 and choose to also install the c++ and java toolkit. When the installation is done, when I go to:   C:\Program Files\PTC\Creo 8.0.1.0\Common Files\otk\otk_java, I dont have the library files, I have only the  otk_java_examples ,which have all the example files. But for  the c++ toolkit folder, C:\Program Files\PTC\Creo 8.0.1.0\Common Files\otk\otk_cpp, I have all the library file and code examples..Did I miss a step for the Java toolkit installation ?? Thank you

How do I remove the errors Tool parameter TOOL_ROUGH_SPINDLE_RPM (used in relation): value undefined. and Tool parameter TOOL_ROUGH_AXIAL_DEPTH (used in relation): value undefined. I already do the following...1. In the Tool Manager I add spindle speed and feed and radial and radial depth.2. In the parameters I remove any relations with these variables.           

Currently I have a contact model that consists of two separate bodies. One body is fully fixed and assigned a linear elastic material with steel properties. The second body rests on top of the first and has a fully defined elasto-plastic material. This was defined using developed test data. My problem comes when I am trying to enable "Plasticity" in the static analysis. The option is completely greyed out and unavailable. The material is both assigned to the model and to the correct body. Has this issue been reported previously or is there something I am missing?  I have tried a variety of solutions such as assigning all bodies the same elasto-plastic material, suppressing features that could cause issues (grounded springs/Links). Neither solution yielded any results. Even when using the elasto-plastic material definition I receive the same error seen below. Note: EP is shorthand for elasto-plastic for my naming convention and the material it is referencing does have an EP ma

I am using Mathcad Prime Release 9.0 and Datecode9.0.0.0I have been using Prime 9 for several months. Yesterday, when starting, Mathcad crashed the whole computer. After reboot, when starting mathcad, I see the small message saying mathcad is starting. Then nothing. Mathcad stops and no mathcad is seen on program manager (windows 10). I uninstalled Mathcad, then reinstalled but I still have the same issue.Here are the errors that I facedNo message

Is there a way to update the description text in the Sequence feature? Such as font size, color, etc.

I am using Creo Parametric Release 6.0 and Datecode6.0.3.0Creo language in Italian languageThe italian language has been installed, I've tried with ENV=PRO_LANG=Italian both in the parametric.psf and Set in the system variabile but none of that id workingThank you

Elementary schoole children can solve this puzzle. If you need you can use Mathcad Prime.

 Dear friends, How to create new csys at "Top_assy.asm" , which same location and orientation of "A" csys, but it should be reference with "Main" csys, not "A" csys. PS:  "A" csys & "Main" csys, reference handle already with me Thanks. 

Hello, I want to generate a square Image of 1000x1000 pixel from Creo Rendering. Currently the images generated are in Rectangular format (500x1000).Also is there a way to change drawing window size width through config file ?  Thanks in Advance…..

Hello, We have an application in Java to check, before saving a model in CREO, if a higher version of the model exists, preventing saving in case it exists. It works for the active model. But if the active model is an assembly, and if a component has been modified, when saving the assembly, it checks the assembly’s version, but doesn’t control the versions of the components. I would like to know how to control the components’ versions. This is what we use for the model: import com.ptc.pfc.pfcGlobal.pfcGlobal;import com.ptc.pfc.pfcModel.Model;import com.ptc.pfc.pfcSession.Session;Session curSession = pfcGlobal.GetProESession();Model model = curSession.GetCurrentModel(); Best regards,Amaia

Sombody had the same problem?When the PVZ is done, the straight cable segments not appear (curved cable segments appear),i tried to add this sentence into recipe: adapter/convCables=1; then, setting a master representation of the cable;then, giving a black color (in case of unwanted transparence);and creating a new layer adding the cable (created using "cabling" application) as show and later as isolate; in Creo all is ok...but, when the pvz is created only the straight cable sections are missing.Do you know why this could be happening? Regards (I using  CREO 😎

Would anyone have any recommendations on how to improve the code below? I use this function to solve Mathcad sheets from an Excel worksheet (using VBA code). The main hurdle here is to have the script wait until the Mathcad sheet is done calculating before moving on to other tasks. So far, this script seems to work fairly reliably, but it wouldn't surprise me if there's something better out there.    Using Mathcad Prime 9.0       Sub SolveMathCadSheet(mathCadSheet As Ptc_MathcadPrime_Automation.Worksheet) Dim n As Integer mathCadSheet.ResumeCalculation mathCadSheet.Modified = False mathCadSheet.Synchronize n = 0 Do While mathCadSheet.Modified = False Application.Wait (Now + TimeValue("0:00:01")) n = n + 1 If n > 20 Then Exit Sub Loop End Sub      

I am using Mathcad Prime Release 9.0 and Datecode9.0.0.0Mathcad won't print to PDF. This is a new issue. It was able to print a month ago. Failed 3 times in a row today.Here are the errors that I facedNo error messages. Just timed out.

A friendly hello,In the attached calculation it is easy to see from the angle sums (they must be 180°) that coarser starting values produce less precise results. Are there settings in MC14 that achieve good calculation results even with coarser starting values? Currently, the iteration can only be made successful in the sense of a fixed point equation with almost exact starting values.