CAD

CREO Version 7.0.4.0Win-10GPU: RTX A2000 8GBRAM: 24GB Within a newly created part-file, when I extrude a line or curve as a surface.- Upon completion the extrude is hidden- When I Un-hide the extrusion, it remains invisible on the part.What I've tried:- Reboot- Changing the following configuration settings (both in-session only, and added to config.pro)        - shade_surface_feat no        - style_surface_mesh_display on        - u3d_create_color_surfaces yes Not able to get surface models to show still. See video for creation steps. Thanks in advance for any ideas...(view in My Videos)

Check out this video on Creo View from PTC Application Engineers Presenters: Jason Petersen (Solution Consulting, Principal) and Ryan Butcher (Solution Consulting, Fellow). Creo View Learning  

I am using Creo Parametric Release 9.0 and Datecode9.0.3.0We have a J-Link Applications in which we run a simple asynchronous mode.In one of the module, we load a part model and retrieve various part properties, in particular the Mass Properties.Everything ran smoothly up to Creo Parametric 5, but version 9, we are getting an "pfcExceptions.XToolkitGeneralError" when trying to read the Mass properties from the model.We could retrieve the Mass properties from the same model using Creo 3 and Creo 5.We have verified the following troubleshoot guidelines according to the documantation:- Make sure the environment variable PRO_COMM_MSG_EXE is set to full path to pro_comm_msg, including file name, including .exe on Windows.- Make sure the environment variable PRO_DIRECTORY is set to Creo Parametric installation directory.- Make sure name service () is running.Please let us know if any other information is required from our side.Best RegardsHere are the errors that I faced:pfcExceptions.XToolk

I am using Creo Parametric Release 9.0 and Datecode9.0.3.0I'm creating a parametric model with family table (end product will be a metal cast part). All basic features (revolves, extrudes, etc) scale appropriately with the values in the family table. However, when I added draft features, these features were failing in the dependent models (not failing in the generic model). It appears that draft features are losing their associativity to the relevant faces/edges/planes/etc, even when these features are still present in the failed model with the same name and number.

I am having issues with the following ModelCheck checks in my start file. I want to be sure that the CLASSIFICATION parameter is set to only one of the values set in the classification.txt file. I have also set it to issue an error if CLASSIFICATION is missing in the parameter list or has no value set.   Check file setting: PARAMCHECK YNEW E E N E E   Start file setting: PRT_PARAMETER CLASSIFICATION STR EQ LIST_CLASSIFICATIONPRT_PARAMETER CLASSIFICATION NONE EQ PDM   Contents of classification.txt  LIST_CLASSIFICATION ECILIST_CLASSIFICATION OFFICIAL USE ONLYLIST_CLASSIFICATION UCNILIST_CLASSIFICATION UCNI ECILIST_CLASSIFICATION UNCLASSIFIEDLIST_CLASSIFICATION UNCLASSIFIED ECI

Hi, Can someone upload a worksheet sample on how to use Tags and internal Links Cheers Terry

On a brand new install of Creo, I'm having an immediate issue with the embedded browser...The contents of all tabs in the embedded browser are shifted to the right so that a portion is cutoff. Resizing the window only changes the amount of white blank space to the left of the content. I don't have Windchill setup currently to see if it is affected as well.I've done some quick Community searches and haven't seen any similar issues posted in the past. I've also tried some config.pro modifications to see if I could fix it myself to no avail. Thanks.

Starting with Creo 7 PTC changed the start parts to have absolute tolerance instead of relative tolerance because of multibody. I am aware of the topics on this board discussing absolute vs relative. I am curious as to whether anyone has done any studies about whether this has impacts on large assembly management.

I have an Excel file that has merged cells. I don't want to pull the native file into Creo. I am importing these now as a .csv but when I do that I loose the merged cells.   Does anyone have a technique or a better way of doing this? I looked at creating my own tbl file but they are not straight text.

I have assemblies with lots of representations.  I often need to go back and add something but I only need it in one of the representations but it adds it to all the representations.  I have tried activating the specific representation and performing the addition but it still adds to all.  Then I have to go and edit all the other representations removing the newly added component which can waste a significant amount of time. Thanks!  

Hello,I'm using gamer keyboard for a long time.(for 18 keys programmables for my principals mapkeys).I wanted to test this device.I can't setup it.Chinese software seems not to work.Anybody has test and configure this ?Thanks a lot !   

I am using Creo Parametric Release 9.0 and Datecode9.0.2.0What if the angle dimension does not display the suffix zero? I filled in 'ang_unit_trail_zero' and changed it to 'yes', but it didn't work. I tried searching for' draw_ang_unit_trail_zero 'but couldn't find it. I hope everyone can answer this question. Thank you.

Hi Guys, Can someone please simplify the final expression for fixed end moment for a point load at any point on the beam? Please see the attached file. Solution should look like below expressions of Fixed end moment Ma = -Pab^2/L^2Mb = +Pa^2 b/L^2

Hi,can someone please help me?I want to find minimum non-zero value, in col B and its respective values in col A & C. Thanks in advance.  

Hi, the content of the parameter will translated depending on the Creo (9.0.3.0) language. Is it possible to use the English and German translation in two different parameters e.g. BUW_Name and BUW_Name_de? Thanks for your help. Ute      

I am using Creo Parametric 8.0 8.0.0.0Analysis fails after mesh is created and 99% of the FEA is completed of a fairly complex assembly. The same assembly has been successfully analysed in Creo Simulate.

Hello! I was creating one symbol file in which I need information extracted from one of the available notes in drawing but there is no method to define notes in variable text field. Right now, I am using parameters to define values. anybody knows how to define symbol using notes.   

Once i opened Creo Parametric 5.0.6.0. it showed the error below please help

Mathcad won't allow me to expand the attached expression into a series because of a singularity. Yet the publication shows that it can be done. Any suggestions? Please see the attachment.

I want to write in my new book like this.What do you say about it?"Mathcad has become a kind of stepdaughter at PTC. Previously, this program had a mother - MathSoft, which in 2006 sold itself and its daughter for almost $ 100 ml to PTC. Now the Mathcad program is not a separate mathematical program like Maple, Mathematica or SMath, but works as a servant of Creo CAD and gradually, alas, dies. ORIGIN Программа Mathcad стала некой падчерицей на фирме PTC. Раньше у этой программы была родная мама – фирма MathSoft, которая в 2006 году продала себя и свою дочку за почти 100 мл долларов фирме PTC. Теперь программа Mathcad не является обособленной математической программой как Maple, Mathematica или SMath, а работает служанкой у САПР Creo и постепенно, увы, хиреет.  

Hello Alls,I've got a problem with Creo2.I have an assembly since a long time that manage several product versions (options).This is handled with family tables and geometry copies from skeleton parts.I've made a whole assembly with all instances.However, all parts are not updated even with "verify in family tables".Each time I save whole assy, Creo tell me that parts are not updated...I've send to manufacturing several times wrong parts that has not been updated... 😞I can't understand why parts are not update.For some parameters, it's ok.But for Following skeleton and geometry copy, sometimes not.I also have Creo 9 (aax...) but not sure this will resolve anything...Perhaps a problem in my method ?Thanks for any advice...

Is there a way to maintain hyperlinks in the pdf versions of Mathcad documents?  

I am using Creo Parametric Release 9.0 and Datecode9.0.2.0When I create an assembly parameter table on a drawing file, such as BOM, there is no & displayed before the parameters, and the table does not respond after importing the assembly. Assembly parameters only take effect when I create an assembly parameter table on the format file and create a drawing file using that format template. I would like to know how to directly create assembly parameters on the drawing file. Thank you.

Hello,           We see that in the case of the function Test1 Arg(Test1) cuts -180deg line, as a result, we can have values ​​for:   But in the case of the function Test2 Arg(Test2) does not cut -180deg line, and this means that: or or   But I get the red color:   The idea is that I don't want to see this red color (although I know from where this no answer/red color comes -> because the graph does not cut -180deg line), but instead, I want to receive as answer one of the 3 options listed above. Is this possible?   Mathcad Prime 8 file attached.   Thank you.  

Why we have 3 functions lspline, pspline and cspline? Can we have only one spline?