CAD

Hello Everyone.From : Need help with the trimZeroElements( ) program function with ORIGIN := 1 and ORIGIN := 0 ?Thanks in advance for the time and help.Best Regards.Loi.

   In using Creo Illustrate with PTC Creo View Files Tools for publishing, The "PVZ" output file doesn't allow watermarks to be published. We have Windchill / model security labels "ATTRIBUTES/PARAMETERS" that don't publish.   I created our watermarks ini files using the old "ProductView Watermark Editor", The ini files work for Creo View and Creo Illustrate independently. The only impact is generating a Creo Illustrate generated pvz the watermarks are not visible in our files. We would like the watermarks to be published using our output of Creo Illustrate. We have our Windchill lifecycle designs, security labels that we would like to preserve on our Figures and screen sequences .

I wrote a program and it works properly. The only problem is that it starts from the second value in the matrix not from the first value. How can I solve this problem?, The problem is in layer 1

HiI want to calculate/plot the deflection and the moment along a column (or a stand-up beam) subjected to a lateral point load. The column is pinned at the top (A) and fixed at the bottom (B), and the load P is acting at a distance a from the top. If somebody can bring some knowledge to this, I'll be very thankful    

I have a complicated surface modelled part (over 1000 features) with a family table. When I open one of the instances, it immediately shows regeneration failures, but when I manually regenerate it again, it usually fixes itself. Why would these failures be occurring if there is nothing wrong with the part since it completes the regeneration manually?

Hi!I want to reduce the number of Creo 8 licenses either in the license file itself, on the Flexnet-server. or somehow elseHow do I do that immediately?(Flexnet Release Version: 11.17.1.0) I don't want to have suggestions like "Cancel them". For Windchill I can just allocate a smaller number as I understand it.For Creo: I login to PTC, go to Support - License Management, License Actions, Advanced Search, put the server host ID, click Search and see the licenses that I can retrieve.But there is no option to put in a smaller number. Thanks!

I'm creating a very simple part, a strip of metal with holes in it. I started with a flat part, added the 1st hole, then pattern. When bending, the holes move with the part, but when I want to reference other parts to these holes in an assembly that's not possible. I've tried bending first and doing the pattern with a curve pattern. In this case the parts show in position but the pattern has an error. I'm sure it's because the two faces of the bend become different. Tried adding points and same issue. I had to repeat holes and chamfers twice and will have to do the same with the parts attached to this. Is there any way to keep the references after bending or is something that Creo doesn't have?*I'm using Creo 9.0.2.0

I am using Creo Parametric Release 4.0 and DatecodeM080The colour coding of the model changes after regeneration.Here are the errors that I facedNo warnings or messages.

Hello,is it possible to zoom 3D views more than 400%?I have a large screen, and with small image dimensions (e.g. 7.5x4cm) the rest of the screen area remains unused.  And for certain orientations, zooming in further would help me.  Thanks and best regardsRamon

I am using Creo Parametric Release 4.0 and DatecodeM130 CREO opens the model and the mouse aperture keeps spinning: error dbg_err_crashO - continuing from serious error (ORDER_DEBUG) Here are the errors that I facedError dbg_err_crashO - continuing from serious error (ORDER_DEBUG)   Translated by the Community Moderation using Google Translate ----------------------------------------------------------------------------------------------- I am using Creo Parametric Release 4.0 and DatecodeM130CREO打开模型鼠标光圈一直转圈:报错dbg_err_crashO - continuing from serious error (ORDER_DEBUG)Here are the errors that I faced报错dbg_err_crashO - continuing from serious error (ORDER_DEBUG)

This is a supplement to: Article - CS129684   Is it possible to measure distances and other spatial quantities in results window in Creo Simulate.   Complex measurements and comparisons to original CAD are possible through some additional steps. In simulate results, set the deformed scale to 1.0 and then export the model to VRML format Change back to Cad side and open the VRML file. This can then be assembled to your master and compared or measurement tools used. Some additional planes, sketches, or 3d curves referencing the VRML vertices may be needed to measure a diameter. This is because the deformed model will no longer have perfect arcs, cylinders, and spheres like the original CAD and so some form of approximation is needed. 

I have tried 2 methods：1.Componenet - Restructure。  2.Select Part，Right click，move to new assmbly However, I did not find the corresponding API for this functionality in PROTOOLKIT.

All,I have done a bit of searching but have not found an answer.  Aside from a manual operation to exclude an item from a 2D repeat region, is there a filter that can be applied to a repeat BOM region that excludes a model that is set as "include" in the assembly? ThanksBrett

Hi,In a sketch, I draw a first datum centerline. Then I want to draw another centerline at a certain distance from the first centerline. My problem is that when creating the second centerline, CREO seems to select the nearest geometry edge to specify a distance. How to specify the first centerline as the reference for the second centerline ?Thank you for any help

I work with 3 different clients all using the same version of CREO would there be any way when opening CREO select client and save the cache in a specific folder? today I use this way. ENV=PTC_WF_ROOT=D:\Cache\%USERNAME%\PTC\ProENGINEER\Wildfire\.wf

Is there any ways to check which simplified representation i have applied to my BOM table

Hello,how to set and make default complementary angle when creating flat pattern view?Software version: Creo Parametric 6.0.5.1 Thanks in advanced!

For those who still use it, I encountered some strange behavior in the symbolic operations of mathcad 11.2a. In my decades of using mathcad, I find it hard to believe I hadn't seen this before. Using a unary negative sign in front of a vector evaluation seems to work as expected both numerically and symbolically. However, if the unary negative vector is added to another vector of the same size, the result is a nested array. I can't figure out what is going on. Am I just missing some expected behavior, or is this a bug? Lou

Hello, While saving the assembly I generally receive this error "Object has failed feature", which does not allow me to save the assembly unless I suppress the part. When I check in the part I see no error.   What could be the main issue and how to resolve it?      

Hi,  I only have access to Creo View Express.  I need line drawings, but when I try to print to pdf from HLR, the lines on the printed pdf are very weak.  Any suggestions on how to improve the line weight or other parameters that would work?  Thanks and best,  Eva

need to find q1 which is basically the values of qcza( known variable) qcza is the resistance in known depth [z]. q1 is equal to qcza when the depth is between 0.7D<z< 4D when D=0.4 and it has always to choose the minimum value until there is smaller value. the file is attached

I have z values and I want to specify an interval from the z values. I want to say that the values of layer 1 are the vales between 0.7d<z <4d when d = 0.4m .  

I need to find q1 which is basically the values of qcza( known variable) qcza is the resistance in known depth [z]. q1 is equal to qcza when the depth is between 0.7D<z< 4D when D=0.4 and it has always to choose the minimum value until there is smaller value

Not a question of mathcad but Mathcad can solve this. Find the Length DE. ABCD is rectangular. 5 areas are same sizes. AB=13 cm.    

Help me please with this problem! Thru ODEs solution - see please the attach Prime 9 file. See also Great-Comet-of-1811-ODEs-solution