CAD

Hi All, Not sure if this is possible in CREO but I was looking to pattern a feature between 2 planes, so if you change the instance it will adjust the spacing automatically. Not a complicated thing to calculate manually but was curious whether the software can do this automatically within the pattern feature.  TIA.

I have obtained CAD Creo4 data. So, I tried to open the data with our CAD Creo2 (M200), but it couldn't be opened.In this case, what should I do to open it with CAD Creo2?

I have a legal 32 bit CD for Mathcad Prime 2 that I used for many years on my old laptop which had Windows 8 OS. Microsoft does not support Windows 8 anymore. So, I bought a new laptop which has Windows 11 OS, 64-bit machine. I also have legal 64 bit CD with Product Code for the Mathcad Prime 2. I installed it on my new laptop but having hard time getting the License Key. Therefore, I will appreciate if someone from the PTC or the PTC community could help get the License Key!      

I have a symbol that is used as part of the drawing template and is tied to the origin 0,0 for a template.  When designing or copying another symbol a user can set any text or lines with respect to an origin or 0,0.  If one were to insert the symbol at absolute 0,0  the symbol will be inserted exactly in the correct location.  However, if a user were then to "redefine" the symbol it then opens the editing tool but the symbol is now centered and there is a new origin that is different.  What gives?If I were to save this symbol again it would no longer place in the original origin.  It will place according to the new origin.  This makes editing a symbol almost impossible if you plan to set it at the absolute 0,0.Does anyone understand and know how to help resolve this issue? 

\   How should I start this drawing  

Hello I just have been starting to use creo 7 and got this message and creo crashes. once i got this error now every time i try and open creo this message comes up and creo crashes.any help would be greatly appreciated as i am shut down and not sure how to fix this. thanks, in advance.steve f   

Hello,I am using Creo 8. By default the tail on welding symbol is displayed at symbol creation and reappear when symbol is redifined even if there is nor weld process selected  or sequence ID displayed.How to change this default setting? Thanks    

Hello, trying to install version Mathcad 8.0 but if double klick the setup.exe file it shows that something is loading, but at the end nothing happens. Then tried to install from the .msi file, it downloads some tools but at the end it doesn't work either. Funny things is that the Mathcad 7.0 Version Installation works.So whats the problem? idk

REQUEST TO GET LICENSE KEY FOR MATCHCAD PRIME 2.0

I had problems with the setup crashing because kernelbase.dll as I found out in the Manage My computer My path/username contains the Swedish letter 'ö' :  ...but when I moved the extracted install-zip for MathcadPrime 9 directly to c:\ and tried to install it worked fine!Setup now runs smoothly. So be aware of any local charachters in the installation-path!  

I created 16 decals, all using the same method. One of the decals will not appear on the model. I get a blank placeholder as though it is there, but no image on it. All the others worked fine. 

I want to know how to open this editor it is about Automatic Representations ( ver. CREO 9.0 )  

Hi Team,Greetings, I am working on the code for drawing to add flat pattern view, please help me on this. Api/ code anything would be appreciated.. Thanks in advanceAbdul 

Hello,   I'm trying to place a symbol at specific location on drawing. I created a symbol which has (or should have, i currently don't know if it works) a variable text (text would change based on dimension index; so from 1 to x)   I managed to get the symbol definition and place the symbol at a location which i choose with mouse. So next i tried setting the location with the x,y location that i get from a dimension on drawing and that's where i got to a problem where i can't create a point somehow. Code:   dim lok_x as double dim lok_y as double dim point as new cpfcpoint2d     dim allattachments as ipfcdetailleaders  dim allattachments_cr as new ccpfcdetailleaders set allattachments = allattachments_cr.create() allattachments.itemattachment = position sym_in.instattachment = allattachments   Bold section works with position variable that i set with point variable which is set with mouse click on drawing. How would i set that point wit

hello. I am trying to make a combo box with multi choices of various equations depending on defined variables, the attached file will explain it very well.how can I make it work?thanks, 

Hello  I am faily new to creo  i am using creo 7   I have an assembly and have defined a custom coordinate system origin in the assembly file   i am trying to get the center of gravity of a part in the assembly with respect to my "assembly" custom CS   What i am seeing is: 1) i can only open the part and get the CS of the part with respect to a CS "inside" the part file. or 2) i can get the CG of the whole assembly with respect to a custom CS.   both options are not what i need i need the CG of a part in an assembly with respect to a custom "assembly" CS any help would be greatly appreciated.  thanks       

I am using Creo Parametric Release 9.0 and Datecode9.0.1.0HelloI have created a block which has multiple simple hole.but when I tried to get the depth of simple hole in hole table , I am not getting any parameters to add to hole table format.( But If i create a any standard other hole ,I can see multiple parameters BUT NOT FOR SIMPLE HOLE)How can I add a depth of multiple simple hole in hole table with help of parameter'sArticle - CS44121<< THIS ARTICLE ANSWERS MY UESTION BUT NOT ABLE TO REPLICATED THE PROCESS

I am working to try and improve my companies Creo start parts and configuration.  One thing that annoys me terribly is the terrible Layer Scheme.  Engineers don't even bother using layers and the result is that I have to work with a spaghetti mess of datum planes, axes, and csys.  The layers are set by configuration option instead of by rules and I believe if they were set up by rules and easy to understand and use they would be much more manageable. Does anyone have any Creo Parts with Layer Rules they would like to share for ideas?  I remember working for a company that had an excellent rules scheme for layers.  I know there is no absolute best way for setting layer rules, but I would like to see some examples from the community to help make rules that are sensible and easy to understand.

In the attached Prime 8 file I'm trying to solve a problem I have invented in my head.  I have 2 metal plates, one is fixed and the other is moving toward the other very rapidly (e.g. 1000 mph).  The voltage between them varies sinusoidally at 60 Hz.  The air between the plates is assumed to breakdown at 3 kV/mm.   I want to vary the phase angle of the applied voltage and find the phase angle that results in the maximum voltage stress across the air in the gap.  But, I'm not sure how to find that maximum in MCAD.    

Using Mathcad 3.1 under Windows 10.  Mathcad refuses to plot a two-variable function even though it will plot the same one-variable function with the other variable fixed.  "Cannot plot this function. It must evaluate to real values."  What is going on?  (File attached) 

Can someone please explain how the right side (RHS) of the equation below represents active power (P)?                       Explain P: = PFUL*MVA + (MVA - PFUL*MVA) *i/N   given N = 2000, and I run from zero to N.        

Hi all, I am using the Adobe Plug in for PDF markups in Creo View and am curious if there are ways to set the scale on PDF measurements? Currently I'm able to measure the document with the Adobe Tools, but am unable to change the scale from the embedded scale. This is fine if the scale is embedded properly but that is not always the case for the documents I work with. Has anyone had any experience with measuring PDF in Creo View? Currently using Creo View 9.0 and Adobe Pro. Thanks 

I am using Creo Parametric Release 4.0 and DatecodeM150I am using the Animation Application to create animations and videos ofan assembly in motion using snapshots. I can generate animations usingsnapshots until I create gear connections in the mechanism application(there are gear to gear connections and worm gear connections). I candrag the components around with some lag, but when I try to generate ananimation those components affected by the gear connections do not move.Here are the errors that I facedN/A

Is PTC planning to offer in future versions of Prime backward compatibility with files created with Matcad 15?     

Hello I am faily new to creo i am using creo 7 I have an assembly and have defined a custom coordinate system origin in the assembly file i am trying to get the center of gravity of a part in the assembly with respect to my "assembly" custom CS What i am seeing is:1) i can only open the part and get the CS of the part with respect to a CS "inside" the part file.or2) i can get the CG of the whole assembly with respect to a custom CS. both options are not what i needi need the CG of a part in an assembly with respect to a custom "assembly" CSany help would be greatly appreciated. thanks