CAD

I am having an issue accessing Creo 10.0. I had Creo 9.0 but had to update due to my files upgrading from 9 to 10 on my new laptop, so my old laptop running 9.0 could no longer open these files. I attempted downloading creo 10.0 using my schools access, however I am running into an error I do not understand, a screenshot is provided below. 

Hi Community, I'm using Creo Parametric 9.0.5., and my problem is that the auto scaling within the sketcher only works for me in parts, but I need to create some sketches in assemblies and this feature is not working there. (I have sketcher_auto_scale_dimensions yes set in the config.pro) Is there any solution for this issue? Thanks in advance!

According to article CS400725 Creo Parametric exits in many scenarios with tracebacks. Corrected in Creo Parametric 8.0.10.0, 9.0.7.0 and 10.0.3.0 So download one of these and one will never crash again. 😎

Hi AllI was trying to import an excel table, save in CSV_(MS DOS) format into my Creo 2 drawing sheet. The reason was that it's too hard to modify a designed table in the Creo drawing sheets.The error was that some columns have more rows that the other ones. Which is not true.In my file there are two columns, one with letters and the other with numbers, and there is no empty row. So I have no idea why it doesn't accept my excel file import.My idea was to always modify  the tables on the excel and re-import them to my Creo drawing

hello, I am working with Creo 4.0, and suddenly ran into a problem where snapping to sketch reference lines stopped working for some reason. it was working fine before. it will snap to vertices and points just fine just doesn't want to snap to lines.the error does not appear on other computers in my company. things I tried:1- I copied the config.pro file from a working computer2- reinstalled PTC parametric again.3- changed snapping setting from the file>options>sketcher menu (tried very high, high, mid)4- model accuracy to absolute 1.0   nothing seems to work and its driving my sanity to its limits.

Using Prime 9.0Hello,I have a large matrix of time and current data for 6 different channels. The even columns (0,2,4,6,8,10) contain the time data for the odd current data columns to the right (1,3,5,7,9,11) - Excel image shown below for visual clarity.I am trying to sum up the current data of the 6 channels into a 2 column matrix (time, current) adding the currents at the appropriate times. The time data is in microseconds with time steps of ~.006-.007 μs and the channels time data overlap with start times shifted by 7.5 μs. For example, Channel 0's time data spans from 7.5 μs to 41 μs, Channel 1's time data spans from 15 μs to 48.5 μs, and so on. I wrote the matrix data to an excel file and attached. Excel Image:MathCAD matrix:It's kind of hard to explain verbally, but basically the channels have time and current data that overlap, and I want to add the currents of the overlapping times accordingly. I have a user-defined function tha

Initially posted in this topic Hello PTC Community, I am facing a similar issue regarding the weld connections being ignored. Although, this thread looks very old, I was wondering if anyone ever got a solution for a similar problem yet by any chance? Any inputs are highly appreciated. Many thanks.

Hello All, I want information related to convert large amount of files approx 5000 to 10000 files from Solidworks to Creo Parametric.What will be the best option to do this? May be any batch migration tool or add in?Thank you.

is there a way to have a floating license and be able to remotely point to it ? would like to have creo on my personal laptop and be able to point to a generic floating license that is on our server AT WORK without having to team viewer in to my work computer FIRST and work thru my work computer. Seems to be slower going thru a third party approach.

Hello, I would like to pull the name of top level assembly name in child model or subassembly drawing. 

Hello!  Currently using 20.5.2.0. First time post from myself. I have been using CREO now for about three years, and feel like I have a pretty good handle on working with it. However, I am yet to find a way to create a render that has a .jpeg images attached to it.  I have a CAD model with a selection of labels currently shown as .jpegs on a work plane which I have attached to their respective locations on the design, however rendering doesn't recognise these images due to them being on a work plane.  Is there a way to attach these images to the CAD model rather than the work planes which will allow me to create a render with the .jpeg images showing?  Any help is greatly appreciated.  Many thanks

Creo 10.0 ....while installing software i am stuck in step 2 ....even after I entered correct sales order number it is showing invalid file format .....how to solve this problem?

Dear Simulate Users,   I have the real material model of a plastic (PA66 GF15). A table - send by manufacturer - includes the Young modulus, the max.tensile strain, the max. tensile stress and finally the measured material curve: The dashed line (see elastic line) was created by Young modulus. It can be seen that the linear range of real curve is very short. The real curve begins to bend quite early. Theoretically the yield point is in the point of bending start.   1. But how can I define a material curve which approximates this real curve well?  2. Where is the yield pont exactly if the data table doesn't include it?   Thanks a lot; Roland

Creo Parametric 7.0.11.0 and Creo Simulate 7.0.11.0 both are installed, I want to uninstall Simulate 7.0.11.0 only silently. I am using the below comment:Start-Process -FilePath "C:\Program Files\PTC\Creo 7.0.11.0\Simulate\bin\uninstall" -ArgumentList "-quite -xmlPath `"C:\Program Files\PTC\Creo 7.0.11.0\Simulate\bin\pim\xml`"" But I am always getting the below option, but i want to directly uninstall creo simulate only with out user input  

Hello, i was confused when i looked at the drawing errors and the same drawing in my colleagues window. the errors were completely different.Could someone explain this? snap attached. Thanks,sandy

My company uses Creo to design large scale glass facades and other highly customized designs for the architectural market. Some of our parts are very special and some are typical steel cross sections.   My company is about to purchase an  OCEAN AVENGER PLUS DRILL LINE.  The AvengerPlus requires a DSTV compliant file which has a .nc or .nc1 file format files.   Does anybody have experience  with converting Creo parts into a DSTV compliant file?   Any help would be great.   Thanks. Steve

Hi, i am Creo elements/Direct Modeling Express- beginner.I want to move the 2D drawing on the 1st workplane to other workplane, so that I do not have to redraw it.Please somebody teach me how!

I have wing geometry that I would like to have as one body. There are lines traveling the span of the wing subdividing it and I would like to get rid of them if that is possible so that it is not subdivided at all. They have given me some trouble when exporting the geometry for meshing, though I'm not sure why. I would appreciate any help. I have included a picture of what I am talking about. I have shrinkwrapped the file but it still has these lines. This is Creo (8) Student Edition. 

 Is there any way to simplify this? 

I announce a competition - who will create the most interesting and beautiful portrait of the roots of two equations. I will send a hard copy of my book (2⁵ Problems for STEM Education - 1st Edition - Valery Ochkov - Rout (routledge.com)) to the winner of the contest. The end date of the competition is April 1, 2022. I will personally determine the winner. Materials explaining the essence of the task, in attachment. In the picture - a sample of a work of science and art, which should be submitted to the competition.

Dear all, I have searched the PTC and this user community portal for help in creating parametric internal and external spline parts. There are many posts on these but none of them have a solution. Has anyone solved or found an easy method to generate internal and external helical splines? Thanks and regards,Jay

Even though the function is defined when doing ans := ShahST(G), MATHCAD says its undefined. Please advise. Thank you in advance.  

Hi everyone,I have a mechanism analysis set up involving three hydraulic cylinders linked to a common part. During the analysis, I get an expected failure, "The mechanism constrains could not be satisfied. The mechanism could not be assembled." I get this error because I defined the ranges of operation for the hydraulic cylinders, and one of them is going out of range.Currently, I have translation servo motors driving the motion of the cylinder rods. The motion is defined such that every combination of cylinder extension/retraction is tested (i.e. cylinder 1 is fully extended while the others are retracted, then cylinder 2 is extended alone, then 3, then cylinder 1 and 2 but not 3, etc...). These numbers are loaded from a table in the motor definition, and the only way that I know how to fix the constraint issue is to analyze the failure point and redefine the motor magnitudes at the time of fail.Is there a way to run the analysis such that the program will run without causing constrai

Every CSYS is mathematically defined in space by 6 parameters.Is it possible to retrieve these 6 parameters (XYZ-translation + XYZ rotation) in Creo?The XYZ translation is easy: it's just a measurement feature.But the rotational parameters are not that simple.Does anybody knows how to do this?Some background:I have a CSYS, somewhere in a complex assembly. It is defined by a long chain of features and dependencies, interconnected with parameters and relations.At the end of the road, I would like to know the exact position of this CSYS, with reference to the base CSYS.With these 6 parameters, I should be able to create a new CSYS, referenced to the base CSYS, and equal to the original CSYS.Any help would be greatly appreciated.Jeroen.

Hi I have 2 equations that are written symbolically. and there are 2 variables : "D" & "z"  I cannot solve the equations even in solveblock . please help me . my file is attachedThankyou