CAD

I have 16-bit TIFF images I need to analyze.  But, it seems that Mathcad Prime 8 (and 7 before) only reads them as 8-bit.  Mathcad 15 read them correctly to their full bit depth, but Prime does not.  Does anyone know how to read 16-bit images to their full depth?  (I also have 12-bit JPGs with the same problem, Prime reading them only as 8-bit.) Thank you, KK

I am using Creo Parametric Release 4.0 and DatecodeM110Creo appearance palette for several segment colors are have to configurate, we tried to set the .dmt file but the location was not fetchable, If any solution for creating the .dmt file and set in library it will be useful for different product as separated segment such like (Product 1 it contains several colors, Product 2 - it contains serval required colors for the specific product etc...)

I wasn't sure where to post this but maybe this is a good enough place. Recently when I start up Creo (Croe 4.0, M120), I get an annoying popup from the browser that is built in, as shown here. Is there anything I can do about this? Do I notify someone that their script is failing? I don't know if it's just me. I don't see this when I browse over to the community site with my normal browser (Firefox). Maybe I could stop Creo from bringing up this browser? I never understood the reason for it being there anyway.

Hi,I'm using Mathcad for 3 years now in my school. I have installed it on my PC too, but since yesterday Mathcad doesn't start anymore. I only see the Mathcadlogo and then it disappears. I also have a licensekey activated. Maybe you can help me solve this, because i need this programm for exams and some other things.Best,David

I am using Creo Parametric Release 7.0 and Datecode7.0.6.0Design Exploration creates .tmu files when you save. Is there a way to convert that file into a .prt file. This would save time once a design is refined.

I am using Creo Parametric - Release 7.0 (connected) Release 7.0 and Datecode7.0.2.0im new at this so maby this is not the correct place to ask, but is sure looks the bestwhen making a restricted parameter with a text document i use µ in one of the options, but in creo when selecting the option it shows "µ" instead of "µ".i tried some other sybols and it does the same thing with the Âannyone know whats going on?

I am using Creo Parametric Release 3.0 and DatecodeM190ModuleWorks Simulation doesn´t start, Creo Parametric crashsHere are the errors that I facedFatal Error

Helping an old man with fading memory would be much appreciated.In the attached Mathcad 15 file, I have somehow enlarged the label fonts.  I cannot recall how I did this.  Can anyone find the setting I used to change the 2D graph fonts? Thanks for any help.Reg

How do I continue an equation on the next two or three lines if necessary?

 so it says my units are incompatable but they are unitless 

Hey all, first post here. I am trying to use the swept blend feature to remove material as shown below. I am using a start sketch and an end sketch to drive the geometry of the swept blend and I am using a curve that I created by points (many!) on the outside surface of the original geometry. The issue that I am having is the swept blend is not working very well and leaving a lot of excess material. Also, it is not following my curve very well. I tried using two trajectories but I do not think that is allowed. I have been struggling with this for may days now so any help is appreciated. The end goal is to remove material from the center section and have it tapered on the edges at like a 45* angle, which you can see from sketch.

I can't figure out why the first equation in the picture does not work, Mathcad says "These units are not compatible." The units of M.w.mid are kip*ft, and 8 is dimensionless. There are no matrices in this spreadsheet, but for some reason the dot/multiplication symbol is acting weird, or like a dot product. I don't really want to use either of the middle equations, because they don't match AASHTO, but if I have to I will. For reference, the correct answer is 103.0kip. Mathcad 15 also returns 103.0kip without a dimension error. 

Hi Team,I am trying to resume some suppress features in part file.Resume option is not available..Any suggestion

Without using "ProMarcoExecute" and "RunMarco" , how to use the TOOLKIT or Object TOOLKIT to scale model ? I have been looking for the "Scale Model" function in the API Wizard, but unfortunately, I did not find it. Why don't I want Marco's way to execute "Scale Model", because the TOOLKIT or Object TOOLKIT program will lose control of CREO after executing marco. Is there a way for the program to keep control of CREO? 

HelloI have a table with many indications about a threading including the helix angle. my part and the drawing are in mm and degrees°, but for a supplier we need the have the angle in degree minute second in the table. I looked at the information page with all the &parameter and didn't find how to change the unit just for this value (not the whole file).I think it may be &parameter[something here] just as the number of decimals.Do you know how to do it please ?What I want : What I have :

I am using Creo Parametric Release 8.0 and Datecode8.0.0.0Hello, we have produced a Creo C++ otk plugin - all works fine. But we have a problem with how we deploy. We use TeamCity https://www.jetbrains.com/teamcity/ to run our build pipeline (so we must build all the code and then use the resultant dll for packaging up. We know that we have to use protk_unlock.bat to unlock the dll. The problem is that we have multiple servers to do the Team city builds and teh same one is not used each time. We are assuming that Creo has to be installed on those machines and also the licenses can only be set up on manual install. Is is possible to do unlocking in a less heavyweight way (but still access the license server that allows protk_unlock.exe to run)? I hope this makes some kind of sense? Can give more details if needed. Any suggestions welcome

Hi, when I display a shaded view into my 2D drawing (i.e. to show painted areas) is it possible to activate in this view different appearance settings which I have defined in View Manger?

Hi,How can I resume an already suppressed feature by using relations? For example:IF d12==100ADD SUPPRESSED FEATURE     INTERNAL FEATURE ID  570     PARENTS = 410(#12) 1305(#17)AND ADDAND IF If the feature is already suppressed and the equation (if d12==100) is true, the feature that gets added is in a suppressed state. How can I fix this?Is there a conditional statment that removes "SUPPRESSED"?Or is there a syntax in pro program that will regenerate automatically?

How do I add tolerance to a dimension from an inheritance feature?Tolerance in the model is set to symmetry but after inheritance the Tolerance is at Nominal and can not be changed (greyed out)This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.

I am trying to create a vector with values like this1, 2, 3, 4, 4.2, 4.4, 4.6, 4.8, 5, 6, 7, 8In practice there will be many more values and it wouldn't be practical to enter them one at a time. If I create three vectors like thisv1 := 1,2..4v2 = 4.2,.4...4.8v3 = 5,6..8Is there some way I can combine them into a single vector?Also, I would like the resulting vector to be a row vector rather than a column vector (if that is possible).

Hello, everybody, Does anyone meet the problem when saving the part file to step, the lattice design is missing?For example, in the first picture, I created a lattice structure, I then saved it as step file.But when I open the step file, it appeared as the second picture.

We are an engineering company in the Northeast with offices in MA & VA. And we have suppliers in many states in the USA, and some outside. We have situations where we want engineers from our 2 offices, sometimes co-development partners and, more often, suppliers to review designs and provide written feedback and/or preliminary quotes or DFM issues. We do not want to open up our PLM system to anyone outside.If you or your company have faced this issue and have implemented a solution, I would appreciate if you could share some details about your experiences.ThanksKristin

Hi, is there any chance for me to make contour plot which will look the same as the  A-B plot I sent you, but I want that the greater the value of member of array C for designated position is, the color of point for that position would be closer to red (classic contour plot with rainbow colors). Best regards and thanks in advance.

I tried to apply the license file I got from email: mathcadlicensing@ptc.com and I got the following error message:11/21/2022 3:31:11 PM : The license request failed.Requesting MathcadPrime ...C:\Users\binping\Desktop\sw_license_email_89209.dat: (-103) Cannot checkout an uncounted license within a Windows Terminal Services guest session.

Is there a way to set the default zoom value when using the common files - workspace as i keep having to use the mouse wheel to zoom in/out.